Modeling of Process Intensification

Preface. List of Contributors. 1 Modeling of Process Intensifi cation - An Introduction and Overview (Frerich J. Keil). 2 Process Intensifi cation - An Industrial Point of View (Robert Franke). 2.1 Introduction. 2.1.1 Remarks on the Term Process Intensification. 2.1.2 Management Aspects. 2.2 Microreaction Technology. 2.2.1 Principal Features. 2.2.2 Catalytic Wall Reactors. 2.3 Simulation. 2.3.1 Introduction. 2.3.2 Molecular Simulations. 2.3.2.1 Quantum-chemical Calculations. 2.3.2.2 COSMO-RS Calculations. 2.3.2.3 Molecular-dynamics Calculations. 2.3.3 Monte Carlo Simulations in Project Valuation under Risk. 3 Modeling and Simulation of Microreactors (Steffen Hardt). 3.1 Introduction. 3.2 Flow Distributions. 3.2.1 Straight Microchannels. 3.2.2 Periodic and Curved Channel Geometries. 3.2.3 Multichannel Flow Domains. 3.3 Heat Transfer. 3.3.1 Straight Microchannels. 3.3.2 Periodic and Curved Channel Geometries. 3.3.3 Multichannel Flow Domains. 3.3.4 Micro Heat Exchangers. 3.4 Mass Transfer and Mixing. 3.4.1 Simple Mixing Channels. 3.4.2 Chaotic Micromixers. 3.4.3 Multilamination Micromixers. 3.4.4 Hydrodynamic Dispersion. 3.5 Chemical Kinetics. 3.5.1 Numerical Methods for Reacting Flows. 3.5.2 Reacting Channel Flows. 3.5.3 Heat-exchanger Reactors. 3.6 Conclusions and Outlook. 4 Modeling and Simulation of Unsteady-state-operated Trickle-flow Reactors (Rudiger Lange). 4.1 Introduction. 4.2 Modeling. 4.3 Reactor Model. 4.4 Simulation. 4.5 Conclusion. 5 Packed-bed Membrane Reactors (Akos Tota, Dzmitry Hlushkou, Evangelos Tsotsas, and Andreas Seidel-Morgenstern). 5.1 Introduction. 5.1.1 The PBMR Principle. 5.1.2 Case Study. 5.1.3 Porous Membranes. 5.1.4 Outline. 5.2 One-dimensional Modeling of Packed-bed Membrane Reactors. 5.2.1 One-dimensional Pseudohomogeneous Model. 5.2.2 Cofeed (FBR) vs. Distributed Dosing of Reactants (PBMR) - Nonreactive Conditions. 5.2.3 Comparison between FBR and PBMR - Reactive Conditions. 5.2.4 Nonisothermal Operation. 5.3 Two-dimensional Modeling of Packed-bed Membrane Reactors. 5.3.1 Two-dimensional Model of PBMR - The Momentum-balance Equation. 5.3.2 Two-dimensional Model of PBMR - The Mass-balance Equation. 5.3.3 Two-dimensional Model of PBMR - The Energy-balance Equation. 5.3.4 Boundary Conditions. 5.3.5 Numerical Solution of the Two-dimensional Model. 5.3.6 Velocity Field in a Packed-bed Membrane Reactor. 5.3.7 The Influence of Membrane Permeability on the Boundary Conditions. 5.3.8 Effect of Porosity Profile. 5.3.9 Effect of Radial Mass-transport Limitations. 5.3.10 Comparison of the l(r)- and aw-model Concepts - Temperature Profiles in a PBMR. 5.4 Three-dimensional Modeling of a Packed-bed Membrane Reactor. 5.4.1 Introduction to the Large-scale Simulation Methods in Fluid Mechanics and Mass Transport. 5.4.2 Pressure and Velocity Field (Varying the Flow Distribution) - Comparison between FBR and PBMR. 5.4.3 Advective-diffusive Mass Transport in PBMR. 5.5 Summary and Conclusion. 6 The Focused Action of Surface Tension versus the Brute Force of Turbulence - Scaleable Microchannel-based Process Intensification using Monoliths (Michiel T. Kreutzer, Annelies van Diepen, Freek Kapteijn, and Jacob A. Moulijn). 6.1 Introduction. 6.2 Monoliths - A Scalable Microchannel Technology. 6.3 Power Required for Gas-Liquid Dispersion. 6.3.1 Turbulent Contactors. 6.3.2 Laminar Contactors. 6.4 Physical Adsorption of Oxygen. 6.5 Three-phase Processes. 6.6 Discussion. 6.6.1 Design Considerations for Intensified Monolith Processes. 6.7 Conclusions. 7 Chemical Reaction Modeling in Supercritical Fluids in Special Consideration of Reactions in Supercritical Water (Andrea Kruse and Eckhard Dinjus). 7.1 Introduction. 7.2 Properties of Supercritical Fluids. 7.3 The C-C-bond Splitting of Tert.-butylbenzene. 7.3.1 Experimental. 7.3.2 Modeling. 7.4 Total Oxidation in Supercritical Fluids. 7.4.1 Is Oxidation in CO 2 the same as Oxidation in Water? 7.4.2 Experimental. 7.4.3 Modeling. 7.5 Glycerol Degradation. 7.5.1 Modeling. 7.6 Conclusion. 8 Ultrasound Reactors. 8.1 Some Fundamentals of Ultrasonics and the Design of High Energy Density Cravice Reactors (Christian Horst). 8.1.1 Introduction. 8.1.2 Bubble Behavior in Acoustic Fields. 8.1.2.1 Equations for the Motion of the Bubble Wall. 8.1.2.2 Cavitation Thresholds. 8.1.2.3 Influence of Parameters on Cavitation Behavior. 8.1.2.4 Cavitation near Solid Boundaries. 8.1.2.5 Finite Amplitude Waves and Shock Waves. 8.1.2.6 Streaming. 8.1.2.7 Bjerknes Forces. 8.1.2.8 Forces on Small Particles. 8.1.2.9 Sonochemical Effects. 8.1.3 Modeling of Sound Fields. 8.1.4 Examples of Sound Fields in Ultrasound Reactors. 8.1.4.1 High-amplitude-High Energy Density Conical Reactor. 8.1.4.2 Low-amplitude-High Energy Density Crevice Reactor. 8.1.5 Modeling of Sonochemical Effects in Ultrasound Reactors. 8.1.6 Summary. 8.2 Design of Cavitational Reactors (Parag R. Gogate and Aniruddha B. Pandit). 8.2.1 Introduction. 8.2.2 Theoretical Approach. 8.2.2.1 Identification of Stable or Transient Cavitation. 8.2.2.2 Effect of Compressibility of Medium. 8.2.2.3 Optimization of Operating Parameters. 8.2.2.4 Development of Design Equations. 8.2.3 Distribution of the Cavitational Activity in the Reactors. 8.2.4 Intensification of Cavitational Activity in the Sonochemical Reactors. 8.2.4.1 Use of Process-intensifying Parameters. 8.2.4.2 Use of Combination of Cavitation and Advanced Oxidation Processes. 8.2.5 Design of a Pilot-scale Reactor and its Experimental Evaluation. 8.2.5.1 Rational for the Design of a Reactor. 8.2.5.2 Actual Design of the Novel Reactor. 8.2.5.3 Comparison of the Efficacy of the Hexagonal Flow-cell Reactor with Conventional Designs. 8.2.6 Hydrodynamic Cavitation Reactors. 8.2.6.1 Engineering Design of Hydrodynamic Cavitation Reactors. 8.2.7 Comparison of Cavitational Yields in Acoustic and Hydrodynamic Cavitation. 8.2.8 Qualitative Considerations for Reactor Choice, Scaleup and Optimization. 8.2.9 Efforts Needed in the Future. 8.2.10 Concluding Remarks. 9 Modeling of Simulated Moving-bed Chromatography (Monika Johannsen). 9.1 Introduction. 9.2 From Elution Chromatography to Countercurrent Chromatography. 9.2.1 The TMB Process. 9.2.2 The SMB Process. 9.3 Applications of SMB Chromatography. 9.4 Modeling of Chromatographic Processes. 9.4.1 Modeling of Single-column Chromatography. 9.4.1.1 Ideal Model. 9.4.1.2 Dispersive Model. 9.4.1.3 Equilibrium Dispersive Model. 9.4.1.4 Linear Driving Force (LDF) Model. 9.4.1.5 General Rate Model. 9.4.1.6 Initial and Boundary Conditions for Single-column Chromatography. 9.4.2 Modeling of SMB Chromatography. 9.4.2.1 Model Classification. 9.4.2.2 Modeling of the TMB Process. 9.4.2.3 Modeling of the SMB Process. 9.4.2.4 Solution of the TMB Model with the Triangle Theory. 9.4.2.5 Consideration of Different Adsorption Coefficients in the Zones. 9.4.2.6 Modeling of Pressure Gradient in SFC. 9.4.3 Numerical Algorithms. 9.5 Simulations of SMB-SFC Chromatography. 9.5.1 Separation of Cis/trans-Isomers of Phytol. 9.5.2 Separation of Enantiomers of (R,S)-Ibuprofen. 9.5.3 Separation of Tocopherols. 9.6 Conclusion. 10 Modeling of Reactive Distillation (Eugeny Y. Kenig and Andrzej Gorak). 10.1 Introduction. 10.2 Characteristics of Reactive Distillation. 10.2.1 Column Internals for Reactive Distillation. 10.3 Modeling Principles of Reactive Distillation. 10.3.1 General Aspects. 10.3.2 Equilibrium-stage Model. 10.3.3 Rate-based Approach. 10.3.3.1 Balance Equations. 10.3.3.2 Mass Transfer and Reaction Coupling in the Fluid Film. 10.3.3.3 Nonideal Flow Behavior in Catalytic Column Internals. 10.3.3.4 Dynamic Modeling. 10.4 Case Studies. 10.4.1 Methyl Acetate Synthesis. 10.4.1.1 Process Description. 10.4.1.2 Process Modeling. 10.4.1.3 Results and Discussion. 10.4.2 Methyl Tertiary Butyl Ether. 10.4.2.1 Process Description. 10.4.2.2 Process Modeling. 10.4.2.3 Results and Discussion. 10.4.3 Ethyl Acetate Synthesis. 10.4.3.1 Process Description. 10.4.3.2 Process Modeling. 10.4.3.3 Results and Discussion. 10.4.4 Dymethyl Carbonate Transesterification. 10.4.4.1 Process Description. 10.4.4.2 Process Modeling. 10.4.4.3 Results and Discussion. 10.5 Conclusions and Outlook. 11 Experimental and Theoretical Explorations of Weak- and Strong-gradient Magnetic Fields in Chemical Multiphase Processes (Faical Larachi). 11.1 Background. 11.1.1 Nonmagnetic Fluids. 11.1.2 Magnetic Fluids. 11.2 Nonmagnetic Fluids. 11.2.1 Principle. 11.2.2 Theory. 11.2.3 Experimental Results and Discussion. 11.3 Magnetic Fluids. 11.3.1 Principle. 11.3.2 Theory. 11.3.2.1 Local Description. 11.3.2.2 Upscaling. 11.3.2.3 Closure Problem. 11.3.2.4 Zero-order Axisymmetric Volume-average Model. 11.3.3 Results and Discussion. 11.4 Concluding Remarks. Index.