Evaluating diffraction based overlay metrology for double patterning technologies

Demanding sub-45 nm node lithographic methodologies such as double patterning (DPT) pose significant challenges for overlay metrology. In this paper, we investigate scatterometry methods as an alternative approach to meet these stringent new metrology requirements. We used a spectroscopic diffraction-based overlay (DBO) measurement technique in which registration errors are extracted from specially designed diffraction targets for double patterning. The results of overlay measurements are compared to traditional bar-in-bar targets. A comparison between DBO measurements and CD-SEM measurements is done to show the correlation between the two approaches. We discuss the total measurement uncertainty (TMU) requirements for sub-45 nm nodes and compare TMU from the different overlay approaches.

[1]  Roger Lowe-Webb,et al.  Novel diffraction-based spectroscopic method for overlay metrology , 2003, SPIE Advanced Lithography.

[2]  Harry J. Levinson,et al.  Evaluating the performance of a 193-nm hyper-NA immersion scanner using scatterometry , 2007, SPIE Advanced Lithography.

[3]  Joerg Bischoff,et al.  Light-diffraction-based overlay measurement , 2001, SPIE Advanced Lithography.

[4]  Vladimir Levinski,et al.  Differential signal scatterometry overlay metrology: an accuracy investigation , 2007, SPIE Optical Metrology.

[5]  Nigel P. Smith,et al.  Advances in optical metrology for the 1990s , 1990, Advanced Lithography.

[6]  Nigel Smith,et al.  Overlay metrology at the crossroads , 2008, SPIE Advanced Lithography.

[7]  Christopher P. Ausschnitt,et al.  Multilayer overlay metrology , 2006, SPIE Advanced Lithography.

[8]  Mircea Dusa,et al.  Application of optical CD for characterization of 70nm dense lines , 2005, SPIE Advanced Lithography.

[9]  Ray Hoobler,et al.  Optical critical dimension (OCD) measurments for profile monitoring and control: applications for mask inspection and fabrication , 2003, SPIE Photomask Technology.

[10]  Yi-Sha Ku,et al.  In-chip overlay measurement by existing bright-field imaging optical tools , 2005, SPIE Advanced Lithography.

[11]  Kenneth C. Johnson,et al.  Scatterometry-based overlay metrology , 2003, SPIE Advanced Lithography.

[12]  Harry J. Levinson,et al.  Evaluating a scatterometry-based focus monitor technique for hyper-NA lithography , 2007, SPIE Advanced Lithography.

[13]  Sunyoung Koo,et al.  Issues and challenges of double patterning lithography in DRAM , 2007, SPIE Advanced Lithography.

[14]  P. Dasari,et al.  Blossom overlay metrology implementation , 2007, SPIE Advanced Lithography.

[15]  Xiaodong Zhang,et al.  Measurement of deep silicon trench profile using normal incidence optical CD metrology , 2005, SPIE Advanced Lithography.

[16]  Sheng-Hua Lu,et al.  Comparisons of overlay measurement using conventional bright-field microscope and angular scatterometer , 2005, SPIE Advanced Lithography.