Impinging cooling of film hole surface using transient liquid crystal thermograph

[1]  Jer‐Huan Jang,et al.  Experimental study on the heat transfer under impinging elliptic jet array along a film hole surface using liquid crystal thermograph , 2009 .

[2]  Jr-Ming Miao,et al.  Numerical approach to hole shape effect on film cooling effectiveness over flat plate including internal impingement cooling chamber , 2006 .

[3]  Noam Lior,et al.  Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling , 2006 .

[4]  Ricardo Martinez-Botas,et al.  Jet impingement on a dimpled surface with different crossflow schemes , 2005 .

[5]  C. Soong,et al.  Measurement of detailed heat transfer on a surface under arrays of impinging elliptic jets by a transient liquid crystal technique , 2004 .

[6]  Pil-Hyun Yoon,et al.  Local heat/mass transfer and flow characteristics of array impinging jets with effusion holes ejecting spent air , 2003 .

[7]  Wei-Mon Yan,et al.  Experimental Study of Surface-Mounted Obstacle Effects on Heat Transfer Enhancement by Using Transient Liquid Crystal Thermograph , 2002 .

[8]  Jenn-Jiang Hwang,et al.  Impingement cooling in triangular ducts using an array of side-entry wall jets , 2001 .

[9]  Je-Chin Han,et al.  Impingement heat transfer on dimpled surfaces using a transient liquid crystal technique , 2000 .

[10]  Je-Chin Han,et al.  Detailed heat transfer distributions under an array of orthogonal impinging jets , 1998 .

[11]  M. Chyu,et al.  Determination of Local Heat Transfer Coefficient Based on Bulk Mean Temperature Using a Transient Liquid Crystals Technique , 1997 .

[12]  Raymond Viskanta,et al.  Effect of jet-jet spacing on convective heat transfer to confined, impinging arrays of axisymmetric air jets , 1994 .

[13]  B. W. Webb,et al.  Enhancement of Liquid Jet Impingement Heat Transfer With Surface Modifications , 1994 .

[14]  Lee Sang-Joon,et al.  Local heat transfer measurements from an elliptic jet impinging on a flat plate using liquid crystal , 1994 .

[15]  T. V. Jones,et al.  Detailed Measurements of Local Heat Transfer Coefficient and Adiabatic Wall Temperature Beneath an Array of Impinging Jets , 1993 .

[16]  S. Hsieh,et al.  Heat Transfer and Friction Factor Measurements in Ducts With Staggered and In-Line Ribs , 1993 .

[17]  R. Viskanta.  Heat transfer to impinging isothermal gas and flame jets , 1993 .

[18]  Chie Gau,et al.  Surface Curvature Effect on Slot-Air-Jet Impingement Cooling Flow and Heat Transfer Process , 1991 .

[19]  James W. Baughn,et al.  Heat Transfer Measurements From a Surface With Uniform Heat Flux and an Impinging Jet , 1989 .

[20]  Jie Han,et al.  Heat transfer and friction characteristics in rectangular channels with rib turbulators , 1988 .

[21]  Thomas A. Trabold,et al.  Impingement Heat Transfer Within Arrays of Circular Jets: Part 1—Effects of Minimum, Intermediate, and Complete Crossflow for Small and Large Spacings , 1987 .

[22]  Richard J Goldstein,et al.  Visualization of heat transfer from arrays of impinging jets , 1982 .

[23]  C. R. Truman,et al.  Streamwise Flow and Heat Transfer Distributions for Jet Array Impingement with Crossflow , 1981 .