Scratch drive actuator with mechanical links for self-assembly of three-dimensional MEMS

The self-assembling of three-dimensional (3-D) MEMS from polysilicon surface micromachined part is very attractive. To avoid risky external manipulation, the practical use of integrated actuator to perform the assembling task is required. To that goal, this paper presents detailed characteristics of the electrostatic surface micromachined scratch drive actuator (SDA). First, from numerous SDA tests, it is shown that this actuator is able to produce a threshold force of 30 /spl mu/N, with a yield above 60%. With polysilicon devices consisting of SDA mechanically linked to buckling beam, a horizontal force of 63 mN has been demonstrated with /spl plusmn/112 V pulse, and up to 100 /spl mu/N can be obtained with higher voltage. With buckling beams, displacements up to 150 /spl mu/m have been obtained in the vertical direction. The generation of vertical force of 10 /spl mu/N was confirmed with a 100 /spl mu/m displacement producing 1 nJ work in the vertical direction. Finally, SDA overcomes the usual sticking of surface machined polysilicon by producing enough vertical force to completely release wide polysilicon plate (500 /spl mu/m/spl times/50 /spl mu/m) without external manipulation. The above characteristic, both in terms of structure releasing and vertical/horizontal forces and displacements provides the SDA with the capability of self-assembling complex 3-D polysilicon part, opening new integration capabilities and new application field of MEMS.

[1]  M. Mehregany,et al.  A simple fabrication process for polysilicon side-drive micromotors , 1994 .

[2]  Stefan Johansson,et al.  Assembling three-dimensional microstructures using gold-silicon eutectic bonding , 1994 .

[3]  K. Pister,et al.  Standard CMOS piezoresistive sensor to quantify heart cell contractile forces , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[4]  H. Fujita,et al.  A quantitative analysis of Scratch Drive Actuator using buckling motion , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[5]  H. Miyazaki,et al.  Fabrication of 3D quantum optical devices by pick-and-place forming , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[6]  Hiroyuki Fujita,et al.  The Reshaping Technology for Three Dimensional Polysilicon Microstructures , 1997 .

[7]  Ming C. Wu,et al.  Micromachined integrated optics for free-space interconnections , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[8]  K. Pister.  Hinged polysilicon structures with integrated CMOS TFTs , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[9]  Yotaro Hatamura,et al.  Construction of 3-D micro structure by multi-face FAB, co-focus rotational robot and various mechanical tools , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[10]  Khalil Najafi,et al.  Vertical comb array microactuators , 1995 .

[11]  Kam Y. Lau,et al.  Surface-micromachined electrostatic-comb driven scanning micromirrors for barcode scanners , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[12]  Terunobu Akiyama,et al.  Controlled stepwise motion in polysilicon microstructures , 1993 .

[13]  R. Muller,et al.  Linear microvibromotor for positioning optical components , 1995 .

[14]  K. Pister,et al.  Microelectromechanical Components For Articulated Microrobots , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[15]  Jan H. J. Fluitman,et al.  Electrostatic microactuators with integrated gear linkages for mechanical power transmission , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[16]  E. Smela,et al.  Controlled Folding of Micrometer-Size Structures , 1995, Science.

[17]  I. Shimoyama,et al.  Insect-model based microrobot with elastic hinges , 1994 .