Cytotoxicity and thermomechanical behavior of biomedical shape-memory polymer networks post-sterilization

Shape-memory polymers (SMPs) are being increasingly proposed for use in biomedical devices. This paper investigates the cytotoxicity, surface characteristics and thermomechanics of two acrylate-based SMP networks as a function of sterilization using a minimal essential media elution test, FTIR-ATR and dynamic mechanical analysis (DMA). Networks sterilized by low-temperature plasma elicited a cytotoxic response and are shown to completely destroy the cell monolayer. FTIR-ATR analysis showed evidence of surface oxidation with an increase and broadening of the absorbance peak from approximately 3500 to 3100 cm(-1), which is associated with an increase in hydroxyl groups. DMA revealed small, but statistically significant, differences in reduction of the glass transition temperatures of both networks when sterilized with gamma irradiation. One network showed an increase in rubbery modulus, which is an indication of crosslink density, after gamma irradiation. Lastly, practical sterilization concerns of SMP devices are discussed in light of the different methods.

[1]  R. Clough.  High-energy radiation and polymers: A review of commercial processes and emerging applications , 2001 .

[2]  A Lendlein,et al.  Shape-memory polymers as stimuli-sensitive implant materials. , 2005, Clinical hemorheology and microcirculation.

[3]  Robert Langer,et al.  Convergence in biomedical technology , 2006, Nature Biotechnology.

[4]  S. Peniston,et al.  Effect of sterilization on the physicochemical properties of molded poly(L-lactic acid). , 2007, Journal of biomedical materials research. Part B, Applied biomaterials.

[5]  Kristi S Anseth,et al.  Controlled release from crosslinked degradable networks. , 2002, Critical reviews in therapeutic drug carrier systems.

[6]  C. Barwell,et al.  Ethylene oxide sterilization in hospital practice , 1960, Journal of Hygiene.

[7]  S J Bryant,et al.  Cytocompatibility of UV and visible light photoinitiating systems on cultured NIH/3T3 fibroblasts in vitro , 2000, Journal of biomaterials science. Polymer edition.

[8]  J. Rosiak,et al.  Poly(ε-caprolactone) Biomaterial Sterilized by E-Beam Irradiation , 2006 .

[9]  R. Langer,et al.  Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications , 2002, Science.

[10]  Robin Shandas,et al.  Unconstrained recovery characterization of shape-memory polymer networks for cardiovascular applications. , 2007, Biomaterials.

[11]  A. Pennings,et al.  The effects of different steam-sterilization programs on material properties of poly(L-lactide). , 1991, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[12]  J. Torrado,et al.  Effect of c-Sterilization Process on PLGA Microspheres Loaded with Insulin-Like Growth Factor - I (IGF-I) , 2003, Journal of biomaterials applications.

[13]  Jie Wu,et al.  A thermo- and pH-sensitive hydrogel composed of quaternized chitosan/glycerophosphate. , 2006, International journal of pharmaceutics.

[14]  A Lendlein,et al.  In vitro cytotoxicity testing of AB-polymer networks based on oligo(epsilon-caprolactone) segments after different sterilization techniques. , 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

[15]  J. Kelsey.  Sterilization by ethylene oxide , 1961, Revue de l'infirmiere.

[16]  P. Nair.  Currently Practised Sterilization Methods-Some Inadvertent Consequences , 1995, Journal of biomaterials applications.

[17]  H. E. Williams,et al.  The effect of γ-irradiation and polymer composition on the stability of PLG polymer and microspheres , 2006 .

[18]  D. Farrar,et al.  Investigation into depth dependence of effect of E-beam radiation on mechanical and degradation properties of polylactide , 2006 .

[19]  D. Mantovani,et al.  Shape Memory Materials for Biomedical Applications , 2002 .

[20]  R. Silverstein,et al.  Spectrometric identification of organic compounds , 2013 .

[21]  M Santucci,et al.  Gamma irradiation effects on poly(DL-lactictide-co-glycolide) microspheres. , 1998, Journal of controlled release : official journal of the Controlled Release Society.

[22]  Y. Ikarashi,et al.  Cytotoxicity of medical materials sterilized with vapour-phase hydrogen peroxide. , 1995, Biomaterials.

[23]  C. Ooi,et al.  Influence of electron-beam radiation on the hydrolytic degradation behaviour of poly(lactide-co-glycolide) (PLGA). , 2005, Biomaterials.

[24]  R. Langer,et al.  Drug delivery and targeting. , 1998, Nature.

[25]  J C Middleton,et al.  Synthetic biodegradable polymers as orthopedic devices. , 2000, Biomaterials.

[26]  S. Santavirta,et al.  Bioabsorbable fixation devices in trauma and bone surgery: current clinical standing , 2004, Expert review of medical devices.

[27]  Yiping Liu,et al.  Thermomechanics of the shape memory effect in polymers for biomedical applications. , 2005, Journal of biomedical materials research. Part A.

[28]  R. Langer,et al.  Polymeric triple-shape materials , 2006, Proceedings of the National Academy of Sciences.

[29]  L. Yahia,et al.  Safety of plasma-based sterilization: surface modifications of polymeric medical devices induced by Sterrad and Plazlyte processes. , 2002, Bio-medical materials and engineering.