The effect of tube bending, heat treatment and loading paths on process responses of hydroforming for automobile intercooler pipe: numerical and experimental investigations

[1]  Shi-Hong Zhang,et al.  Numerical and experimental study on large deformation of thin-walled tube through hydroforging process , 2016 .

[2]  Liuan Wang,et al.  Hydroforming simulation and experiment of clad T-shapes , 2016 .

[3]  Mario Fafard,et al.  Global optimisation of the production of complex aluminium tubes by the hydroforming process , 2015 .

[4]  Xizhang Chen,et al.  Monte Carlo simulation and experimental measurements of grain growth in the heat affected zone of 304 stainless steel during multipass welding , 2015 .

[5]  Hong-wu Song,et al.  Formability improvement of austenitic stainless steel by pulsating hydroforming , 2015 .

[6]  Liu Hongbing,et al.  Investigation on the maximum thinning and protrusion height of the hydroformed 316L SS/Al clad T-branch , 2014 .

[7]  Hong-wu Song,et al.  In situ X-ray diffraction study of martensitic transformation in austenitic stainless steel during cyclic tensile loading and unloading , 2012 .

[8]  A. Alper Ozalp,et al.  Numerical modeling of the momentum and thermal characteristics of air flow in the intercooler connection hose , 2012 .

[9]  M. Kadkhodayan,et al.  An investigation of the optimal load paths for the hydroforming of T-shaped tubes , 2012 .

[10]  M. Kadkhodayan,et al.  An investigation of the optimal load paths for the hydroforming of T-shaped tubes , 2011, The International Journal of Advanced Manufacturing Technology.

[11]  Hong-wu Song,et al.  The enhancement of transformation induced plasticity effect on austenitic stainless steels by cyclic tensile loading and unloading , 2011 .

[12]  M. Parsa,et al.  Bending of Work Hardening Sheet Metals subjected to Tension , 2008 .

[13]  Bo Yang,et al.  Analysis and finite element simulation of the tube bulge hydroforming process , 2006 .

[14]  Matteo Strano,et al.  FEM analysis of tube pre-bending and hydroforming , 2004 .

[15]  Kristoffer Trana,et al.  Finite element simulation of the tube hydroforming process—bending, preforming and hydroforming , 2002 .

[16]  Soo-Ik Oh,et al.  The tube bending technology of a hydroforming process for an automotive part , 2001 .

[17]  Taylan Altan,et al.  Tube hydroforming: state-of-the-art and future trends , 2000 .

[18]  Shi-Hong Zhang,et al.  Developments in hydroforming , 1999 .

[19]  F. Dohmann,et al.  Hydroforming - a method to manufacture light-weight parts , 1996 .

[20]  Wenyu Yang,et al.  Analytical modelling of microstructure changes in the machining of 304 stainless steel , 2012 .