Street light systems are publicly accessible electrical pieces of equipment out of the physical control of who operates/owns them. Street lighting systems typically include low-voltage loads, distributed in a large area, and are collectively protected by the same device. Under fault conditions, hazardous potentials may appear on the metal enclosures of these systems, and expose people to shock hazards. To reduce the risk to an acceptable level, different solutions for the bonding and grounding are available. The Standard IEC 60364 and a current worldwide tendency seem to encourage the use of Class II equipment for the street light systems. Class II components, such as the wiring systems, the light fixtures, etc., have double or reinforced insulation. In this paper, these authors analyze technical alternatives to protect against indirect contact in light of the IEC standards. In order to elevate the level of safety offered by Class II metal poles, the adoption of special circuitry and bonding connections to continuously monitor the double insulation of metal poles is proposed.
[1]
Fabio Freschi,et al.
To Bond or Not to Bond: That is the Question
,
2011,
IEEE Transactions on Industry Applications.
[2]
Mark W. Earley,et al.
National electrical code handbook
,
2002
.
[3]
M. Mitolo.
On Outdoor Lighting Installations Grounding Systems
,
2014,
IEEE Transactions on Industry Applications.
[4]
M. Mitolo.
Is it Possible to Calculate Safety: Safety and Risk Analysis of Standard Protective Measures Against Electric Shock
,
2009,
IEEE Industry Applications Magazine.
[5]
G. Parise.
A summary on the IEC protection against electric shock
,
1997,
IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.
[6]
G. Parise.
A New Summary on the IEC Protection Against Electric Shock
,
2013,
IEEE Transactions on Industry Applications.