CO2-activated porous self-templated N-doped carbon aerogel derived from banana for high-performance supercapacitors

Abstract N-doped porous carbon materials derived from eco-friendly, renewable and economical biomass resources have attracted interest for applications in supercapacitors due to their porous structures and physicochemical properties. However, controlling the pore structure remains difficult and there is a need to simplify the N-doping process. Herein, we report a porous self-templated N-doped carbon aerogel derived from banana flesh obtained through one-step carbonization followed by CO2 activation. The specific surface area and pore distribution of the carbon aerogels could be controlled by changing the CO2 activation time. A specific surface area and total pore volume of 1414.97 m2 g−1 and 0.746 cm3 g−1 were achieved. The results show that raw banana flesh provides the necessary N content, which only slightly decreased following activation from 3.25% to 2.25%. On the surface of the carbon aerogel we detected pyrrolic N and pyridinic N groups, which are known to contribute to pseudo-capacitance. Furthermore, the specific capacitance of the prepared carbon aerogel reached 178.9 F g−1 at a current density of 1 A g−1. The simple preparation method and excellent electrochemical performance show great potential for application of our porous self-templated N-doped carbon aerogel as an electrode in high performance supercapacitors.

[1]  Wei Fan,et al.  Polymer/Carbon-Based Hybrid Aerogels: Preparation, Properties and Applications , 2015, Materials.

[2]  Shaopei Jia,et al.  Synthesis of nitrogen-doped mesoporous carbon from polyaniline with an F127 template for high-performance supercapacitors , 2017 .

[3]  Vijay Kumar Thakur,et al.  Advances in industrial prospective of cellulosic macromolecules enriched banana biofibre resources: A review. , 2015, International journal of biological macromolecules.

[4]  K. Khosla,et al.  Microstructure and electrochemical double-layer capacitance of carbon electrodes prepared by zinc chloride activation of sugar cane bagasse , 2010 .

[5]  L. Bello‐Pérez,et al.  Isolation and partial characterization of starch from banana cultivars grown in Colombia. , 2017, International journal of biological macromolecules.

[6]  B. Meyer,et al.  CO2 activation by ZnO through the formation of an unusual tridentate surface carbonate. , 2007, Angewandte Chemie.

[7]  Bucheng Li,et al.  Ultralight, compressible and multifunctional carbon aerogels based on natural tubular cellulose , 2016 .

[8]  Jin Wook Park,et al.  Hierarchical core/shell Janus-type α-Fe2O3/PEDOT nanoparticles for high performance flexible energy storage devices , 2016 .

[9]  Yiju Li,et al.  Nitrogen and sulfur co-doped porous carbon nanosheets derived from willow catkin for supercapacitors , 2016 .

[10]  Zesheng Li,et al.  Nitrogen-doped 3D Reduced Graphene Oxide/Polyaniline Composite as Active Material for Supercapacitor Electrodes , 2017 .

[11]  Lei Fu,et al.  Synthesis of Nitrogen‐Doped Graphene Using Embedded Carbon and Nitrogen Sources , 2011, Advanced materials.

[12]  H. Dacosta,et al.  CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell. , 2018, Journal of colloid and interface science.

[13]  Q. Cao,et al.  A high-capacity carbon prepared from renewable chicken feather biopolymer for supercapacitors , 2013 .

[14]  C. N. R. Rao,et al.  Synthesis, Structure, and Properties of Boron‐ and Nitrogen‐Doped Graphene , 2009, 0902.3077.

[15]  Jinpeng Han,et al.  Biomass-derived porous carbon materials with sulfur and nitrogen dual-doping for energy storage , 2015 .

[16]  Xinxin Guan,et al.  3D nitrogen-doped graphene aerogel nanomesh: Facile synthesis and electrochemical properties as the electrode materials for supercapacitors , 2017 .

[17]  Ching-ping Wong,et al.  Graphene-based nitrogen self-doped hierarchical porous carbon aerogels derived from chitosan for high performance supercapacitors , 2015 .

[18]  M. Oehzelt,et al.  Nitrogen-doped graphene: efficient growth, structure, and electronic properties. , 2011, Nano letters.

[19]  F. Béguin,et al.  Carbon materials for the electrochemical storage of energy in capacitors , 2001 .

[20]  Qingyu Li,et al.  Cationic starch as a precursor to prepare porous activated carbon for application in supercapacitor electrodes , 2008 .

[21]  Lei Zhang,et al.  A review of electrode materials for electrochemical supercapacitors. , 2012, Chemical Society reviews.

[22]  C. Blasi,et al.  Thermal and catalytic decomposition of wood impregnated with sulfur-and phosphorus-containing ammonium salts , 2008 .

[23]  P. Chu,et al.  Hierarchical porous carbon materials from nanosized metal-organic complex for high-performance symmetrical supercapacitor , 2018 .

[24]  Xueming Zhang,et al.  Fabrication of Biomass-Derived Carbon Aerogels with High Adsorption of Oils and Organic Solvents: Effect of Hydrothermal and Post-Pyrolysis Processes , 2016, Materials.

[25]  Wei You,et al.  Core-Shell Nitrogen-Doped Carbon Hollow Spheres/Co3 O4 Nanosheets as Advanced Electrode for High-Performance Supercapacitor. , 2018, Small.

[26]  R. Mokaya,et al.  Correction: Cigarette butt-derived carbons have ultra-high surface area and unprecedented hydrogen storage capacity , 2017, Energy & Environmental Science.

[27]  Hankwon Chang,et al.  High capacitance and energy density supercapacitor based on biomass-derived activated carbons with reduced graphene oxide binder , 2018, Carbon.

[28]  Jiangtian Li,et al.  Nanostructured carbon-metal oxide composite electrodes for supercapacitors: a review. , 2013, Nanoscale.

[29]  B. Wei,et al.  Supercapacitors from Activated Carbon Derived from Banana Fibers , 2007 .

[30]  D. Wright,et al.  A self-template synthesis of hierarchical porous carbon foams based on banana peel for supercapacitor electrodes , 2012 .

[31]  Jiming Hu,et al.  Rational design of uniformly embedded metal oxide nanoparticles into nitrogen-doped carbon aerogel for high-performance asymmetric supercapacitors with a high operating voltage window , 2016 .

[32]  U. Karsten,et al.  Intermediate pyrolysis and product identification by TGA and Py-GC/MS of green microalgae and their extracted protein and lipid components , 2013 .

[33]  Zongping Shao,et al.  Molten salt synthesis of nitrogen-doped carbon with hierarchical pore structures for use as high-performance electrodes in supercapacitors , 2015 .

[34]  Shuyan Gao,et al.  Self-assembly-template engineering nitrogen-doped carbon aerogels for high-rate supercapacitors , 2016 .

[35]  Xiaodong Wang,et al.  Nanocellulose-derived highly porous carbon aerogels for supercapacitors , 2016 .

[36]  Qun Xu,et al.  Fabrication of hierarchical porous hollow carbon spheres with few-layer graphene framework and high electrochemical activity for supercapacitor , 2018, Applied Surface Science.

[37]  A. B. Fuertes,et al.  One-step synthesis of ultra-high surface area nanoporous carbons and their application for electrochemical energy storage , 2018 .

[38]  X. Zhao,et al.  Biomass-derived carbon electrode materials for supercapacitors , 2017 .

[39]  Minkyu Kim,et al.  Fabrication of Highly Flexible, Scalable, and High‐Performance Supercapacitors Using Polyaniline/Reduced Graphene Oxide Film with Enhanced Electrical Conductivity and Crystallinity , 2014 .

[40]  Wei You,et al.  Hierarchical flower-like C/NiO composite hollow microspheres and its excellent supercapacitor performance , 2017 .

[41]  D. Xiao,et al.  Oxygen-rich hierarchical porous carbon made from pomelo peel fiber as electrode material for supercapacitor , 2017 .

[42]  Jun Yan,et al.  Nitrogen‐Doped Carbon Networks for High Energy Density Supercapacitors Derived from Polyaniline Coated Bacterial Cellulose , 2014 .

[43]  Bingjie Lv,et al.  Nitrogen and phosphorus co-doped carbon hollow spheres derived from polypyrrole for high-performance supercapacitor electrodes , 2018 .

[44]  Yi Cui,et al.  Toward N-Doped Graphene via Solvothermal Synthesis , 2011 .

[45]  Shourong Zheng,et al.  Adsorption of tannic acid and phenol on mesoporous carbon activated by CO2 , 2012 .

[46]  Shuyan Gao,et al.  Functional Groups and Pore Size Distribution Do Matter to Hierarchically Porous Carbons as High-Rate-Performance Supercapacitors , 2016 .

[47]  Boumediène Allaoua,et al.  Energy management of PEM fuel cell/ supercapacitor hybrid power sources for an electric vehicle , 2017 .

[48]  Tewodros Asefa,et al.  Synthesis and application of N-S-doped mesoporous carbon obtained from nanocasting method using bone char as heteroatom precursor and template , 2016 .

[49]  Wen‐Cui Li,et al.  Characterization of the microstructures of organic and carbon aerogels based upon mixed cresol–formaldehyde , 2001 .

[50]  Y. Liu,et al.  Nitrogen-doped graphene as efficient metal-free electrocatalyst for oxygen reduction in fuel cells. , 2010, ACS nano.

[51]  H. Dai,et al.  N-Doping of Graphene Through Electrothermal Reactions with Ammonia , 2009, Science.

[52]  Fuwei Liu,et al.  Facile Processing of Free-Standing Polyaniline/SWCNT Film as an Integrated Electrode for Flexible Supercapacitor Application. , 2017, ACS applied materials & interfaces.

[53]  Heng Wang,et al.  Graphene oxide quantum dot-derived nitrogen-enriched hybrid graphene nanosheets by simple photochemical doping for high-performance supercapacitors , 2017 .

[54]  D. Zhao,et al.  Carbon Materials for Chemical Capacitive Energy Storage , 2011, Advanced materials.

[55]  Wenzhong Shen,et al.  Honeycomb-like composite structure for advanced solid state asymmetric supercapacitors , 2017 .

[56]  Shuhong Yu,et al.  Synthesis of nitrogen-doped porous carbon nanofibers as an efficient electrode material for supercapacitors. , 2012, ACS nano.

[57]  Jun Hu,et al.  Nitrogen‐Doped Porous Molybdenum Carbide and Phosphide Hybrids on a Carbon Matrix as Highly Effective Electrocatalysts for the Hydrogen Evolution Reaction , 2018 .

[58]  M. Fröba,et al.  Increase of porosity by combining semi-carbonization and KOH activation of formaldehyde resins to prepare high surface area carbons for supercapacitor applications , 2018 .