Bonding strength and thermal shock resistance of a novel bilayer ( c ‐AlPO 4 ‐SiC w ‐mullite)/SiC coated carbon fiber reinforced CMCs

[1]  K. Rezwan,et al.  Damage analysis of 2.5D C/C-SiC composites subjected to fatigue loadings , 2019, Journal of the European Ceramic Society.

[2]  W. Zhou,et al.  Microstructural evolution of SiC coating on C/C composites exposed to 1500 °C in ambient air , 2019, Ceramics International.

[3]  Y. Long,et al.  Mechanical properties of CVD-SiC coatings with Si impurity , 2018, Ceramics International.

[4]  Xiaohui Wang,et al.  Mullite-bonded SiC-whisker-reinforced SiC matrix composites: Preparation, characterization, and toughening mechanisms , 2018, Journal of the European Ceramic Society.

[5]  Fuyuan Wang,et al.  Influence of SiC fiber on thermal cycling lifetime of SiC fibers /YSZ thermal barrier coatings by atmospheric plasma spraying , 2018, Ceramics International.

[6]  X. Xiong,et al.  Effect of free carbon on micro-mechanical properties of a chemically vapor deposited SiC coating , 2018, Ceramics International.

[7]  Liu Guangde,et al.  Oxidation behavior and high-temperature flexural property of CVD-SiC-coated PIP-C/SiC composites , 2018, Ceramics International.

[8]  Yan Jiang,et al.  Microstructure and oxidation behaviors of dense mullite‑silicon carbide‑silicon coating for graphite fabricated by dipping-pyrolysis and reactive infiltration , 2018, Surface and Coatings Technology.

[9]  Yang Li,et al.  LPCVD-based SiO 2 /SiC multi-layers coating on graphite for improved anti-oxidation at wide-ranged temperatures , 2018, Composites Part B: Engineering.

[10]  Chaobo Huang,et al.  Microstructures and mechanical properties of aligned electrospun carbon nanofibers from binary composites of polyacrylonitrile and polyamic acid , 2018, Journal of Materials Science.

[11]  L. Berthe,et al.  High temperature durability of a bond-coatless plasma-sprayed thermal barrier coating system with laser textured Ni-based single crystal substrate , 2018 .

[12]  F. Hou,et al.  Bonding strength and thermal shock resistance of glass coatings on anisotropic mullite fibrous ceramics , 2018 .

[13]  Q. Ma,et al.  Fabrication and oxidation resistance of mullite/yttrium silicate multilayer coatings on C/SiC composites , 2017, Journal of Advanced Ceramics.

[14]  Jianfeng Huang,et al.  In-situ mullite whisker to improve the thermal shock resistance of silicate glass coating for SiC coated carbon/carbon composites , 2017 .

[15]  Ying Wang,et al.  Microstructure and oxidation resistant behavior of Er2Si2O7 and Er2Si2O7/LaMgAl11O19 coatings deposited on Cf/SiC composites by APS at 1723 K , 2017 .

[16]  W. Krenkel,et al.  Mechanical behavior of LSI based C/C-SiC composites subjected to flexural loadings , 2017 .

[17]  Zhuan Li,et al.  Oxidation behavior of C/C composites with SiC/ZrSiO 4 –SiO 2 coating , 2017 .

[18]  Ying Wang,et al.  Fabrication and oxidation resistant behavior of plasma sprayed Si/Yb2Si2O7/LaMgAl11O19 coating for Cf/SiC composites at 1673 K , 2017 .

[19]  Hejun Li,et al.  Mechanical and oxidation protective properties of SiC nanowires-toughened SiC coating prepared in-situ by a CVD process on C/C composites , 2016 .

[20]  W. Krenkel,et al.  Fatigue behavior and residual strength evolution of 2.5D C/C-SiC composites , 2016 .

[21]  Yu Xiaoyu,et al.  Thermal cycling behavior and oxidation resistance of SiC whisker-toughened-mullite/SiC coated carbon/carbon composites in burner rig tests , 2016 .

[22]  Yu Xiaoyu,et al.  Microstructure and oxidation behavior of sol–gel mullite coating on SiC-coated carbon/carbon composites , 2015 .

[23]  Hejun Li,et al.  Oxidation protection of ultra-high temperature ceramic ZrxTa1−xB2–SiC/SiC coating prepared by in-situ reaction method for carbon/carbon composites , 2015 .

[24]  Hejun Li,et al.  Ablation behavior of Y2SiO5/SiC coating for C/C composites under oxyacetylene torch , 2014 .

[25]  Lai-fei Cheng,et al.  Structure design and fabrication of environmental barrier coatings for crack resistance , 2014 .

[26]  Lai-fei Cheng,et al.  Effect of SiC coating and heat treatment on the thermal radiation properties of C/SiC composites , 2014 .

[27]  Hui-di Zhou,et al.  Tribological and Thermal Properties of Mullite Coating Prepared by Atmospheric Plasma Spraying , 2014, Journal of Thermal Spray Technology.

[28]  Xizhi Fan,et al.  A new double layer oxidation resistant coating based on Er2SiO5/LaMgAl11O19 deposited on C/SiC composites by atmospheric plasma spraying , 2013 .

[29]  Jianfeng Huang,et al.  Microstructure and oxidation resistance of C-AlPO4–mullite coating prepared by hydrothermal electrophoretic deposition for SiCC/C composites , 2013 .

[30]  Xiaohong Shi,et al.  Mullite Oxidation Resistant Coating for SiC-coated Carbon/Carbon Composites by Supersonic Plasma Spraying , 2013 .

[31]  Lai-fei Cheng,et al.  Oxidation behaviour of two-dimensional C/SiC modified with self-healing Si–B–C coating in static air , 2012 .

[32]  Ting Yang,et al.  Microstructure and anti-oxidation property of mullite oxidation protective coating prepared by hydrothermal electrophoretic deposition for SiC–C/C composites , 2011 .

[33]  E. Opila,et al.  Oxidation of Carbon Fiber‐Reinforced Silicon Carbide Matrix Composites at Reduced Oxygen Partial Pressures , 2011 .

[34]  Lai-fei Cheng,et al.  Ablation Behavior of a Three-Dimensional Carbon/Silicon Carbide Composite Nozzle in an Ethanol/Oxygen Combustion Gas Generator , 2009 .

[35]  Li Kezhi,et al.  A SiC whisker-toughened SiC-CrSi2 oxidation protective coating for carbon/carbon composites , 2007 .

[36]  Xiaohong Shi,et al.  SiC whisker-toughened SiC oxidation protective coating for carbon/carbon composites , 2006 .

[37]  G. Borchardt,et al.  Mullite Coatings on SiC and C/C–Si–SiC Substrates Characterized by Infrared Spectroscopy , 2005 .

[38]  M. Ferraris,et al.  Cordierite–mullite coating for SiCf/SiC composites , 2002 .

[39]  Lai-fei Cheng,et al.  Effect of glass sealing on the oxidation behavior of three dimensional C/SiC composites in air , 2001 .

[40]  V. Sarin,et al.  The development of CVD mullite coatings for high temperature corrosive applications , 1997 .