Microscale Modeling of an Anode‐Supported Planar Solid Oxide Fuel Cell

A micro - scale model of a Solid Oxide Fuel Cell (SOFC) involving the mass transfer together with the electrochemical reaction, the transportation of electrons and ions through the respective spherical shaped electron conducting and ion conducting particles inside the electrodes was mathematically developed. Couples of useful parameters were introduced in order to represent the characteristics of the cell. The predicted cell performance was showed according to various operating and design conditions. The effects of micro scale electrode geometry on the cell performance were also taken into account. Parametric study according to the volumetric fraction of ionic and electronic conducting particles was conducted in order to examine the effects of operating conditions on the cell overpotentials. The study results substantiate the fact that SOFC overpotential could be effectively decreased by increasing the operating temperature as well as operating pressure. This present study reveals the working mechanisms of SOFC at the micro scale level, while demonstrating the use of micro scale relations to enhance the SOFC performance. The accuracy of the presented model was validated by comparing with already existing experimental results from the available literatures.

[1]  R. Krishna,et al.  The Maxwell-Stefan approach to mass transfer , 1997 .

[2]  Guilan Wang,et al.  Computational analysis of thermo-fluid and electrochemical characteristics of MOLB-type SOFC stacks , 2007 .

[3]  B. Steele,et al.  The development of intermediate-temperature solid oxide fuel cells for the next millennium , 1998 .

[4]  Young-Hag Koh,et al.  Design and fabrication of three-dimensional solid oxide fuel cells , 2006 .

[5]  J. Young,et al.  Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling , 2002 .

[6]  L. Gauckler,et al.  Thin films for micro solid oxide fuel cells , 2007 .

[7]  Yoshio Matsuzaki,et al.  Evaluation and modeling of performance of anode-supported solid oxide fuel cell , 2000 .

[8]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[9]  Dennis Y.C. Leung,et al.  Micro-scale modelling of solid oxide fuel cells with micro-structurally graded electrodes , 2007 .

[10]  V. Antonucci,et al.  Micro-modelling of solid oxide fuel cell electrodes , 1998 .

[11]  Jenn-Jiang Hwang,et al.  Detailed characteristic comparison between planar and MOLB-type SOFCs , 2005 .

[12]  Randall Gemmen,et al.  Validation and Application of a CFD-Based Model for Solid Oxide Fuel Cells and Stacks , 2003 .

[13]  J.P.P. Huijsmans,et al.  Intermediate temperature SOFC – a promise for the 21st century , 1998 .

[14]  Jenn-Jiang Hwang,et al.  Computational analysis of species transport and electrochemical characteristics of a MOLB-type SOFC , 2005 .

[15]  Andrew Murray,et al.  Cell cycle: A snip separates sisters , 1999, Nature.

[16]  Boming Yu,et al.  Geometrical Models for Tortuosity of Streamlines in Three-Dimensional Porous Media , 2008 .

[17]  Xiao-Dong Zhou,et al.  Application of vacuum deposition methods to solid oxide fuel cells , 2006 .

[18]  Shi Yang,et al.  Innovative design to improve the power density of a solid oxide fuel cell , 2006 .

[19]  Amos Gilat,et al.  Numerical Methods for Engineers and Scientists: An Introduction with Applications Using MATLAB , 2007 .

[20]  Yann Bultel,et al.  Theoretical optimisation of a SOFC composite cathode , 2005 .

[21]  P. Brault,et al.  Plasma Sputtering Deposition of PEMFC Porous Carbon Platinum Electrodes , 2008 .

[22]  Khiam Aik Khor,et al.  Simulation of a composite cathode in solid oxide fuel cells , 2004 .

[23]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[24]  I. Dincer,et al.  Mathematical modeling of planar solid oxide fuel cells , 2006 .

[25]  K. Kendall,et al.  High temperature solid oxide fuel cells : fundamentals, design and applicatons , 2003 .

[26]  B. Steele.  Materials for IT-SOFC stacks: 35 years R&D: the inevitability of gradualness? , 2000 .

[27]  M. Fowler,et al.  Performance comparison of Fick’s, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode , 2003 .

[28]  Khiam Aik Khor,et al.  Cathode Micromodel of Solid Oxide Fuel Cell , 2004 .

[29]  Werner Lehnert,et al.  Modelling of gas transport phenomena in SOFC anodes , 2000 .

[30]  高橋 武彦,et al.  Science and technology of ceramic fuel cells , 1995 .

[31]  S. Chan,et al.  Polarization effects in electrolyte/electrode-supported solid oxide fuel cells , 2002 .

[32]  Michael Krumpelt,et al.  Materials for lower temperature solid oxide fuel cells , 2001 .

[33]  Kohei Ito,et al.  Performance analysis of planar-type unit SOFC considering current and temperature distributions , 2000 .

[34]  S. Chan,et al.  Anode Micro Model of Solid Oxide Fuel Cell , 2001 .