Comparison of geometry-based and CT voxel-based finite element modelling and experimental validation.

The objectives of the paper presented here is the comparison of a geometry-based and voxel-based finite element (FE) method preprocessor of the human femur. The models were experimentally validated by strain gauge measurements (principal stress). The correlation coefficients (r) between the three methods (geometry-based FEM, voxel-based FEM, strain gauge measurements) were found to be in the range 0.91-0.94 (r2: 0.84-0.88). The relationships between the samples are highly significant (P = 0.001), where the strain gauge results are the independent variables. These results suggest that the validity with respect to the principal stress of a voxel-based modelling is similar to the validity of geometry-based modelling. In summary, therefore, we conclude that voxel-based meshing allows a straightforward interfacing with computerized tomography (CT) scans and might contribute to a clinically applicable FEM technology.

[1]  P Rüegsegger,et al.  Three-dimensional finite element modelling of non-invasively assessed trabecular bone structures. , 1995, Medical engineering & physics.

[2]  J H Keyak,et al.  Automated three-dimensional finite element modelling of bone: a new method. , 1990, Journal of biomedical engineering.

[3]  Docteur Paul G. J. Maquet,et al.  Biomechanics of the Knee , 1984, Springer Berlin Heidelberg.

[4]  H. Skinner,et al.  Three-dimensional finite element modelling of bone: effects of element size. , 1992, Journal of biomedical engineering.

[5]  N. Kikuchi,et al.  A homogenization sampling procedure for calculating trabecular bone effective stiffness and tissue level stress. , 1994, Journal of biomechanics.

[6]  Y Youm,et al.  Three dimensional shape reconstruction and finite element analysis of femur before and after the cementless type of total hip replacement. , 1993, Journal of biomedical engineering.

[7]  B S Myers,et al.  An improved method for finite element mesh generation of geometrically complex structures with application to the skullbase. , 1997, Journal of biomechanics.

[8]  S. Stover,et al.  Development and validation of a series of three-dimensional finite element models of the equine metacarpus. , 1997, Journal of biomechanics.

[9]  William E. Lorensen,et al.  Marching cubes: A high resolution 3D surface construction algorithm , 1987, SIGGRAPH.

[10]  R. Huiskes,et al.  A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models. , 1995, Journal of biomechanics.

[11]  S A Marom,et al.  Computer aided stress analysis of long bones utilizing computed tomography. , 1990, Journal of biomechanics.

[12]  C. D. Mote,et al.  Femoral prosthesis implantation induces changes in bone stress that depend on the extent of porous coating , 1994, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[13]  P K Basu,et al.  3-D femoral stress analysis using CT scans and p-version FEM. , 1985, Biomaterials, medical devices, and artificial organs.

[14]  L W Marks,et al.  The use of strain energy as a convergence criterion in the finite element modelling of bone and the effect of model geometry on stress convergence. , 1993, Journal of biomedical engineering.

[15]  J H Keyak,et al.  Validation of an automated method of three-dimensional finite element modelling of bone. , 1993, Journal of biomedical engineering.

[16]  R. Müller,et al.  Interfacing quantitative computed tomography with finite element modeling , 1990, ISPRS International Conference on Computer Vision and Remote Sensing.

[17]  L Cristofolini,et al.  A comparative study on different methods of automatic mesh generation of human femurs. , 1998, Medical engineering & physics.

[18]  P Rüegsegger,et al.  Automated finite element analysis of excised human femora based on precision -QCT. , 1996, Journal of biomechanical engineering.

[19]  R P Franke,et al.  Sensitivity of femoral strain pattern analyses to resultant and muscle forces at the hip joint. , 1996, Medical engineering & physics.