Multi-megawatt, gigajoule plasma operation in Tore Supra

Integrating several important technological elements required for long pulse operation in magnetic fusion devices, the Tore Supra tokamak routinely addresses the physics and technology issues related to this endeavor and, as a result, contributes essential information on critical issues for ITER. During the last experimental campaign, components of the radiofrequency system including an ITER relevant launcher (passive active multijunction (PAM)) and continuous wave/3.7 GHz klystrons, have been extensively qualified, and then used to develop steady state scenarios in which the lower hybrid (LH), ion cyclotron (IC) and electron cyclotron (EC) systems have been combined in fully stationary shots (duration similar to 150 s, injected power up to similar to 8MW, injected/extracted energy up to similar to 1 GJ). Injection of LH power in the 5.0-6.0MW range has extended the domain of accessible plasma parameters to higher densities and non-inductive currents. These discharges exhibit steady electron internal transport barriers (ITBs). We report here on various issues relevant to the steady state operation of future devices, ranging from operational aspects and limitations related to the achievement of long pulses in a fully actively cooled fusion device (e. g. overheating due to fast particle losses), to more fundamental plasma physics topics. The latter include a beneficial influence of IC resonance heating on the magnetohydrodynamic (MHD) stability in these discharges, which has been studied in detail. Another interesting observation is the appearance of oscillations of the central temperature with typical periods of the order of one to several seconds, caused by a nonlinear interplay between LH deposition, MHD activity and bootstrap current in the presence of an ITB.

[1]  A. Becoulet,et al.  Tore Supra steady-state power and particle injection: the ‘CIMES’ project , 2001 .

[2]  Gilles Berger-By,et al.  The ECRH/ECCD system on Tore Supra, a major step towards continuous operation , 2003 .

[3]  P. Maget,et al.  Neoclassical viscous stress tensor for non-linear MHD simulations with XTOR-2F , 2013 .

[4]  L. Colas,et al.  Calculation of heat fluxes induced by radio frequency heating on the actively cooled protections of ion cyclotron resonant heating (ICRH) and lower hybrid (LH) antennas in Tore Supra , 2013 .

[5]  X. Litaudon,et al.  Validation of the ITER-relevant passive-active-multijunction LHCD launcher on long pulses in Tore Supra , 2010 .

[6]  John L. Johnson,et al.  Resistive instabilities in general toroidal plasma configurations , 1975 .

[7]  E. Joffrin,et al.  Improved confinement in high li lower hybrid driven steady state plasmas in TORE SUPRA , 1994 .

[8]  F L Tabarés,et al.  Tritium inventory control during ITER operation under carbon plasma-facing components by nitrogen-based plasma chemistry: a review , 2013 .

[9]  X. Garbet,et al.  Linear stability of the tearing mode with two-fluid and curvature effects in tokamaks , 2012 .

[10]  R. Dumont.  Variational approach to radiofrequency waves in magnetic fusion devices , 2009 .

[11]  A. Becoulet,et al.  Efficiency and availability driven R&D issues for DEMO , 2009 .

[12]  V. S. Udintsev,et al.  First Results of Correlation Electron Cyclotron Emission on Tore Supra , 2006 .

[13]  B. Saoutic,et al.  Tore Supra: Toward Steady State in a Superconducting Tokamak , 2009 .

[14]  Curvature effect on tearing modes in presence of neoclassical friction , 2013 .

[15]  R. White,et al.  Influence of an energetic ion population on tokamak plasma stability , 1990 .

[16]  T. Tala,et al.  Controlling the internal transport barrier oscillations in high-performance tokamak plasmas with a dominant fraction of bootstrap current , 2007 .

[17]  J. P. Goedbloed,et al.  CASTOR: Normal-Mode Analysis of Resistive MHD Plasmas☆ , 1998 .

[18]  F. Saint-Laurent,et al.  Real time determination and control of the plasma localisation and internal inductance in Tore Supra , 2001 .

[19]  K. Tritz,et al.  Active stabilization of the resistive-wall mode in high-beta, low-rotation plasmas. , 2006, Physical review letters.

[20]  G. Agarici,et al.  Heat flux calculation and problem of flaking of boron carbide coatings on the Faraday screen of the ICRH antennas during Tore Supra high power, long pulse operation , 2011 .

[21]  X. Litaudon.  The Future of Tore Supra , 2009 .

[22]  F. Imbeaux,et al.  Giant oscillations of electron temperature during steady-state operation on Tore Supra. , 2006, Physical review letters.

[23]  A. Becoulet,et al.  Recent fully non-inductive operation results in Tore Supra with 6?min, 1?GJ plasma discharges , 2004 .

[24]  Pascal Garin,et al.  Actively cooled plasma facing components in Tore Supra , 2001 .

[25]  Hinrich Lütjens,et al.  XTOR-2F: A fully implicit Newton-Krylov solver applied to nonlinear 3D extended MHD in tokamaks , 2010, J. Comput. Phys..

[26]  F. Imbeaux,et al.  Studies of suprathermal electron loss in the magnetic ripple of Tore Supra , 2001 .

[27]  V. Basiuk,et al.  Ripple losses during ICRF heating in Tore Supra , 2004 .

[28]  F. Imbeaux,et al.  Temperature oscillating regimes in Tore Supra diagnosed by MHD activity , 2006 .

[29]  E. Joffrin,et al.  The CRONOS suite of codes for integrated tokamak modelling , 2010 .

[30]  C. Gil,et al.  EFIT Equilibrium Reconstruction Including Polarimetry Measurements on Tore Supra , 2011 .

[31]  Sylvain Brémond,et al.  Real-time control of the safety factor profile diagnosed by magneto-hydrodynamic activity on the Tore Supra tokamak , 2011 .

[32]  R. J. Dumont,et al.  Heating and current drive by ion cyclotron waves in the activated phase of ITER , 2012 .

[33]  Jay Kesner,et al.  Dipole equilibrium and stability , 2001 .

[34]  Bi-fluid and neoclassical effect on a Double-Tearing mode in Tore Supra , 2014 .

[35]  O. Naito,et al.  ITER L mode confinement database , 1997 .

[36]  Francesco Porcelli,et al.  Fast particle stabilisation , 1991 .

[37]  Comparative modelling of lower hybrid current drive with two launcher designs in the Tore Supra tokamak , 2013 .