The morphology of thermal cracks in brittle materials

The geometry of indentation cracks propagated by quenching has been studied as a function of the severity of the quench. Practical results are obtained for alumina, silicon carbide whisker reinforced alumina and high speed steel. On quenching the crack growth is higher in the surface direction compared to the depth direction and an algorithm is suggested for calculating the crack depth from the measured surface crack length. The fracture mode in alumina differs between the indentation and the quench part of the crack and it is suggested that the stress intensity at the crack tip is one important parameter that determines the fracture path. When the stress intensity is close to the fracture toughness of the material, the fracture path is predominately intergranular while the fracture path is transgranular for higher levels of stress intensity. In the case of reinforced alumina the fracture path is transgranular through the matrix independent of the stress intensity.

[1]  John R. Rice,et al.  Fracture of Brittle Solids (Cambridge Solid State Science Series) , 1975 .

[2]  M. Saâdaoui,et al.  Thermal fatigue of alumina: comparison with mechanical data and life time prediction , 1999 .

[3]  Brian R. Lawn,et al.  A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I , 1981 .

[4]  B. Lawn.  Fracture of Brittle Solids by Brian Lawn , 1993 .

[5]  Dong-joo Lee,et al.  R‐Curve Behavior and Strength for In‐Situ Reinforced Silicon Nitrides with Different Microstructures , 1992 .

[6]  R. Krause,et al.  Effect of Temperature on Toughness Curves in Alumina , 1995 .

[7]  Rw Rice,et al.  Ceramic Fracture Features, Observations, Mechanisms, and Uses , 1984 .

[8]  T. Andersson,et al.  Thermal cycling of indented ceramic materials , 1998 .

[9]  T. Andersson,et al.  Indentation Thermal Shock Test for Ceramics , 1996 .

[10]  R. Cook.  Segregation effects in the fracture of brittle materials: CaAl2O3 , 1990 .

[11]  Desiderio Kovar,et al.  Grain size distributions and strength variability of high-purity alumina , 1996 .

[12]  M. Collin,et al.  Analysis and prediction of thermal shock in brittle materials , 2000 .

[13]  D. Munz,et al.  Subcritical surface crack growth in borosilicate glass under thermal fatigue , 1991 .

[14]  Robert W. Cahn,et al.  Materials science and technology : a comprehensive treatment , 2000 .

[15]  Junichi Tatami,et al.  Stochastic analysis on crack path of polycrystalline ceramics based on the difference between the released energies in crack propagation , 1997 .

[16]  T. Lube.  Indentation crack profiles in silicon nitride , 2001 .

[17]  S. Suresh.  Fatigue of materials , 1991 .

[18]  K. Zeng,et al.  Identification of fracture sequences during sharp indentation of polycrystalline Al_2O_3 , 1994 .

[19]  E. Case,et al.  Cyclic thermal shock in SiC-whisker-reinforced alumina composite , 1989 .

[20]  B. Lawn,et al.  A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: II, Strength Method , 1981 .

[21]  A study of the velocity of indentation radial cracks in polycrystalline alumina , 1996 .

[22]  R. Cook,et al.  A Modified Indentation Toughness Technique , 1983 .

[23]  R. Krause.  Flat and rising R-curves for elliptical surface cracks from indentation and superposed flexure , 1994 .

[24]  R. Scattergood,et al.  Determination of Short‐Crack Toughness Curves , 1996 .

[25]  S. Ishihara,et al.  Crack propagation behavior of cermets and cemented carbides under repeated thermal shocks by the improved quench test , 1999 .

[26]  Chun-Hway Hsueh,et al.  Influence of Reinforcement Content and Diameter on the R‐Curve Response in SiC‐Whisker‐Reinforced Alumina , 1996 .

[27]  R. Ritchie.  Mechanisms of fatigue crack propagation in metals, ceramics and composites: Role of crack tip shielding☆ , 1988 .

[28]  M. Matthewson,et al.  Mechanical properties of ceramics , 1996 .

[29]  D. Shetty,et al.  Prediction of indentation-load dependence of fracture strengths from R-curves of toughened ceramics , 1993, Journal of Materials Science.

[30]  K. Zeng,et al.  Comparison of Slow Crack Growth Behavior in Alumina and SiC‐Whisker‐Reinforced Alumina , 1993 .

[31]  J. J. Mecholsky,et al.  Fractography of Ceramic and Metal Failures , 1984 .