Passive Gravity Balancing with a Self-Regulating Mechanism for Variable Payload

Gravity balancing techniques allow for the reduction of energy consumptions in robotic systems. With the appropriate arrangements, often including springs, the overall potential energy of a manipulator can be made configuration-independent, achieving an indifferent equilibrium for any position. On the other hand, such arrangements lose their effectiveness when some of the system parameters change, including the mass. This paper proposes a method to accommodate different payloads for a mechanism with a single degree-of-freedom (DOF). By means of an auxiliary mechanism including a slider, pulleys and a counterweight, the attachment point of a spring is automatically regulated so as to maintain the system in indifferent equilibrium regardless of the position, even when the overall mass of the system varies. Practical implications for the design of the mechanism are also discussed. Simulation results confirm the effectiveness of the proposed approach.

[1]  Just L. Herder,et al.  TWO SPATIAL GRAVITY EQUILIBRATORS , 2000 .

[2]  Just L. Herder,et al.  Force balancing of variable payload by active force-balanced reconfiguration of the mechanism , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[3]  Qi Lu,et al.  Concept Study of a Passive Reduced-Gravity Simulator for Training Astronauts , 2010 .

[4]  Chin-Hsing Kuo,et al.  Gravity compensation design of Delta parallel robots using gear-spring modules , 2020 .

[5]  Tariq Rahman,et al.  A simple technique to passively gravity-balance articulated mechanisms , 1995 .

[6]  Dar-Zen Chen,et al.  Design of planar variable-payload balanced articulated manipulators with actuated linear ground-adjacent adjustment , 2017 .

[7]  G. K. Ananthasuresh,et al.  Static balancing of Spring-loaded Planar Revolute-joint Linkages without Auxiliary Links , 2009 .

[8]  Basilio Lenzo.  Gravity balancing of a spatial serial 4-dof arm without auxiliary links using minimum number of springs , 2017 .

[9]  Vigen Arakelian,et al.  Linkage Design for Gravity Balancing by Means of Non-zero Length Springs , 2019 .

[10]  Giuseppe Radaelli,et al.  Design and optimization of a general planar zero free length spring , 2017 .

[11]  Sunil Kumar Agrawal,et al.  A gravity balancing leg orthosis for robotic rehabilitation , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[12]  Kristin L. Wood,et al.  Design of a Passive Self-Regulating Gravity Compensator for Variable Payloads , 2019 .

[13]  M. B. Widden,et al.  The spring-and-lever balancing mechanism, George Carwardine and the Anglepoise lamp , 2000 .

[14]  Sunil K. Agrawal,et al.  Design of gravity balancing leg orthosis using non-zero free length springs , 2005 .

[15]  Just L. Herder,et al.  Spring-to-Spring Balancing as Energy-Free Adjustment Method in Gravity Equilibrators , 2011 .

[16]  Sunil K. Agrawal,et al.  Gravity-balancing of spatial robotic manipulators , 2004 .

[17]  J.L. Herder,et al.  Energy-Free Adjustment of Gravity Equilibrators Using the Virtual Spring Concept , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.

[18]  Yonghwan Oh,et al.  One-Piece Gravity Compensation Mechanism Using Cam Mechanism and Compression Spring , 2018, International Journal of Precision Engineering and Manufacturing-Green Technology.

[19]  Antonio Frisoli,et al.  A new Constant Pushing Force Device for human walking analysis , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[20]  Chin-Hsing Kuo,et al.  A single-degree-of-freedom self-regulated gravity balancer for adjustable payload , 2017 .

[21]  Antonio Frisoli,et al.  Trackhold: A Novel Passive Arm-Support Device , 2016 .

[22]  Krishan Kumar Gotewal,et al.  A review on passive gravity compensation , 2017, 2017 International conference of Electronics, Communication and Aerospace Technology (ICECA).

[23]  Antonio Frisoli,et al.  New Gravity Balancing Technique and Hybrid Actuation for Spatial Serial Manipulators , 2014 .

[24]  Chin-Hsing Kuo,et al.  Gravity Compensation Design of Planar Articulated Robotic Arms Using the Gear-Spring Modules , 2020 .

[26]  Ching-Kong Chen,et al.  Conceptual Design of a Two-Stage Variable Gravity Compensated Mechanism , 2019 .

[27]  Gianluca Gatti,et al.  Gravity Compensation of Robotic Manipulators Using Non-linear Spring Configurations , 2020 .

[28]  Hideo Fujimoto,et al.  Design and Prototype of Variable Gravity Compensation Mechanism (VGCM) , 2011, J. Robotics Mechatronics.

[29]  J. Herder,et al.  Static Balancing of Four-Bar Compliant Mechanisms With Torsion Springs by Exerting Negative Stiffness Using Linear Spring At the Instant Center of Rotation , 2020 .

[30]  Yi,et al.  A Static Balancing Method for Variable Payloads by Combination of a Counterweight and Spring and Its Application as a Surgical Platform , 2019, Applied Sciences.