Extended numerical manifold method for engineering failure analysis

[1]  Kenjiro Terada,et al.  Finite cover method for linear and non‐linear analyses of heterogeneous solids , 2003 .

[2]  I. Babuska,et al.  The generalized finite element method , 2001 .

[3]  Hui-Ping Wang,et al.  A Lagrangian reproducing kernel particle method for metal forming analysis , 1998 .

[4]  Shucai Li,et al.  Enriched meshless manifold method for two-dimensional crack modeling , 2005 .

[5]  J. E. Akin,et al.  Development of a derivative singular element for application to crack propagation problems , 1989 .

[6]  Yumin Cheng,et al.  A COMPLEX VARIABLE MESHLESS MANIFOLD METHOD FOR FRACTURE PROBLEMS , 2010 .

[7]  Guowei Ma,et al.  THE NUMERICAL MANIFOLD METHOD: A REVIEW , 2010 .

[8]  Y. H. Wang,et al.  A general method for multiple crack problems in a finite plate , 1992 .

[9]  I. Babuska,et al.  Generalized finite element method using mesh-based handbooks: application to problems in domains with many voids , 2003 .

[10]  Kenjiro Terada,et al.  An integrated procedure for three‐dimensional structural analysis with the finite cover method , 2005 .

[11]  B. Karihaloo.  Fracture mechanics and structural concrete , 1995 .

[12]  Ted Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[13]  Ted Belytschko,et al.  Arbitrary discontinuities in finite elements , 2001 .

[14]  Wing Kam Liu,et al.  Numerical simulations of strain localization in inelastic solids using mesh‐free methods , 2000 .

[15]  Huang Yu-ying,et al.  Application of numerical manifold method in fluid-solid interaction harmonic analysis , 2007 .

[16]  C. Shih,et al.  Elastic-Plastic Analysis of Cracks on Bimaterial Interfaces: Part I—Small Scale Yielding , 1988 .

[17]  Paul A. Wawrzynek,et al.  Quasi-automatic simulation of crack propagation for 2D LEFM problems , 1996 .

[18]  D. Owen,et al.  A combined finite‐discrete element method in transient dynamics of fracturing solids , 1995 .

[19]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[20]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[21]  Ted Belytschko,et al.  An extended finite element method for modeling crack growth with frictional contact , 2001 .

[22]  Paul W. Cleary,et al.  Large scale industrial DEM modelling , 2004 .

[23]  Dian-Qing Li,et al.  A three-dimensional numerical manifold method based on tetrahedral meshes , 2009 .

[24]  Yu-Min Lee,et al.  Mixed mode fracture propagation by manifold method , 2002 .

[25]  T. Belytschko,et al.  Extended finite element method for three-dimensional crack modelling , 2000 .

[26]  Ted Belytschko,et al.  A vector level set method and new discontinuity approximations for crack growth by EFG , 2002 .

[27]  Guangqi Chen,et al.  DEVELOPMENT OF HIGH-ORDER MANIFOLD METHOD , 1998 .

[28]  Kenjiro Terada,et al.  EULERIAN FINITE COVER METHOD FOR SOLID DYNAMICS , 2010 .

[29]  G. Stacey,et al.  New slope stability considerations for deep open pit mines , 2003 .

[30]  Ted Belytschko,et al.  Modeling fracture in Mindlin–Reissner plates with the extended finite element method , 2000 .

[31]  Guowei Ma,et al.  DEVELOPMENT OF NUMERICAL MANIFOLD METHOD AND ITS APPLICATION IN ROCK ENGINEERING , 2009 .

[32]  Jc Li,et al.  Wave Propagation and Attenuation Through Filled Rock Joints , 2008 .

[33]  John Coggan,et al.  Developments in the characterization of complex rock slope deformation and failure using numerical modelling techniques , 2006 .

[34]  R. A. Uras,et al.  Generalized multiple scale reproducing kernel particle methods , 1996 .

[35]  Mark A Fleming,et al.  ENRICHED ELEMENT-FREE GALERKIN METHODS FOR CRACK TIP FIELDS , 1997 .

[36]  Howard L. Schreyer,et al.  Axisymmetric form of the material point method with applications to upsetting and Taylor impact problems , 1996 .

[37]  T. Belytschko,et al.  MODELING HOLES AND INCLUSIONS BY LEVEL SETS IN THE EXTENDED FINITE-ELEMENT METHOD , 2001 .

[38]  Yoichi Sumi,et al.  Morphological aspects of fatigue crack propagation Part I—Computational procedure , 1996 .

[39]  D. Owen,et al.  Discrete fracture in quasi-brittle materials under compressive and tensile stress states , 2004 .

[40]  De Renobales,et al.  Strata Buckling In Footwall Slopes In Coal Mining , 1987 .

[41]  Jeen-Shang Lin,et al.  A mesh-based partition of unity method for discontinuity modeling , 2003 .

[42]  Bernard Amadei,et al.  Extensions of discontinuous deformation analysis for jointed rock masses , 1996 .

[43]  T. Belytschko,et al.  Arbitrary branched and intersecting cracks with the eXtended Finite Element Method , 2000 .

[44]  Eli Turkel,et al.  Multiple crack weight for solution of multiple interacting cracks by meshless numerical methods , 2006 .

[45]  Pierre-Olivier Bouchard,et al.  Crack propagation modelling using an advanced remeshing technique , 2000 .

[46]  W. Z. Savage,et al.  Gravitational spreading of steep-sided ridges (“sackung”) in Western United States , 1976 .

[47]  Kenjiro Terada,et al.  Finite cover method with mortar elements for elastoplasticity problems , 2005 .

[48]  Kenjiro Terada,et al.  Performance assessment of generalized elements in the finite cover method , 2004 .

[49]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[50]  Guowei Ma,et al.  Numerical analysis of 2-D crack propagation problems using the numerical manifold method , 2010 .

[51]  Guowei Ma,et al.  Simulation of Rock Slope Failures With the Numerical Manifold Method , 2010 .

[52]  E. C. Kalkani,et al.  Finite Element Analysis of Toppling Failure at Hell's Gate Bluffs, British Columbia , 1976 .

[53]  Y. Chiou,et al.  CRACK GROWTH PREDICTION BY MANIFOLD METHOD , 1999 .

[54]  Guowei Ma,et al.  Analytical study of dynamic friction mechanism in blocky rock systems , 2009 .

[55]  Doug Stead,et al.  Analysis of the distributions of stress in natural ridge forms: implications for the deformation mechanisms of rock slopes and the formation of sackung , 2005 .

[56]  Gen-Hua Shi,et al.  Manifold Method of Material Analysis , 1992 .

[57]  Jamshid Ghaboussi,et al.  Finite element for rock joints and interfaces , 1973 .

[58]  Norio Hasebe,et al.  New integration scheme for the branch crack problem , 1995 .

[59]  P. Hansbo,et al.  A finite element method for the simulation of strong and weak discontinuities in solid mechanics , 2004 .

[60]  Wing Kam Liu,et al.  Reproducing kernel particle methods , 1995 .

[61]  P. Steinmann,et al.  A finite element method for the computational modelling of cohesive cracks , 2005 .

[62]  T. Belytschko,et al.  Extended finite element method for cohesive crack growth , 2002 .

[63]  T. Belytschko,et al.  THE NATURAL ELEMENT METHOD IN SOLID MECHANICS , 1998 .

[64]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[65]  P. Cundall.  A computer model for simulating progressive, large-scale movements in blocky rock systems , 1971 .

[66]  Gerhard A. Holzapfel,et al.  Modeling 3D crack propagation in unreinforced concrete using PUFEM , 2005 .

[67]  Richard E. Goodman,et al.  CLOSURE ON A MODEL FOR THE MECHANICS OF JOINTED ROCK , 1968 .

[68]  T. Liszka,et al.  hp-Meshless cloud method , 1996 .

[69]  Kevin Dugan,et al.  Analysis Of Flexural Toppling At Australian Bulk Minerals Savage River Mine , 2000 .

[70]  John Coggan,et al.  Numerical modelling of slope behaviour of Delabole slate quarry (Cornwall, UK) , 1999 .

[71]  B. Nayroles,et al.  Generalizing the finite element method: Diffuse approximation and diffuse elements , 1992 .

[72]  Ivo Babuška,et al.  Approximation with harmonic and generalized harmonic polynomials in the partition of unity method , 1997 .

[73]  Hongwu Zhang,et al.  Numerical manifold method for dynamic nonlinear analysis of saturated porous media , 2006 .

[74]  K. Terzaghi,et al.  Stability of Steep Slopes on Hard Unweathered Rock , 1962 .

[75]  Takashi Kyoya,et al.  Finite cover method for progressive failure with cohesive zone fracture in heterogeneous solids and structures , 2006 .

[76]  D. Chopp,et al.  Extended finite element method and fast marching method for three-dimensional fatigue crack propagation , 2003 .

[77]  Yihe Zhang,et al.  Wilson non‐conforming element in numerical manifold method , 2002 .

[78]  Mark A Fleming,et al.  Meshless methods: An overview and recent developments , 1996 .

[79]  C. Tang,et al.  Numerical simulation of progressive rock failure and associated seismicity , 1997 .

[80]  Roger D. Hart,et al.  An Introduction to Distinct Element Modeling for Rock Engineering , 1993 .

[81]  P. Bouchard,et al.  Numerical modelling of crack propagation: automatic remeshing and comparison of different criteria , 2003 .

[82]  E. Oñate,et al.  A stabilized finite point method for analysis of fluid mechanics problems , 1996 .

[83]  D. Stead,et al.  Asperity Degradation and Damage in the Direct Shear Test: A Hybrid FEM/DEM Approach , 2008 .

[84]  Gen-Hua Shi,et al.  Modeling rock joints and blocks by manifold method , 1992 .

[85]  Li,et al.  Moving least-square reproducing kernel methods (I) Methodology and convergence , 1997 .

[86]  Tomofumi Koyama,et al.  DEVELOPMENT OF COUPLED DISCONTINUOUS DEFORMATION ANALYSIS AND NUMERICAL MANIFOLD METHOD (NMM–DDA) , 2010 .

[87]  E. T. Brown,et al.  Rock Mechanics: For Underground Mining , 1985 .

[88]  Wing Kam Liu,et al.  Reproducing Kernel Particle Methods for large deformation analysis of non-linear structures , 1996 .

[89]  T. Belytschko,et al.  Element‐free Galerkin methods , 1994 .

[90]  K. Bathe,et al.  The method of finite spheres , 2000 .

[91]  Joseph J Monaghan,et al.  An introduction to SPH , 1987 .

[92]  I. Babuska,et al.  Special finite element methods for a class of second order elliptic problems with rough coefficients , 1994 .

[93]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[94]  T. Strouboulis,et al.  The generalized finite element method: an example of its implementation and illustration of its performance , 2000 .

[95]  O. C. Zienkiewicz,et al.  A new cloud-based hp finite element method , 1998 .

[96]  Carlos Armando Duarte,et al.  A high‐order generalized FEM for through‐the‐thickness branched cracks , 2007 .

[97]  L. Libersky,et al.  Smoothed Particle Hydrodynamics: Some recent improvements and applications , 1996 .

[98]  T. Belytschko,et al.  The intrinsic XFEM: a method for arbitrary discontinuities without additional unknowns , 2006 .

[99]  Jonathan Richard Shewchuk,et al.  Adaptive Precision Floating-Point Arithmetic and Fast Robust Geometric Predicates , 1997, Discret. Comput. Geom..

[100]  J. Prévost,et al.  Modeling quasi-static crack growth with the extended finite element method Part I: Computer implementation , 2003 .

[101]  Guowei Ma,et al.  A NUMERICAL MANIFOLD METHOD FOR PLANE MICROPOLAR ELASTICITY , 2010 .

[102]  Carlos Armando Duarte,et al.  A Generalized Finite Element Method for polycrystals with discontinuous grain boundaries , 2006 .

[103]  Dwayne D. Tannant,et al.  Numerical analysis of the stability of heavily jointed rock slopes using PFC2D , 2003 .

[104]  Guowei Ma,et al.  Modelling rock fracturing and blast-induced rock mass failure via advanced discretisation within the discontinuous deformation analysis framework , 2011 .

[105]  L. J. Sluys,et al.  A new method for modelling cohesive cracks using finite elements , 2001 .

[106]  Oden,et al.  An h-p adaptive method using clouds , 1996 .

[107]  P. C. Paris,et al.  Stress Analysis of Cracks , 1965 .

[108]  Guowei Ma,et al.  Numerical simulation of blasting-induced rock fractures , 2008 .

[109]  Yu-Fei Wu,et al.  Numerical manifold method based on the method of weighted residuals , 2005 .

[110]  I. Babuska,et al.  The Partition of Unity Method , 1997 .

[111]  T. K. Hellen.  On the method of virtual crack extensions , 1975 .

[112]  Y. H. Zhang,et al.  Formulation of a Three-dimensional Numerical Manifold Method with Tetrahedron and Hexahedron Elements , 2008 .

[113]  M. Rashid.  The arbitrary local mesh replacement method: An alternative to remeshing for crack propagation analysis , 1998 .

[114]  R. Nuismer.  An energy release rate criterion for mixed mode fracture , 1975 .

[115]  E. Oñate,et al.  A hierarchical finite element method based on the partition of unity , 1998 .

[116]  Kenjiro Terada,et al.  Eulerian finite cover method for quasi‐static equilibrium problems of hyperelastic bodies , 2006 .

[117]  G. Ma,et al.  Development of 3-D Numerical Manifold Method , 2009 .

[118]  M. Xie,et al.  Energy-based automatic mixed-mode crack-propagation modeling , 1995 .

[119]  I. Babuska,et al.  The design and analysis of the Generalized Finite Element Method , 2000 .

[120]  Gregory B. Baecher,et al.  The effect of discontinuity persistence on rock slope stability , 1983 .

[121]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[122]  Shuodao Wang,et al.  A Mixed-Mode Crack Analysis of Isotropic Solids Using Conservation Laws of Elasticity , 1980 .

[123]  I. Babuska,et al.  The partition of unity finite element method: Basic theory and applications , 1996 .

[124]  Nicholas Sitar,et al.  Kinematics and Discontinuous Deformation Analysis of Landslide Movement , 1997 .

[125]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[126]  S. Martino,et al.  Influence of man-made cuts on the stability of pyroclastic covers (Campania, southern Italy): a numerical modelling approach , 2003 .

[127]  R. Barsoum.  Triangular quarter‐point elements as elastic and perfectly‐plastic crack tip elements , 1977 .

[128]  Guowei Ma,et al.  A comparison between the NMM and the XFEM in discontinuity modeling , 2012 .

[129]  Guowei Ma,et al.  Numerical modeling of footwall slopes in surface coal mining with the NMM , 2010 .

[130]  Ivo Babuška,et al.  Generalized finite element methods for three-dimensional structural mechanics problems , 2000 .

[131]  F. Patton.  Multiple Modes of Shear Failure In Rock , 1966 .

[132]  Mao Kurumatani,et al.  Finite cover method with multi‐cover layers for the analysis of evolving discontinuities in heterogeneous media , 2009 .

[133]  Michael G. Katona,et al.  A simple contact–friction interface element with applications to buried culverts , 1983 .

[134]  Jc Li,et al.  Vibrating Screen Modelling with the Numerical Manifold Method , 2008 .

[135]  René de Borst,et al.  Discrete vs smeared crack models for concrete fracture: bridging the gap , 2004 .

[136]  Doug Stead,et al.  Realistic simulation of rock slope failure mechanisms: the need to incorporate principles of fracture mechanics , 2004 .

[137]  Oldrich Hungr,et al.  Large-scale brittle and ductile toppling of rock slopes , 2002 .

[138]  Guoxin Zhang,et al.  SIMULATION OF TOPPLING FAILURE OF ROCK SLOPE BY NUMERICAL MANIFOLD METHOD , 2010 .

[139]  E. Eberhardt,et al.  Developments in the analysis of footwall slopes in surface coal mining , 1997 .

[140]  O. Zienkiewicz,et al.  ANALYSIS OF NONLINEAR PROBLEMS IN ROCK MECHANICS WITH PARTICULAR REFERENCE TO JOINTED ROCK SYSTEMS , 1970 .

[141]  Jean-Herve Prevost,et al.  MODELING QUASI-STATIC CRACK GROWTH WITH THE EXTENDED FINITE ELEMENT METHOD PART II: NUMERICAL APPLICATIONS , 2003 .

[142]  Lanru Jing,et al.  A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering , 2003 .

[143]  Guowei Ma,et al.  Modeling complex crack problems using the numerical manifold method , 2009 .

[144]  J. Oden,et al.  H‐p clouds—an h‐p meshless method , 1996 .

[145]  Ted Belytschko,et al.  Discontinuous enrichment in finite elements with a partition of unity method , 2000 .

[146]  T. Liszka,et al.  A generalized finite element method for the simulation of three-dimensional dynamic crack propagation , 2001 .

[147]  Robert J. Asaro,et al.  Elastic-plastic analysis of cracks on bimaterial interfaces: interfaces with structure , 1993 .