Fabrication of through-silicon via arrays by photo-assisted electrochemical etching and supercritical electroplating

Abstract. This paper aims to fabricate high aspect ratio through silicon via (TSV) by photo-assisted electrochemical etching (PAECE) and supercritical CO2 copper electroplating. A blind-holed silicon array was first fabricated by PAECE. By studying the etching parameters, including hydrofluoric acid concentration, etchant temperature, stirring speed, tetrabutylammonium perchlorate (TBAP) content, and Ohmic contact thickness, an array of pores with a 1∶45 aspect ratio (height=250  μm and diameter=5.5  μm) was obtained successfully. Moreover, TBAP and Kodak Photo-Flo (PF) solution were added into the etchant to acquire smooth sidewalls for the first time. TBAP was added for the first time to serve as an antistatic agent in deionized water-based etchant to prevent side-branch etching, and PF was used to degasify hydrogen bubbles in the etchant. The effect of gold thickness over Ohmic contact was investigated. Randomized etching was observed with an Au thickness of 200 Å, but it can be improved by increasing the etching voltage. The silicon mold of through-holes was filled with metal using supercritical CO2 copper electroplating, which features high diffusivity, permeability, and density. The TSV structure (aspect ratio=1∶35) was obtained at a supercritical pressure of 2000 psi, temperature of 50°C, and current density of 30  mA/cm2 in 2.5 h.

[1]  S. Miyata,et al.  Electroplating of Nanostructured Nickel in Emulsion of Supercritical Carbon Dioxide in Electrolyte Solution , 2002 .

[2]  C. Ishiyama,et al.  Effects of pressure on electroplating of copper using supercritical carbon dioxide emulsified electrolyte , 2013 .

[3]  A. Shibata,et al.  Crystal growth on novel Cu electroplating using suspension of supercritical CO2 in electrolyte with Cu particles , 2013 .

[4]  P. French,et al.  A novel electrochemical etching technique for n-type silicon , 2002 .

[5]  Jinmo Kim,et al.  High aspect ratio via etching conditions for deep trench of silicon , 2003 .

[6]  H. Chuang,et al.  An investigation of supercritical-CO2 copper electroplating parameters for application in TSV chips , 2014 .

[7]  C. Kim,et al.  Fabrication of Very-High-Aspect-Ratio Micro Metal Posts and Gratings by Photoelectrochemical Etching and Electroplating , 2011, Journal of Microelectromechanical Systems.

[8]  Michael J. Uren,et al.  An experimental and theoretical study of the formation and microstructure of porous silicon , 1985 .

[9]  H. Föll,et al.  Formation Mechanism and Properties of Electrochemically Etched Trenches in n‐Type Silicon , 1990 .

[10]  Chang-Jin Kim,et al.  Fabrication of High-Aspect-Ratio Electrode Arrays for Three-Dimensional Microbatteries , 2007, Journal of Microelectromechanical Systems.

[11]  A. Shibata,et al.  Filling of nanoscale holes with high aspect ratio by Cu electroplating using suspension of supercritical carbon dioxide in electrolyte with Cu particles , 2012 .

[12]  K. Chun,et al.  Photo-assisted electrochemical etching of a nano-gap trench with high aspect ratio for MEMS applications , 2006 .

[13]  S. Miyata,et al.  New electroplating method of nickel in emulsion of supercritical carbon dioxide and electroplating solution to enhance uniformity and hardness of plated film , 2004 .

[14]  A. Shibata,et al.  Cu electroplating using suspension of supercritical carbon dioxide in copper-sulfate-based electrolyte with Cu particles , 2013 .

[15]  S. D. Collins,et al.  Porous Silicon Formation and Electropolishing of Silicon by Anodic Polarization in HF Solution , 1989 .

[16]  W. Tsai,et al.  High aspect ratio micro-hole filling employing emulsified supercritical CO2 electrolytes , 2016 .

[17]  Tong-Yi Zhang,et al.  Fabrication of high aspect ratio through-wafer copper interconnects by reverse pulse electroplating , 2009 .

[18]  Zhao Zhigang,et al.  Photoelectrochemical etching of uniform macropore array on full 5-inch silicon wafers , 2010 .

[19]  H. Chuang,et al.  Fabrication of high aspect ratio copper nanowires using supercritical CO2 fluids electroplating technique in AAO template , 2016 .

[20]  H. Chuang,et al.  Fabrication of through-silicon vias by supercritical CO2 emulsion-enabled nickel electroplating , 2014 .

[21]  Tatsuo Sato,et al.  Cu wiring into nano-scale holes by electrodeposition in supercritical carbon dioxide emulsified electrolyte with a continuous-flow reaction system , 2014 .