Multiphase PMSM and PMaSynRM Flux Map Model with Space Harmonics and Multiple Plane Cross Harmonic Saturation

Multiphase Synchronous Machines vary in rotor construction and winding distribution leading to non-sinusoidal inductances along the rotor periphery. Moreover, saturation and cross-saturation effects make the precise modeling a complex task. This paper proposes a general model of multi-phase magnet-excited synchronous machines considering multi-dimensional space modeling and revealing cross-harmonic saturation. The models can predict multiphase motor behavior in any transient state, including startup. They are based on flux maps obtained from static 2D Finite-Element (FE) analysis. FE validations have been performed to confirm authenticity of the dynamic models of multiphase PMaSynRMs. Very close to FE precision is guaranteed while computation time is incomparably lower.

[1]  Michel Hecquet,et al.  Multiphysics Modeling of a Permanent Magnet Synchronous Machine by Using Lumped Models , 2012, IEEE Transactions on Industrial Electronics.

[2]  Silverio Bolognani,et al.  Model Sensitivity of Fundamental-Frequency-Based Position Estimators for Sensorless PM and Reluctance Synchronous Motor Drives , 2018, IEEE Transactions on Industrial Electronics.

[3]  Pragasen Pillay,et al.  Modeling, simulation, and analysis of permanent-magnet motor drives. I. The permanent-magnet synchronous motor drive , 1989 .

[4]  M. Trlep,et al.  Evaluation of saturation and cross-magnetization effects in interior permanent magnet synchronous motor , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[5]  Seung-Ki Sul,et al.  Analysis of multiphase space vector pulse width modulation based on multiple d-q spaces concept , 2005, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..

[6]  Gianmario Pellegrino,et al.  Performance Comparison Between Surface-Mounted and Interior PM Motor Drives for Electric Vehicle Application , 2012, IEEE Transactions on Industrial Electronics.

[7]  Jiabin Wang,et al.  A High-Fidelity and Computationally Efficient Model for Interior Permanent-Magnet Machines Considering the Magnetic Saturation, Spatial Harmonics, and Iron Loss Effect , 2015, IEEE Transactions on Industrial Electronics.

[8]  H. Toliyat,et al.  Five-phase permanent-magnet motor drives , 2005, IEEE Transactions on Industry Applications.

[9]  Gorazd Štumberger,et al.  Magnetically nonlinear dynamic model of synchronous motor with permanent magnets , 2007 .

[10]  Silva Hiti,et al.  Identification of machine parameters of a synchronous motor , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[11]  Andrea Cavagnino,et al.  New Trends in Electrical Machines Technology—Part II , 2014, IEEE Transactions on Industrial Electronics.

[12]  Zedong Zheng,et al.  Enhancing Fault-Tolerant Ability of a Nine-Phase Induction Motor Drive System Using Fuzzy Logic Current Controllers , 2017, IEEE Transactions on Energy Conversion.

[13]  Luis Romeral,et al.  Sensorless control of five phase PMSM based on extended Kalman filter , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[14]  Hiroyuki Ohsaki,et al.  Nonlinear abc-Model for Electrical Machines Using N-D Lookup Tables , 2015, IEEE Transactions on Energy Conversion.

[15]  Guohai Liu,et al.  Asymmetrical SVPWM Fault-Tolerant Control of Five-Phase PM Brushless Motors , 2017, IEEE Transactions on Energy Conversion.

[16]  Gyu-Hong Kang,et al.  Improved parameter modeling of interior permanent magnet synchronous motor based on finite element analysis , 2000 .

[17]  Luis Romeral,et al.  Dynamic nonlinear reluctance network analysis of five phase outer rotor BLDC machine , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[18]  Andrea Cavagnino,et al.  New Trends in Electrical Machines Technology - Part I , 2014, IEEE Trans. Ind. Electron..

[19]  Emil Levi,et al.  Multiphase Electric Machines for Variable-Speed Applications , 2008, IEEE Transactions on Industrial Electronics.

[20]  P.T. Krein,et al.  3-D Magnetic Equivalent Circuit Framework for Modeling Electromechanical Devices , 2009, IEEE Transactions on Energy Conversion.

[21]  Jordi-Roger Riba,et al.  Computationally Efficient Design and Optimization Approach of PMa-SynRM in Frequent Operating Torque–Speed Range , 2018, IEEE Transactions on Energy Conversion.

[22]  Luis Romeral,et al.  Modeling of Surface-Mounted Permanent Magnet Synchronous Motors With Stator Winding Interturn Faults , 2011, IEEE Transactions on Industrial Electronics.

[23]  R. De Doncker,et al.  Modeling spatial harmonics and switching frequencies in PM synchronous machines and their electromagnetic forces , 2012, 2012 XXth International Conference on Electrical Machines.

[24]  Ming Cheng,et al.  Fault-Tolerant Sensorless Control of a Five-Phase FTFSCW-IPM Motor Based on a Wide-Speed Strong-Robustness Sliding Mode Observer , 2018, IEEE Transactions on Energy Conversion.