Effects of cut volute profile on squirrel cage fan performance and flow field

The flow pattern in the volute of a squirrel cage fan is complicated and non-axisymmetric. In this article, the original volute profile of a squirrel cage fan was cut to control and reshape this non-axisymmetric flow structure. An experimental study was conducted to investigate the effects of the cut volute profile on the fan aerodynamic and acoustic performance. The results showed that cutting the volute profile with a relative cut position of 90° and a secondary clearance of 0.02D2 could enhance the fan total pressure at the volume flow rate of 0.4QBEP by about 7% without affecting the noise level. High-precision steady computational fluid dynamics simulation was also carried out to reveal the flow mechanism of the performance improvement. The results indicated that cut volute profile caused an impeller-across flow structure in the vicinity of the second clearance and re-organized the circumference distribution of the impeller flow status. Both the impeller working capability and the overall flow losses of the cut fan increased compared to the original one but the increment of the former was greater. This explains why fan pressure improved under low-flow conditions.

[1]  M. G. Tobin,et al.  Flow in a Centrifugal Fan of the Squirrel Cage Type , 1989 .

[2]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[3]  多翼ファン低騒音化の研究 : 第2報,ファン翼間流れと圧力変動 , 1994 .

[4]  D T Qi,et al.  A New Approach to The Design of Fan Volute Profiles , 1996 .

[5]  A Study of Sirocco Fan with Eccentric Inlet Nozzle. , 1999 .

[6]  Rafael Ballesteros-Tajadura,et al.  Unsteady Flow Pattern Characteristics Downstream of a Forward-Curved Blades Centrifugal Fan , 2001 .

[7]  Study on the Performance of a Sirocco Fan (Flow Around the Runner Blade) , 2004 .

[8]  Experimental Analysis on Inflow of Multi-blade Fan by Means of Stereoscopic PIV , 2004 .

[9]  Wuqi Gong.  EXPERIMENT STUDY ON THE ELOCITY FIELD NEAR THE TONGUE OF A FORWARD CURVED MULTI-BLADES CENTRIFUGAL FAN , 2005 .

[10]  Rafael Ballesteros-Tajadura,et al.  Relationship between volute pressure fluctuation pattern and tonal noise generation in a squirrel-cage fan , 2009 .

[11]  Hidechito Hayashi,et al.  Flow Characteristics in Scroll Casing of Sirocco Fan , 2010 .

[12]  Javad Alinejad,et al.  Experimental and numerical analysis of eight different volutes with the same impeller in a squirrel-cage fan , 2011 .

[13]  Manoochehr Darvish,et al.  TOWARD THE CFD SIMULATION OF SIROCCO FANS: FROM SELECTING A TURBULENCE MODEL TO THE ROLE OF CELL SHAPES , 2012 .

[14]  Jin-Hyuk Kim,et al.  Parametric study on a forward-curved blades centrifugal fan with an impeller separated by an annular plate , 2013 .

[15]  Hidechito Hayashi,et al.  Influence of diffuser on aerodynamic noise of a forward curved fan , 2013 .

[16]  Datong Qi,et al.  Experimental and numerical study on the inlet nozzle of a small squirrel-cage fan , 2013 .

[17]  Christian Oliver Paschereit,et al.  Numerical and Experimental Study on the Tonal Noise Generation of a Radial Fan , 2015 .

[18]  Yang Xin,et al.  Design Method for the Volute Profile of a Squirrel Cage Fan With Space Limitation , 2016 .