Microstructure, mechanical property and corrosion resistance of FeCoCrNi-M high-entropy alloy coatings on 6061 aluminum alloy prepared by laser cladding

[1]  P. Liaw,et al.  Effects of Transient Thermal Shock on the Microstructures and Corrosion Properties of a Reduced Activation High-Entropy Alloy , 2022, Journal of Alloys and Compounds.

[2]  Shenmin Zhang,et al.  Laser surface alloying of FeCoCrAlNiTi high entropy alloy composite coatings reinforced with TiC on 304 stainless steel to enhance wear behavior , 2022, Ceramics International.

[3]  W. Wang,et al.  A Co-free Cr-Fe-Ni-Al-Si high entropy alloy with outstanding corrosion resistance and high hardness fabricated by laser surface melting , 2022, Materials Letters.

[4]  M. Malekan,et al.  Soft Magnetic High Entropy FeCoNiCuMn Alloy with Excellent Ductility and High Electrical Resistance , 2022, Metals and Materials International.

[5]  X.H. Wang,et al.  Microstructure and properties of ceramic particle reinforced FeCoNiCrMnTi high entropy alloy laser cladding coating , 2022, Intermetallics.

[6]  Ş. Şen,et al.  In-situ TiB2 and Fe2Ti intermetallic assisted hard coatings by Fe-Ti-B based hardfacing electrodes , 2022, Journal of Alloys and Compounds.

[7]  Y. Ai,et al.  Preparation and microstructure and properties of AlCuFeMnTiV lightweight high entropy alloy , 2021, Journal of Alloys and Compounds.

[8]  G. Wang,et al.  Corrosion and friction resistance of TiVCrZrWNx high entropy ceramics coatings prepared by magnetron sputtering , 2021, Ceramics International.

[9]  Ashutosh Sharma,et al.  Phase separation and mechanical behavior of AlCoCrFeNi-X (X = Cu, Mn, Ti) high entropy alloys processed via powder metallurgy , 2021, Intermetallics.

[10]  Fei-fan Wang,et al.  Microstructure and corrosion properties of laser remelted CrFeCoNi and CrMnFeCoNi high entropy alloys coatings , 2021, Journal of Materials Research and Technology.

[11]  C. Liang,et al.  Effects of Al-based alloy powders on the mechanical behavior, corrosion resistance and infrared emissivity of polyurethane composite coatings , 2021 .

[12]  E. Trofimov,et al.  In Situ Medium Entropy Intermetallic Reinforced Composite Coating Fabricated by Additive Manufacturing , 2021, Metals.

[13]  J. Mirza-Rosca,et al.  Comparative EIS Study of AlxCoCrFeNi Alloys in Ringer’s Solution for Medical Instruments , 2021, Metals.

[14]  R. Sun,et al.  Research and progress of laser cladding on engineering alloys: A review , 2021 .

[15]  B. Han,et al.  Investigation on solid particles erosion resistance of laser cladded CoCrFeNiTi high entropy alloy coating , 2021 .

[16]  C. Paul,et al.  Parametric investigation and optimization for CO2 laser cladding of AlFeCoCrNiCu powder on AISI 316 , 2021, High Temperature Materials and Processes.

[17]  X. Liao,et al.  Effects of elemental segregation on microstructural evolution and local mechanical properties in a dynamically deformed CrMnFeCoNi high entropy alloy , 2021 .

[18]  Hua Yan,et al.  Microstructure and properties of Ni-based self-lubrication coatings by laser cladding/friction stir processing , 2020 .

[19]  Xiaojie Du,et al.  Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing , 2020 .

[20]  M. Jaafar,et al.  Investigation of surface and mechanical properties of Anodic Aluminium Oxide (AAO) developed on Al substrate for an electronic package enclosure , 2020 .

[21]  S. Babu,et al.  Effect of cyclic rapid thermal loadings on the microstructural evolution of a CrMnFeCoNi high-entropy alloy manufactured by selective laser melting , 2020 .

[22]  T. Hu,et al.  Effects of Mn Content on Mechanical Properties of FeCoCrNiMnx (0 ≤ x ≤ 0.3) High-Entropy Alloys: A First-Principles Study , 2020, Acta Metallurgica Sinica (English Letters).

[23]  Tao Zhang,et al.  A novel ultrafine-grained high entropy alloy with excellent combination of mechanical and soft magnetic properties , 2020 .

[24]  J. I. Juaristi,et al.  Structure and properties of CoCrFeNiX multi-principal element alloys from ab initio calculations , 2020, Journal of Applied Physics.

[25]  Yan Shi,et al.  Microstructure, mechanical, and corrosion resistance properties of Al0.8CrFeCoNiCux high-entropy alloy coatings on aluminum by laser cladding , 2020, Materials Research Express.

[26]  Wei-min Liu,et al.  Effects of Ti and Cu on the Microstructure Evolution of AlCoCrFeNi High-Entropy Alloy During Heat Treatment , 2020, Acta Metallurgica Sinica (English Letters).

[27]  Hao Liu,et al.  Microstructure and Properties of AlCoCrFeNiSi High-Entropy Alloy Coating on AISI 304 Stainless Steel by Laser Cladding , 2020, Journal of Materials Engineering and Performance.

[28]  P. Jablonski,et al.  The influence of incorporation of Mn on the pitting corrosion performance of CrFeCoNi High Entropy Alloy at different temperatures , 2019 .

[29]  D. Kong,et al.  Microstructure and corrosion behaviours of composite coatings on S355 offshore steel prepared by laser cladding combined with micro-arc oxidation , 2019 .

[30]  M. Barnett,et al.  The scratch behaviour of AlXCoCrFeNi (x=0.3 and 1.0) high entropy alloys , 2019, Wear.

[31]  Shijian Zheng,et al.  Oxide MnCr2O4 induced pitting corrosion in high entropy alloy CrMnFeCoNi , 2019, Materialia.

[32]  C. Paul,et al.  A study of metallurgy and erosion in laser surface alloying of AlxCu0.5FeNiTi high entropy alloy , 2019, Surface and Coatings Technology.

[33]  D. Choudhuri,et al.  Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds , 2019, Acta Materialia.

[34]  Chenyang Lu,et al.  A promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy , 2019, Journal of Materials Science & Technology.

[35]  P. Kannan,et al.  Evaluation of chromotrope FB dye as corrosion inhibitor using electrochemical and theoretical studies for acid cleaning process of petroleum pipeline , 2018, Surfaces and Interfaces.

[36]  Jia Liu,et al.  Characterization of Al0.5FeCu0.7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding , 2018, Optics & Laser Technology.

[37]  Dierk Raabe,et al.  Combinatorial metallurgical synthesis and processing of high-entropy alloys , 2018, Journal of Materials Research.

[38]  Martin Löbel,et al.  Influence of Titanium on Microstructure, Phase Formation and Wear Behaviour of AlCoCrFeNiTix High-Entropy Alloy , 2018, Entropy.

[39]  Dierk Raabe,et al.  Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution , 2018 .

[40]  Yan Shi,et al.  Microstructure and properties of laser clad high-entropy alloy coating on aluminium , 2018 .

[41]  P. Bai,et al.  Microstructure and properties of Ti/TiBCN coating on 7075 aluminum alloy by laser cladding , 2018 .

[42]  J. González-Rodríguez,et al.  Corrosion behaviour of Ti–Ni–Al alloys in a simulated human body solution , 2017, Journal of Materials Research and Technology.

[43]  D. Odabaş.  Effects of Load and Speed on Wear Rate of Abrasive Wear for 2014 Al Alloy , 2018 .

[44]  J. Rams,et al.  Effect of alloy elements added on microstructure and hardening of Al/SiC laser clad coatings , 2017 .

[45]  A. Filippov,et al.  Adhesion transfer in sliding a steel ball against an aluminum alloy , 2017 .

[46]  T. Shun,et al.  Microstructures and properties of Al0.3CoCrFeNiMnx high-entropy alloys , 2017 .

[47]  Branislav Hadzima,et al.  Shot peening as a pre-treatment to anodic oxidation coating process of AW 6082 aluminum for fatigue life improvement , 2017 .

[48]  M. Taheri,et al.  Thermal desorption spectroscopy of high fluence irradiated ultrafine and nanocrystalline tungsten: helium trapping and desorption correlated with morphology , 2017 .

[49]  D. Miracle,et al.  A critical review of high entropy alloys and related concepts , 2016 .

[50]  Shujie Pang,et al.  Vacuum brazing of Ti3Al-based alloy to TiAl using TiZrCuNi(Co) fillers , 2015 .

[51]  Y. Champion,et al.  Insights into the phase diagram of the CrMnFeCoNi high entropy alloy , 2015 .

[52]  Narendra B. Dahotre,et al.  Laser additive synthesis of high entropy alloy coating on aluminum: Corrosion behavior , 2015 .

[53]  H. Hammache,et al.  Tetraphosphonic acid as eco-friendly corrosion inhibitor on carbon steel in 3 % NaCl aqueous solution , 2015, Ionics.

[54]  Xiaolong Wang,et al.  Tribological properties of laser cladding TiB2 particles reinforced Ni-base alloy composite coatings on aluminum alloy , 2015, Rare Metals.

[55]  Akanksha Dwivedi,et al.  A geometrical parameter for the formation of disordered solid solutions in multi-component alloys , 2014 .

[56]  Yiping Lu,et al.  Effects of electro-negativity on the stability of topologically close-packed phase in high entropy alloys , 2014 .

[57]  Xing-wu Qiu,et al.  Effect of Ti content on structure and properties of Al2CrFeNiCoCuTix high-entropy alloy coatings , 2014 .

[58]  Hong Ye,et al.  Laser Cladding Fe-Al Intermetallics Coatings on ZL114A Aluminum Alloy , 2012 .

[59]  T. Shun,et al.  Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys , 2012 .

[60]  C. Liu,et al.  Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase , 2011 .

[61]  Z. Yin,et al.  Investigation of quench sensitivity and transformation kinetics during isothermal treatment in 6082 aluminum alloy , 2011 .

[62]  Wei Liu,et al.  Finite Element Analysis of Multi-step Sheet Metal Forming Based on Ideal Forming Theory , 2011 .

[63]  Yang Wang,et al.  Annealing on the structure and properties evolution of the CoCrFeNiCuAl high-entropy alloy , 2010 .

[64]  R. C. Picu,et al.  Influence of aging treatment on mechanical properties of 6061 aluminum alloy , 2010 .

[65]  Zhang Hai-yong.  Effect of Surface Mechanical Treatment on Surface Morphology and Tensile Properties of 5083 Aluminum Alloy , 2010 .

[66]  Xuelin Zhang,et al.  Effects of scan rate on the potentiodynamic polarization curve obtained to determine the Tafel slopes and corrosion current density , 2009 .

[67]  J. Yeh.  Recent progress in high-entropy alloys , 2006 .

[68]  Jien-Wei Yeh,et al.  Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering , 2004 .

[69]  C. Huang,et al.  Investigation on the corrosion behavior of Ti–6Al–4V implant alloy by electrochemical techniques , 2004 .

[70]  J. Yeh,et al.  Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition , 2004 .

[71]  J. Mazumder,et al.  Laser surface alloying of aluminum 319 alloy with iron , 2001 .

[72]  K. Shibata,et al.  Processing, microstructure, and properties of laser-clad Ni alloy FP-5 on Al alloy AA333 , 1994 .

[73]  M. Sluyters-Rehbach,et al.  The analysis of electrode impedances complicated by the presence of a constant phase element , 1984 .