Phase change material's (PCM) impacts on the energy performance and thermal comfort of buildings in a mild climate

Abstract The current residential buildings are of light weight construction. As such, they tend to frequent indoor air temperatures fluctuations and have been proven detrimental for thermal comfort and mechanical system energy consumption. This is reflected in the energy consumption statistics for residential buildings. More than 62% of the building energy use is towards maintaining comfortable indoor conditions. Phase change materials (PCM); a latent heat thermal storage material, have the potential to increase the thermal mass of these buildings without drastically affecting the current construction techniques. In this paper, the potential of phase change materials is investigated through numerical and experimental studies. The field experimental study is conducted using twin side-by-side buildings exposed to the same interior and exterior boundary conditions, and EnergyPlus, after being benchmarked with the experimental results, is used for the numerical study. The numerical study is carried out for an existing residential apartment unit with particular emphasis on the effects of different design parameters such as orientation and window to wall ratio. Preliminary analyses of experimental data show that phase change materials are effective in stabilizing the indoor air by reversing the heat flow direction. In fact, the indoor air and wall temperature fluctuations are reduced by 1.4 °C and 2.7 °C respectively. Following, benchmarking of the numerical simulation shows confidence levels in predicting the interior conditions since discrepancies between experimental data and numerical data are within tolerance limits of the measuring device. Further, from the analysis of the numerical data, phase change material is effective in moderating the operative temperature but does not translate to significant thermal comfort improvement when evaluated over a night time occupancy regime in the summer. On the contrary, PCM is effective in lowering the heating energy demand by up to 57% during the winter condition.

[1]  Mihai Cruceru,et al.  Novel concept of composite phase change material wall system for year-round thermal energy savings , 2010 .

[2]  Manuela Guedes de Almeida,et al.  Using PCM to improve building's thermal performance , 2013 .

[3]  Feng Xing,et al.  Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels , 2014 .

[4]  Mario A. Medina,et al.  Development of a thermally enhanced frame wall with phase‐change materials for on‐peak air conditioning demand reduction and energy savings in residential buildings , 2005 .

[5]  Joseph Virgone,et al.  In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard , 2011 .

[6]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[7]  Standard Ashrae.  Thermal Environmental Conditions for Human Occupancy , 1992 .

[8]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[9]  Cai Zhe,et al.  Experimental research on the use of phase change materials in perforated brick rooms for cooling storage , 2013 .

[10]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[11]  Jonathan Dewsbury,et al.  Dynamic thermal simulation of a PCM lined building with Energy Plus , 2012 .

[12]  Luisa F. Cabeza,et al.  Economic impact of integrating PCM as passive system in buildings using Fanger comfort model , 2016 .

[13]  Victor M. Ferreira,et al.  Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution , 2012 .

[14]  Esam M. Alawadhi,et al.  Building roof with conical holes containing PCM to reduce the cooling load: Numerical study , 2011 .

[15]  Joseph Virgone,et al.  Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation , 2008 .

[16]  Mohamed Khayet,et al.  Experimental tile with phase change materials (PCM) for building use , 2011 .

[17]  Xin Wang,et al.  An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating , 2007 .

[18]  Nirmal-Kumar C. Nair,et al.  Impact of Energy Storage in Buildings on Electricity Demand Side Management , 2011, Thermal Energy Storage with Phase Change Materials.

[19]  Noureddine Settou,et al.  Contribution on Buildings Design with Low Consumption of Energy Incorporated PCMs , 2014 .

[20]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[21]  Luisa F. Cabeza,et al.  Thermal loads inside buildings with phase change materials: Experimental results , 2012 .

[22]  Anna Laura Pisello,et al.  Dynamic thermal-energy performance analysis of a prototype building with integrated phase change materials , 2015 .

[23]  Yongping Yang,et al.  Energy performance of a hybrid space-cooling system in an office building using SSPCM thermal storage and night ventilation , 2011 .

[24]  Oliver Kornadt,et al.  Temperature reduction due to the application of phase change materials , 2008 .

[25]  Francesco Fiorito.  Phase-change materials for indoor comfort improvement in lightweight buildings. A parametric analysis for Australian climates , 2014 .

[26]  A.L.S. Chan,et al.  Energy and environmental performance of building façades integrated with phase change material in subtropical Hong Kong , 2011 .

[27]  Luigi Marletta,et al.  A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings , 2013 .

[28]  Yongsheng Lian,et al.  Numerical simulation of phase change material composite wallboard in a multi-layered building envelope , 2012 .

[29]  Na Zhu,et al.  Energy performance and optimal control of air-conditioned buildings with envelopes enhanced by phase change materials , 2011 .

[30]  Taeyeon Kim,et al.  Energy consumption analysis of a residential building with phase change materials under various cooling and heating conditions , 2014 .

[31]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in buildings and the effect of adding awnings , 2012 .

[32]  Mohammed M. Farid,et al.  Experimental and numerical investigations on the effect of using phase change materials for energy conservation in residential buildings , 2011 .

[33]  Ricardo M.S.F. Almeida,et al.  Numerical Analysis of the Energy Improvement of Plastering Mortars with Phase Change Materials , 2014 .

[34]  R. Velraj,et al.  Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management , 2008 .

[35]  Yi Jiang,et al.  Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings , 2006 .

[36]  Marcus Bianchi,et al.  Verification and validation of EnergyPlus phase change material model for opaque wall assemblies , 2012 .

[37]  Qunli Zhang,et al.  Performance of a hybrid heating system with thermal storage using shape-stabilized phase-change material plates , 2007 .

[38]  Giuseppe Peter Vanoli,et al.  Energy refurbishment of existing buildings through the use of phase change materials: Energy savings and indoor comfort in the cooling season , 2014 .

[39]  Jae-Goo Lee,et al.  The utilization of microencapsulated phase change material wallboards for energy saving , 2011 .

[40]  Alberto Giretti,et al.  Radiant floors integrated with PCM for indoor temperature control , 2011 .

[41]  Yoon-Bok Seong,et al.  Energy saving potentials of phase change materials applied to lightweight building envelopes , 2013 .

[42]  Lv Shilei,et al.  Impact of phase change wall room on indoor thermal environment in winter , 2006 .

[43]  A. Bontemps,et al.  Experimental and modelling study of twin cells with latent heat storage walls , 2011 .

[44]  André Bontemps,et al.  Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material , 2006 .

[45]  H. Brouwers,et al.  Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses , 2011 .

[46]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[47]  Hiroshi Yoshino,et al.  Preliminary Study of Passive Cooling Strategy Using a Combination of PCM and Copper Foam to Increase Thermal Heat Storage in Building Facade , 2010 .

[48]  G. Zannis,et al.  Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls , 2013 .