Performance Degradation Driven PID Controller Design

Abstract This paper is concerned with the design of the closed-loop control system, in order to take into account the system performance to load-disturbance and to set-point changes and its robustness to variation of the controlled process characteristics. The aim is to achieve a good balance between the multiple trade-offs. The proposed approach is complementary to the work presented by Arrieta and Vilanova (2011, 2012). Here, it is provided a PID design that allowing some degradation in the system's combined performance, achieves an increase in the robustness.

[1]  R. Vilanova,et al.  Simple Servo/Regulation Proportional–Integral–Derivative (PID) Tuning Rules for Arbitrary Ms-Based Robustness Achievement , 2012 .

[2]  Bengt Lennartson,et al.  Evaluation and simple tuning of PID controllers with high-frequency robustness , 2006 .

[3]  K. Astr,et al.  Revisiting the Ziegler – Nichols step response method for PID control , 2004 .

[4]  Tong Heng Lee,et al.  PI Tuning in Terms of Gain and Phase Margins , 1998, Autom..

[5]  D. P. Atherton,et al.  Automatic tuning of optimum PID controllers , 1993 .

[6]  Sigurd Skogestad,et al.  Simple analytic rules for model reduction and PID controller tuning , 2003 .

[7]  K. Åström,et al.  Revisiting the Ziegler-Nichols step response method for PID control , 2004 .

[8]  Stuart Bennett,et al.  The past of pid controllers , 2000, Annu. Rev. Control..

[9]  Ramon Vilanova,et al.  Simple PID tuning rules with guaranteed Ms robustness achievement , 2011 .

[10]  Ramon Vilanova,et al.  IMC based Robust PID design: Tuning guidelines and automatic tuning , 2008 .

[11]  James C. Hung,et al.  Internal Model Control , 2011, Control and Mechatronics.

[12]  Tore Hägglund,et al.  Advanced PID Control , 2005 .

[13]  Weng Khuen Ho,et al.  Tuning of PID controllers based on gain and phase margin specifications , 1995, Autom..

[14]  M. Morari,et al.  Internal model control: PID controller design , 1986 .

[15]  Tore Hägglund,et al.  Automatic tuning of simple regulators with specifications on phase and amplitude margins , 1984, Autom..

[16]  Tore Hägglund,et al.  Benchmark systems for PID control , 2000 .

[17]  J. G. Ziegler,et al.  Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.

[18]  D. Seborg,et al.  PI/PID controller design based on direct synthesis and disturbance rejection , 2002 .

[19]  H. T,et al.  The future of PID control , 2001 .

[20]  John A. Miller,et al.  TUNING CONTROLLERS WITH ERROR-INTEGRAL CRITERIA , 1967 .

[21]  Wen Tan,et al.  Comparison of some well-known PID tuning formulas , 2006, Comput. Chem. Eng..

[22]  Mark L. Nagurka,et al.  Design of PID controllers satisfying gain margin and sensitivity constraints on a set of plants , 2004, Autom..

[23]  Ramon Vilanova,et al.  PID autotuning for weighted servo/regulation control operation , 2010 .

[24]  Chang Chieh Hang,et al.  Getting more phase margin and performance out of PID controllers , 1999, Autom..