Parametric Optimization and Ranking Analysis of AA2024−Al2O3/AlN Alloy Composites Fabricated Via Stir Casting Route Under Dry Sliding Wear Investigation

[1]  Ashiwani Kumar,et al.  Investigations on Physical, Mechanical and Sliding Wear Assessment of ZA27 -Gr Alloy Composites Using Preference Selection Index Method , 2023, International Journal of Metalcasting.

[2]  Ashiwani Kumar,et al.  Fracture Toughness and Thermal Investigations of Al 7075 — Cobalt Particulates Reinforced Alloy Composites Prepared Using High Vacuum Casting Method for Gear Applications: Proposed Thermal Conductivity and Fracture Toughness Modeling , 2022, International Journal of Metalcasting.

[3]  A. Patnaik,et al.  Microstructure, Thermal, Thermo-mechanical and Fracture Analyses of Hybrid AA2024-SiC Alloy Composites , 2019, Transactions of the Indian Institute of Metals.

[4]  A. Patnaik,et al.  Application of Hybrid AHP-TOPSIS Technique in Analyzing Material Performance of Silicon Carbide Ceramic Particulate Reinforced AA2024 Alloy Composite , 2019, Silicon.

[5]  A. Patnaik,et al.  Silicon Carbide Ceramic Particulate Reinforced AA2024 Alloy Composite - Part I: Evaluation of Mechanical and Sliding Tribology Performance , 2019, Silicon.

[6]  A. Patnaik,et al.  Tribology Analysis of Cobalt Particulate Filled Al 7075 Alloy for Gear Materials: a Comparative Study , 2018, Silicon.

[7]  J. Selvam,et al.  Microstructure and mechanical characterization of in situ synthesized AA6061/(TiB2+Al2O3) hybrid aluminum matrix composites , 2018 .

[8]  F. Akhlaghi,et al.  Wear behaviour of Al6061-Al2O3 composites produced by in-situ powder metallurgy (IPM) , 2017 .

[9]  R. Abhijith,et al.  Fabrication & Analysis of Aluminium (Al-2024) and Tungsten Carbide (WC) Metal Matrix Composite by in-Situ Method , 2016 .

[10]  L. Kumaraswamidhas,et al.  Aerospace application on Al 2618 with reinforced – Si3N4, AlN and ZrB2 in-situ composites , 2016 .

[11]  D. Khanduja,et al.  Production and some properties of Si3N4 reinforced aluminium alloy composites , 2015 .

[12]  Sandeep Grover,et al.  Application of preference selection index method for decision making over the design stage of production system life cycle , 2015 .

[13]  M. Buzatu,et al.  Studies on wear rate and micro-hardness of the Al/Al2O3/Gr hybrid composites produced via powder metallurgy , 2015 .

[14]  R. Khorshidi,et al.  Comparative analysis between TOPSIS and PSI methods of materials selection to achieve a desirable combination of strength and workability in Al/SiC composite , 2013 .

[15]  K. Palanikumar,et al.  Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites , 2013 .

[16]  K. P. Arulshri,et al.  EVALUATION OF MECHANICAL PROPERTIES OF ALUMINIUM ALLOY 2024 REINFORCED WITH SILICON CARBIDE AND FLY ASH HYBRID METAL MATRIX COMPOSITES , 2013 .

[17]  K. Manisekar,et al.  Tribological properties of powder metallurgy – Processed aluminium self lubricating hybrid composites with SiC additions , 2013 .

[18]  M. Abbasi,et al.  A comparative study on the wear properties of coarse-grained Al6061 alloy and nanostructured Al6061–Al2O3 composites , 2012 .

[19]  Pradeep Kumar,et al.  Investigations on micro-mechanical and thermal characteristics of glass fiber reinforced epoxy based binary composite structure using finite element method , 2012 .

[20]  S. Kumar,et al.  Mechanical properties of SiCp/Al2O3 ceramic matrix composites prepared by directed oxidation of an aluminum alloy , 2012 .

[21]  R. Subramanian,et al.  Optimization of Tribological Properties in Aluminum Hybrid Metal Matrix Composites Using Gray-Taguchi Method , 2011, Journal of Materials Engineering and Performance.

[22]  F. Akhlaghi,et al.  Effect of the Graphite Content on the Tribological Behavior of Al/Gr and Al/30SiC/Gr Composites Processed by In Situ Powder Metallurgy (IPM) Method , 2011 .

[23]  B. Wielage,et al.  Thixoforming of AA 2017 aluminum alloy composites , 2011 .

[24]  M. Rahimian,et al.  The effect of particle size, sintering temperature and sintering time on the properties of Al–Al2O3 composites, made by powder metallurgy , 2009 .

[25]  Farshad Akhlaghi,et al.  Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024-graphite composites produced by in situ powder metallurgy method , 2009 .

[26]  M. Kök.  Abrasive wear of Al2O3 particle reinforced 2024 aluminium alloy composites fabricated by vortex method , 2006 .

[27]  A. Alpas,et al.  Effect of temperature on the sliding wear performance of Al alloys and Al matrix composites , 1996 .

[28]  Q. Xue,et al.  Wear of 2024 Al-Mo-SiC composites under lubrication , 1996 .

[29]  Ashiwani Kumar,et al.  Sliding wear performance of graphite reinforced AA6061 alloy composites for rotor drum/disk application , 2020 .

[30]  A. Patnaik,et al.  Tribological and thermomechanical analysis of CaO (quicklime) particulates filled ZA-27 alloy composites for bearing application , 2018 .

[31]  S. Chamoli,et al.  Characterization of Biodegradable Composites and Application of Preference Selection Index for Deciding Optimum Phase Combination , 2018 .

[32]  A. Patnaik,et al.  Effect of titanium metal powder on thermo- mechanical and sliding wear behavior of Al7075/Ti alloy composites for gear application , 2018 .

[33]  Bhaskar Chandra Kandpal,et al.  Fabrication and characterisation of Al2O3/aluminium alloy 6061 composites fabricated by Stir casting , 2017 .

[34]  H. Gitinavard,et al.  Evaluating the sustainable mining contractor selection problems: An imprecise last aggregation preference selection index method , 2017, Journal of Sustainable Mining.

[35]  A. Baradeswaran,et al.  A Statistical Analysis of Optimization of Wear Behaviour of Al- Al2O3 Composites Using Taguchi Technique☆ , 2013 .