Design considerations for elastomeric normally closed microfluidic valves

Abstract The ease of fabrication and integration of pneumatic microvalves has enabled extensive miniaturization of microfluidic devices capable of performing massively parallel operations. These valves in their typical open configuration, also known as normally open (NO) valves, require to be actuated to remain closed. As a result, devices employing these valves have limited portability in applications that require valves to be closed continuously. Normally closed (NC) valves based on pneumatic actuation not only address the above issue of portability, but also retain the ease of integrating massively parallel networks of microfluidic elements. In this paper, we report the design and fabrication of elastomeric NC microvalves, along with systematic experimental characterization of NC valve operation. Geometrical parameters of the valve, including shape, fluid channel width, membrane thickness, and valve asymmetry, were examined with the objective of minimizing actuation pressures and ensuring reliable operation. We observed that introduction of asymmetry in the valve geometry created points of weak adhesion between the valve and the substrate, which facilitated opening of the valve at lower actuation pressures. Specifically, valves with a sharp corner feature (v-shaped) actuated at lower pressures (1.5 psi) compared to straight-shaped valves (3 psi). We also observed that membrane thickness does not significantly influence the actuation pressures. An important requirement for microfluidic devices using NC valves is selective irreversible bonding of the fluid layer to the substrate, which we achieved by plasma sealing of the fluid layer to the substrate while simultaneously actuating the valves. Based on our experimental observations, we formulated a set of design considerations with the objective of minimizing actuation pressures, ensuring reliable operation, and facilitating convenient integration into complex microfluidic devices. These NC valves have significant potential in applications where portability is highly desired, such as in on-chip analysis, crystallization screening, and in the study of chemical or biological processes over long durations of time.

[1]  Daniel T Chiu,et al.  Disposable microfluidic substrates: transitioning from the research laboratory into the clinic. , 2011, Lab on a chip.

[2]  K. Kendall.  Thin-film peeling-the elastic term , 1975 .

[3]  Mehmet Fatih Yanik,et al.  Microfluidic system for on-chip high-throughput whole-animal sorting and screening at subcellular resolution , 2007, Proceedings of the National Academy of Sciences.

[4]  H. Hillborga,et al.  Crosslinked polydimethylsiloxane exposed to oxygen plasma studied by neutron reflectometry and other surface specific techniques , 2000 .

[5]  Daniel T Chiu,et al.  Disposable microfluidic devices: fabrication, function, and application. , 2005, BioTechniques.

[6]  Jiann H. Chen,et al.  Time Dependent Adhesion Induced Phenomena: The Flow of a Compliant Silicone-Polyester Copolymer Substrate Over Rigid Micrometer Size Gold and Polystyrene Particles , 1995 .

[7]  William H. Grover,et al.  Monolithic membrane valves and diaphragm pumps for practical large-scale integration into glass microfluidic devices , 2003 .

[8]  S. Quake,et al.  Monolithic microfabricated valves and pumps by multilayer soft lithography. , 2000, Science.

[9]  Brian N. Johnson,et al.  An integrated microfluidic device for influenza and other genetic analyses. , 2005, Lab on a chip.

[10]  Hengbing Zhao,et al.  Structure and characterization of a planar normally closed bulk-micromachined piezoelectric valve for fuel cell applications , 2005 .

[11]  Ryutaro Maeda,et al.  A pneumatically-actuated three-way microvalve fabricated with polydimethylsiloxane using the membrane transfer technique , 2000 .

[12]  R. Masel,et al.  A Bidirectional Electrostatic Microvalve With Microsecond Switching Performance , 2007, Journal of Microelectromechanical Systems.

[13]  Vincent Studer,et al.  Scaling properties of a low-actuation pressure microfluidic valve , 2004 .

[14]  David J Beebe,et al.  Microfluidic valve with cored glass microneedle for microinjection. , 2003, Lab on a chip.

[15]  William H. Grover,et al.  Development and multiplexed control of latching pneumatic valves using microfluidic logical structures. , 2006, Lab on a chip.

[16]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theory , 1993 .

[17]  Charles J. Choi,et al.  Microfluidic chip for combinatorial mixing and screening of assays. , 2009, Lab on a chip.

[18]  Grant D. Smith,et al.  Crosslinked polydimethylsiloxane exposed to oxygen plasma studied by neutron reflectometry and other surface specific techniques , 2000 .

[19]  Benjamin R. Schudel,et al.  Multiplexed detection of nucleic acids in a combinatorial screening chip. , 2011, Lab on a chip.

[20]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[21]  Chong H. Ahn,et al.  Institute of Physics Publishing Journal of Micromechanics and Microengineering a Review of Microvalves , 2022 .

[22]  Richard A Mathies,et al.  Microfabricated bioprocessor for integrated nanoliter-scale Sanger DNA sequencing. , 2006, Proceedings of the National Academy of Sciences of the United States of America.

[23]  Gwo-Bin Lee,et al.  A pneumatic micropump incorporated with a normally closed valve capable of generating a high pumping rate and a high back pressure , 2009 .

[24]  Axel Scherer,et al.  Experimentally validated quantitative linear model for the device physics of elastomeric microfluidic valves. , 2007, Journal of applied physics.

[25]  G. Kovacs.  Micromachined Transducers Sourcebook , 1998 .

[26]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. II. Experiments , 1993 .

[27]  Mehmet Toner,et al.  Cell handling using microstructured membranes. , 2006, Lab on a chip.

[28]  P. Willis,et al.  Monolithic photolithographically patterned Fluorocur PFPE membrane valves and pumps for in situ planetary exploration. , 2008, Lab on a chip.

[29]  Jeung Sang Go,et al.  A disposable, dead volume-free and leak-free in-plane PDMS microvalve☆ , 2004 .

[30]  S. Quake,et al.  Multistep Synthesis of a Radiolabeled Imaging Probe Using Integrated Microfluidics , 2005, Science.