Microstructural Evolution and Strengthening of AM90 Magnesium Alloy Processed by ECAP

[1]  M. Rathod,et al.  Combined effect of shot peening, subcritical austenitic nitriding, and cryo-treatment on surface modification of AISI 4140 steel , 2017 .

[2]  Qudong Wang,et al.  Enhanced microstructure homogeneity and mechanical properties of AZ91–SiC nanocomposites by cyclic closed-die forging , 2017 .

[3]  S. Shekhar,et al.  Microstructural Inhomogeneity in Constrained Groove Pressed Cu-Zn Alloy Sheet , 2016, Journal of Materials Engineering and Performance.

[4]  Y. Ivanisenko,et al.  High Pressure Torsion Extrusion as a new severe plastic deformation process , 2016 .

[5]  B. P. Kashyap,et al.  A Process of Notch Wavy Rolling for Strengthening Metal Sheets , 2016 .

[6]  S. Shekhar,et al.  Controlled Evolution of Coincidence Site Lattice Related Grain Boundaries , 2016, Transactions of the Indian Institute of Metals.

[7]  Jacques Huot,et al.  High-Pressure Torsion , 2016 .

[8]  Jia Pei,et al.  Effects of cyclic extrusion and compression parameters on microstructure and mechanical properties of Mg–1.50Zn–0.25Gd alloy , 2015 .

[9]  Qudong Wang,et al.  Microstructure evolution and mechanical properties of SiC nanoparticles reinforced magnesium matrix composite processed by cyclic closed-die forging , 2015 .

[10]  H. Jafarian,et al.  Microstructure evolution and mechanical properties in ultrafine grained Al/TiC composite fabricated by accumulative roll bonding , 2015 .

[11]  Zhi Li,et al.  Effects of ECAE processing temperature on the microstructure, mechanical properties, and corrosion behavior of pure Mg , 2015, International Journal of Minerals, Metallurgy, and Materials.

[12]  B. Sunil.  Repetitive Corrugation and Straightening of Sheet Metals , 2015 .

[13]  W. Ding,et al.  Microstructure evolution and mechanical properties of quasicrystal-reinforced Mg-Zn-Gd alloy processed by cyclic extrusion and compression , 2015 .

[14]  S. A. J. Jahromi,et al.  Influence of ECAP on the fatigue behavior of age-hardenable 2xxx aluminum alloy , 2015, International Journal of Minerals, Metallurgy, and Materials.

[15]  T. Langdon,et al.  Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion , 2015 .

[16]  K. Sankaranarayanasamy,et al.  A Comparative Study of Commercially Pure Aluminum Processed by ECAP Using Conventional and New Die , 2014 .

[17]  A. K. Tieu,et al.  Fabrication of Nanostructured Aluminum Sheets Using Four-Layer Accumulative Roll Bonding , 2014 .

[18]  K. Jung,et al.  Formability of ZK60A Magnesium Alloy Determined by Compression and Backward Extrusion , 2014 .

[19]  H. Jahed,et al.  ECAP effect on the micro-structure and mechanical properties of AM30 magnesium alloy , 2014 .

[20]  Y. Estrin,et al.  Extreme grain refinement by severe plastic deformation: A wealth of challenging science , 2013 .

[21]  F. Fereshteh-Saniee,et al.  Microstructural homogeneity, texture, tensile and shear behavior of AM60 magnesium alloy produced by extrusion and equal channel angular pressing , 2013 .

[22]  M. Jahedi,et al.  Three dimensional finite element study on torsion extrusion processing of 1050 aluminum alloy , 2012 .

[23]  J. Valder,et al.  Forming of Tubular Commercial Purity Aluminum by ECAP , 2012 .

[24]  G. Faraji,et al.  Accumulative Torsion Back (ATB) Processing as a New Plastic Deformation Technique , 2012 .

[25]  M. R. Toroghinejad,et al.  Nano/Ultrafine Structured AA1100 by ARB Process , 2011 .

[26]  Hongge Yan,et al.  Effect of twinning and dynamic recrystallization on the high strain rate rolling process , 2010 .

[27]  M. H. Paydar,et al.  Study on the feasibility of the torsion extrusion (TE) process as a severe plastic deformation method for consolidation of Al powder , 2010 .

[28]  Katsumi Watanabe,et al.  Effect of Casting Method and Al Contents on Microstructure in AM-Type Magnesium Alloys , 2010 .

[29]  Hyoung-Seop Kim,et al.  Analyses of route Bc equal channel angular pressing and post-equal channel angular pressing behavior by the finite element method , 2010 .

[30]  X. Feng,et al.  Microstructure evolution and mechanical behavior of AZ31 Mg alloy processed by equal-channel angular pressing , 2009 .

[31]  M. K. Kulekci.  Magnesium and its alloys applications in automotive industry , 2008 .

[32]  T. Tomida,et al.  Super Short Interval Multi-pass Rolling Process for Ultrafine-grained Hot Strip , 2008 .

[33]  Terence G. Langdon,et al.  Using high-pressure torsion for metal processing: Fundamentals and applications , 2008 .

[34]  M. Mabuchi,et al.  Twinning behavior and deformation mechanisms of extruded AZ31 Mg alloy , 2008 .

[35]  M. Hirscher,et al.  Metal hydride materials for solid hydrogen storage: a review , 2007 .

[36]  R. Valiev,et al.  Principles of equal-channel angular pressing as a processing tool for grain refinement , 2006 .

[37]  M. S. Yong,et al.  Deformation Behavior Study of Multi-Pass ECAE Process for Fabrication of Ultrafine or Nanostructured Bulk Materials , 2006 .

[38]  Kaori Miyata,et al.  Development of super short interval multi-pass rolling technology for ultra fine-grained hot strip , 2006 .

[39]  J. C. Huang,et al.  Relationship between texture and low temperature superplasticity in an extruded AZ31 Mg alloy processed by ECAP , 2005 .

[40]  M. Nakagaki,et al.  Development of Severe Torsion Straining Process for Rapid Continuous Grain Refinement , 2004 .

[41]  W. Kim,et al.  Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation , 2004 .

[42]  R. Valiev,et al.  The use of severe plastic deformation techniques in grain refinement , 2004 .

[43]  Tao Liu,et al.  Mechanical properties of a two-phase alloy Mg–8%Li–1%Al processed by equal channel angular pressing , 2003 .

[44]  K. Maruyama,et al.  The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys , 2003 .

[45]  Henry Hu,et al.  Potential Magnesium Alloys for High Temperature Die Cast Automotive Applications: A Review , 2003 .

[46]  Jong-jin Park,et al.  Constrained groove pressing and its application to grain refinement of aluminum , 2002 .

[47]  T. Mukai,et al.  Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure , 2001 .

[48]  T. Langdon,et al.  Review: Processing of metals by equal-channel angular pressing , 2001 .

[49]  K. Kainer.  Verfahren und Produkte , 1997, HTM Journal of Heat Treatment and Materials.

[50]  Tetsuo Sakai,et al.  Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process , 1999 .

[51]  T. Langdon,et al.  Principle of equal-channel angular pressing for the processing of ultra-fine grained materials , 1996 .

[52]  Jeffrey Wadsworth,et al.  Hall-petch relation in nanocrystalline solids , 1991 .

[53]  J. Jonas,et al.  Formability and workability of metals : plastic instability and flow localization , 1984 .

[54]  N. Richard,et al.  Grain‐Boundary Diffusion , 1961 .