Enhancing the High-Temperature Strength of a Co-Base Superalloy by Optimizing the γ/γ′ Microstructure

Compositionally complex polycrystalline γ/γ′ CoNi-base superalloys, such as CoWAlloy2 (Co41-Ni32-Cr12-Al9-W5-Ti0.3-Ta0.2-Si0.4-Hf0.1-C-B-Zr) are interesting candidates for new high-temperature materials. To maximize their high-temperature strength, the γ/γ′ microstructure has to be optimized by adjusting the multi-step heat treatments. Various microstructures after different heat treatments were analyzed by scanning and transmission electron microscopy and especially in-situ small-angle neutron scattering during heat treatment experiments. The corresponding mechanical properties were determined by compression tests and hardness measurements. From this, an optimum γ′ precipitate size was determined that is adjusted mainly in the first precipitation heat treatment step. This is discussed on the basis of the theory of shearing of γ′ precipitates by weak and strong pair-couplings of dislocations. A second age hardening step leads to a further increase in the γ′ volume fraction above 70% and the formation of tertiary γ′ precipitates in the γ channels, resulting in an increased hardness and yield strength. A comparison between two different three-step heat treatments revealed an increase in strength of 75 MPa for the optimized heat treatment.

[1]  H. Arabi,et al.  Investigation on the homogenization treatment and element segregation on the microstructure of a γ/γ′-cobalt-based superalloy , 2019, International Journal of Minerals, Metallurgy, and Materials.

[2]  S. Neumeier,et al.  The grain boundary pinning effect of the μ phase in an advanced polycrystalline γ/γ′ Co-base superalloy , 2018, Journal of Alloys and Compounds.

[3]  D. Seidman,et al.  Multicomponent γ’-strengthened Co-based superalloys with increased solvus temperatures and reduced mass densities , 2018 .

[4]  S. Neumeier,et al.  High temperature properties and fatigue strength of novel wrought γ/γ′ Co-base superalloys , 2017 .

[5]  S. Neumeier,et al.  Segregation assisted microtwinning during creep of a polycrystalline L12-hardened Co-base superalloy , 2017 .

[6]  L. Karge,et al.  Stability of TaC precipitates in a Co–Re-based alloy being developed for ultra-high-temperature applications , 2016 .

[7]  S. Neumeier,et al.  Novel wrought γ/γ′ cobalt base superalloys with high strength and improved oxidation resistance , 2015 .

[8]  C. Rae,et al.  On the prediction of the yield stress of unimodal and multimodal γ′ Nickel-base superalloys , 2015 .

[9]  Ingo Breßler,et al.  SASfit: a tool for small-angle scattering data analysis using a library of analytical expressions , 2015, Journal of applied crystallography.

[10]  M. Hardy,et al.  A New Polycrystalline Co-Ni Superalloy , 2014 .

[11]  E. Lass,et al.  γ′ Phase Stability and Phase Equilibrium in Ternary Co-Al-W at 900 °C , 2014 .

[12]  D. Dye,et al.  Effect of alloying on the oxidation behaviour of Co–Al–W superalloys , 2014 .

[13]  S. Virtanen,et al.  Effect of B and Cr on the high temperature oxidation behaviour of novel γ/γ′-strengthened Co-base superalloys , 2011 .

[14]  H. Adachi,et al.  Plastic deformation of polycrystals of Co3(Al,W) with the L12 structure , 2011 .

[15]  R. Gilles,et al.  In Situ Investigation with Neutrons on the Evolution of γ ' Precipitates at High Temperatures in a Single Crystal Ni-Base Superalloy , 2011 .

[16]  Tresa M. Pollock,et al.  Strengthening Mechanisms in Polycrystalline Multimodal Nickel-Base Superalloys , 2009 .

[17]  J. Rösler,et al.  Microstructural characterisation of a Ni–Fe-based superalloy by in situ small-angle neutron scattering measurements , 2008 .

[18]  K. Kishida,et al.  Single-crystal elastic constants of Co-3(Al,W) with the L1(2) structure , 2007 .

[19]  R. Gilles,et al.  The concept of the new small-angle scattering instrument SANS-1 at the FRM-II , 2006 .

[20]  K. Ishida,et al.  Cobalt-Base High-Temperature Alloys , 2006, Science.

[21]  R. Gilles,et al.  Microstructural characterization of a modified 706-type Ni-Fe superalloy by small-angle neutron scattering and electron microscopy , 2005 .

[22]  G. Bruno,et al.  In situ small-angle neutron scattering investigation of the γ′ precipitation and growth in the nickel-based single-crystal alloy SC16 , 2005 .

[23]  U. Keiderling,et al.  The new ‘BerSANS-PC’ software for reduction and treatment of small angle neutron scattering data , 2002 .

[24]  R. F. Hall,et al.  Elevated temperature fatigue crack growth under dwell conditions in Waspaloy , 1997 .

[25]  T. Pollock,et al.  Creep-induced planar defects in L12-containing Co- and CoNi-base single-crystal superalloys , 2015 .

[26]  H. Stone,et al.  Characterization of Gamma Prime (γ′) Precipitates in a Polycrystalline Nickel-Base Superalloy Using Small-Angle Neutron Scattering , 2011 .