Design of magnetorheological brake for forearm rotation of a wrist prosthesis*

A wrist joint in upper limb prostheses significantly increases its handling capacity. However, current prostheses cannot reproduce the ability of torque combined with the volume and weight of the human wrist. Consequently, they do not provide high efficiency in handling and generate user dissatisfaction. In this context, this study aims to optimal design a wrist supination and pronation brake to improve the handling capacity of an upper limb prosthesis. The wrist actuator consists of an EC motor and harmonic drive parallel with a magnetorheological brake. The brake guarantees a fast response time, low energy consumption, controllability, and small dimensions. A particle swarm algorithm is applied to optimize design variables to minimize mass and energy consumption. As a result, the brake provided resistive torque of 7.4 N.m with dimensions close to a healthy member and weighing 0.1972 kg. Finally, a finite element analysis confirmed a satisfactory magnetic flux for the magnetorheological brake operating conditions. The designed brake addressed all the desired characteristics and is suitable to integrate the forearm prosthesis with wrist rotation.

[1]  Dezheng Hua,et al.  A Review on Structural Configurations of Magnetorheological Fluid Based Devices Reported in 2018–2020 , 2021, Frontiers in Materials.

[2]  Marcos Pinotti,et al.  Novel active magnetorheological knee prosthesis presents low energy consumption during ground walking , 2021, Journal of Intelligent Material Systems and Structures.

[3]  Luigi Pelliccia,et al.  Wrist at risk? - Considerations derived from a novel experimental setup to assess torques during hip reaming with potential implications on the orthopedic surgeons' health. , 2020, Journal of the mechanical behavior of biomedical materials.

[4]  Radhe Shyam Tak Saini,et al.  Optimal Design of Rotary Magneto-Rheological Drum Brake for Transfemoral Prosthesis , 2020 .

[5]  Marcos Pinotti,et al.  Evaluating Energy Consumption of an Active Magnetorheological Knee Prosthesis , 2019, 2019 19th International Conference on Advanced Robotics (ICAR).

[6]  Norsinnira Zainul Azlan,et al.  3-D Dynamic Modeling and Validation of Human Arm for Torque Determination During Eating Activity Using Kane’s Method , 2019, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering.

[7]  Albert H Vette,et al.  Characterization of normative angular joint kinematics during two functional upper limb tasks. , 2019, Gait & posture.

[8]  Neil M. Bajaj,et al.  State of the Art in Artificial Wrists: A Review of Prosthetic and Robotic Wrist Design , 2019, IEEE Transactions on Robotics.

[9]  R. A. R. C. Gopura,et al.  Transradial prostheses: Trends in development of hardware and control systems , 2018, The international journal of medical robotics + computer assisted surgery : MRCAS.

[10]  Richard R. Navas,et al.  Prototype of Robotic Ankle-Foot Prosthesis with Active Damping Using Magnetorheological Fluids , 2019, International Journal of Mechanical Engineering and Robotics Research.

[11]  Claysson Bruno Santos Vimieiro,et al.  Optimal design and torque control of an active magnetorheological prosthetic knee , 2018, Smart Materials and Structures.

[12]  Seung-Bok Choi,et al.  Design of a novel 6-DOF haptic master mechanism using MR clutches and gravity compensator , 2018, Mechanics Based Design of Structures and Machines.

[13]  Hassan Sayyaadi,et al.  Optimization and Testing of a New Prototype Hybrid MR Brake With Arc Form Surface as a Prosthetic Knee , 2018, IEEE/ASME Transactions on Mechatronics.

[14]  Ismail Sahin,et al.  Dynamic tests of MR (Magnetorheologic) damper and analysis of response characteristics in semi-active knee prosthesis , 2017, 2017 25th Signal Processing and Communications Applications Conference (SIU).

[15]  Seung-Bok Choi,et al.  Development of haptic system for surgical robot , 2017, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[16]  Wei-Hsin Liao,et al.  Optimal design of a magnetorheological damper used in smart prosthetic knees , 2017 .

[17]  Chao-Chieh Lan,et al.  A Humanoid Robotic Wrist With Two-Dimensional Series Elastic Actuation for Accurate Force/Torque Interaction , 2016, IEEE/ASME Transactions on Mechatronics.

[18]  Y. Yoshii,et al.  Measurement of wrist flexion and extension torques in different forearm positions , 2015, Biomedical engineering online.

[19]  Dingguo Zhang,et al.  A structurally decoupled mechanism for measuring wrist torque in three degrees of freedom. , 2015, The Review of scientific instruments.

[20]  Hassan Sayyaadi,et al.  Prosthetic knee using of hybrid concept of magnetorheological brake with a T-shaped drum , 2015, 2015 IEEE International Conference on Mechatronics and Automation (ICMA).

[21]  Rammohan V. Maikala,et al.  Maximal Acceptable Torques of Six Highly Repetitive Hand-Wrist Motions for Male Industrial Workers , 2013, Hum. Factors.

[22]  K. Iramina,et al.  A measurement of a motion of pronation and supination of a forearm for healthy subjects using wireless acceleration and angular velocity sensors , 2013 .

[23]  Carlo Menon,et al.  Towards the development of a robust model for estimating wrist torque at different wrist angles , 2012, 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[24]  Seung-Bok Choi,et al.  Optimal Design Methodology of Magnetorheological Fluid Based Mechanisms , 2012 .

[25]  Chao-Chieh Lan,et al.  Development of a compact wrist mechanism with high torque density , 2012, 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[26]  Rammohan V. Maikala,et al.  Maximal Acceptable Torques of Highly Repetitive Screw Driving, Wrist Flexion and Extension with a Pinch grip, Ulnar Deviation, and Handgrip Tasks for Seven Hour Workdays for Male Industrial Workers , 2011 .

[27]  Freygardur Thorsteinsson,et al.  A geometrical optimization of a magneto-rheological rotary brake in a prosthetic knee , 2010 .

[28]  Halldór Pálsson,et al.  Influence of Parameter Variations on the Braking Torque of a Magnetorheological Prosthetic Knee , 2009 .

[29]  F. Jonsdottir,et al.  A Multi-Objective Design Optimization of a Smart Magneto-Rheological Prosthetic Knee , 2009 .

[30]  André Preumont,et al.  Portable smart wrist rehabilitation device driven by rotational MR-fluid brake actuator for telemedecine applications , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[31]  M. Bouzit,et al.  A Novel Single Digit Manipulator for Prosthetic Hand Applications , 2007, 2007 IEEE Systems and Information Engineering Design Symposium.

[32]  K. Koyanagi,et al.  Research and Development of the Intelligently-Controlled Prosthetic Ankle Joint , 2006, 2006 International Conference on Mechatronics and Automation.

[33]  J. Macdermid,et al.  Forearm pronation and supination: reliability of absolute torques and nondominant/dominant ratios. , 1994, Journal of hand therapy : official journal of the American Society of Hand Therapists.

[34]  E. Chao,et al.  A biomechanical study of normal functional elbow motion. , 1981, The Journal of bone and joint surgery. American volume.

[35]  C. L. Taylor,et al.  The biomechanics of control in upper-extremity prostheses. , 1955, Artificial limbs.