Geomechanical Properties of Thinly Interbedded Rocks Based on Micro- and Macro-Scale Measurements

[1]  An Liu,et al.  Nano-scale mechanical properties of constituent minerals in shales investigated by combined nanoindentation statistical analyses and SEM-EDS-XRD techniques , 2022, International Journal of Rock Mechanics and Mining Sciences.

[2]  Lei Ge,et al.  Lightweight proppants in unconventional oil and natural gas development: A review , 2022, Sustainable Materials and Technologies.

[3]  Kan Wu,et al.  An Efficient Model for Hydraulic Fracture Height Growth Considering the Effect of Bedding Layers in Unconventional Shale Formations , 2022, SPE Journal.

[4]  P. Ranjith,et al.  Experimental study of micromechanical properties alterations of shale matrix treated by ScCO2-Water saturation using nanoindentation tests , 2022, Energy.

[5]  Haomin Liu,et al.  Shale gas investment decision-making: Green and efficient development under market, technology and environment uncertainties , 2022, Applied Energy.

[6]  Mian Chen,et al.  The study of hydraulic fracture height growth in coal measure shale strata with complex geologic characteristics , 2022, Journal of Petroleum Science and Engineering.

[7]  Q. Hu,et al.  Recent advances in the mechanical characterization of shales at nano-to micro-scales: A review , 2021, Mechanics of Materials.

[8]  Zhaohui Lu,et al.  Influence of formation in-situ stress on mechanical heterogeneity of shale through grid nanoindentation , 2021, Petroleum Science.

[9]  P. Newell,et al.  Thermo-mechanical characterization of shale using nanoindentation , 2021, Scientific Reports.

[10]  J. Rutqvist,et al.  A comprehensive review of proppant embedment in shale reservoirs: Experimentation, modeling and future prospects , 2021 .

[11]  Jinzhou Zhao,et al.  Fracability Evaluation Method for Tight Sandstone Oil Reservoirs , 2021, Natural Resources Research.

[12]  T. Charlton,et al.  Effect of Diagenesis on Geomechanical Properties of Organic‐Rich Calcareous Shale: A Multiscale Investigation , 2021, Journal of Geophysical Research: Solid Earth.

[13]  L. Kong,et al.  Mechanical response of the Middle Bakken rocks under triaxial compressive test and nanoindentation , 2021 .

[14]  Reza Hafezi,et al.  Global natural gas demand to 2025: A learning scenario development model , 2021 .

[15]  Hui Zhou,et al.  Geomechanical model test for analysis of surrounding rock behaviours in composite strata , 2021 .

[16]  Hongfei Cheng,et al.  Recent advances in kaolinite-based material for photocatalysts , 2021 .

[17]  R. Liu,et al.  Mechanical properties of rock–coal bi-material samples with different lithologies under uniaxial loading , 2020 .

[18]  A. Whittle,et al.  Characterization of meso-scale mechanical properties of Longmaxi shale using grid microindentation experiments , 2020, Journal of Rock Mechanics and Geotechnical Engineering.

[19]  Sabine Gilbricht,et al.  SEM-Based Automated Mineralogy and Its Application in Geo- and Material Sciences , 2020 .

[20]  B. Galanov,et al.  Indentation of bituminous coals: Fracture, crushing and dust formation , 2020 .

[21]  M. Rouainia,et al.  Geomechanical characterisation of organic-rich calcareous shale using AFM and nanoindentation , 2020, Rock Mechanics and Rock Engineering.

[22]  Yan Jin,et al.  Cross-scale characterization of the elasticity of shales: Statistical nanoindentation and data analytics , 2020 .

[23]  G. Yin,et al.  Mechanical Properties of Layered Composite Coal–Rock Subjected to True Triaxial Stress , 2020, Rock Mechanics and Rock Engineering.

[24]  B. Bai,et al.  Application of nanoindentation technology for characterizing the mechanical properties of shale before and after supercritical CO2 fluid treatment , 2020 .

[25]  Quangui Li,et al.  Experimental investigation on crack competitive extension during hydraulic fracturing in coal measures strata , 2020 .

[26]  Jun-Wei Zhong,et al.  A new type U-Th-REE-Nb mineralization related to albitite: A case study from the Chachaxiangka deposit in the northeastern Qaidam Basin of China , 2019, China Geology.

[27]  C. Ehlig-Economides,et al.  Investigation of Rupture and Slip Mechanisms of Hydraulic Fractures in Multiple-Layered Formations , 2019, SPE Journal.

[28]  M. Swain,et al.  Nanoindentation-based study of the mechanical behavior of bulk supercrystalline ceramic-organic nanocomposites , 2019, Journal of the European Ceramic Society.

[29]  Zhangxin Chen,et al.  Effects of wellbore interference on concurrent gas production from multi-layered tight sands: A case study in eastern Ordos Basin, China , 2019, Journal of Petroleum Science and Engineering.

[30]  Yulong Chen,et al.  Deformation failure characteristics of coal–rock combined body under uniaxial compression: experimental and numerical investigations , 2018, Bulletin of Engineering Geology and the Environment.

[31]  Shuangfang Lu,et al.  Heterogeneity characterization of the lower Silurian Longmaxi marine shale in the Pengshui area, South China , 2018, International Journal of Coal Geology.

[32]  B. Tokhmechi,et al.  Statistical grid nanoindentation analysis to estimate macro-mechanical properties of the Bakken Shale , 2018 .

[33]  Martin Sauter,et al.  A review on challenges in the assessment of geomechanical rock performance for deep geothermal reservoir development , 2018 .

[34]  Chao Li,et al.  In-situ stress state in the Linxing region, eastern Ordos Basin, China: Implications for unconventional gas exploration and production , 2017 .

[35]  M. Mack,et al.  Fully coupled simulation of a hydraulic fracture interacting with natural fractures with a hybrid discrete‐continuum method , 2017 .

[36]  Zhengbing Qi,et al.  Nanoindentation induced plastic deformation in nanocrystalline ZrN coating , 2016 .

[37]  E. Wang,et al.  Effect of rock strength on failure mode and mechanical behavior of composite samples , 2015, Arabian Journal of Geosciences.

[38]  Jiehui Yuan,et al.  A review of the technical and economic evaluation techniques for shale gas development , 2015 .

[39]  M. Amro,et al.  Indentaion Hardness for Improved Proppant Embedment Prediction in Shale Formations , 2015 .

[40]  E. Hoek,et al.  Fracture initiation and propagation in intact rock – A review , 2014 .

[41]  K. Bjørlykke.  Relationships between depositional environments, burial history and rock properties. Some principal aspects of diagenetic process in sedimentary basins , 2014 .

[42]  Bo Zhang,et al.  Fracability Evaluation in Shale Reservoirs - An Integrated Petrophysics and Geomechanics Approach , 2014 .

[43]  M. Zoback,et al.  Mechanical properties of shale-gas reservoir rocks — Part 1: Static and dynamic elastic properties and anisotropy , 2013 .

[44]  E. Herbert,et al.  Continuous stiffness measurement during instrumented indentation testing , 2010 .

[45]  A. Vervoort,et al.  Failure of Layered Sandstone under Brazilian Test Conditions: Effect of Micro-Scale Parameters on Macro-Scale Behaviour , 2010 .

[46]  H. Gu,et al.  Effect of Formation Modulus Contrast on Hydraulic Fracture Height Containment , 2008 .

[47]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[48]  Yang-Tse Cheng,et al.  Scaling relationships for indentation measurements , 2002 .

[49]  Y. Gogotsi,et al.  Effect of phase transformations on the shape of the unloading curve in the nanoindentation of silicon , 2000 .

[50]  Hu Li.  Research progress on evaluation methods and factors influencing shale brittleness: A review , 2022, Energy Reports.

[51]  I. Hussein,et al.  CO2 enhanced gas recovery and sequestration in depleted gas reservoirs: A review , 2021 .

[52]  A. Ghassemi,et al.  Three dimensional finite element simulations of hydraulic fracture height growth in layered formations using a coupled hydro-mechanical model , 2020 .

[53]  Shang Xu,et al.  Multiscale petrographic heterogeneity and their implications for the nanoporous system of the Wufeng-Longmaxi shales in Jiaoshiba area, Southeast China: Response to depositional-diagenetic process , 2019 .

[54]  D. Groves,et al.  Controls on the heterogeneous distribution of mineral deposits through time , 2005, Geological Society, London, Special Publications.

[55]  Hilde van der Togt,et al.  Publisher's Note , 2003, J. Netw. Comput. Appl..