Influence of the radial-lip concept design to achieve ultra-low soot emission reductions: An optical analysis
暂无分享,去创建一个
[1] F. Millo,et al. Mixture formation and combustion process analysis of an innovative diesel piston bowl design through the synergetic application of numerical and optical techniques , 2022, Fuel.
[2] F. Millo,et al. Numerical Assessment of Additive Manufacturing-Enabled Innovative Piston Bowl Design for a Light-Duty Diesel Engine Achieving Ultra-Low Engine-Out Soot Emissions , 2021, SAE International Journal of Engines.
[3] J. M. García-Oliver,et al. Combustion Behaviour of Blends of Synthetic Fuels in an Optical Single Cylinder Engine , 2021, SAE Technical Paper Series.
[4] Antonio García,et al. Effect of a novel piston geometry on the combustion process of a light-duty compression ignition engine: An optical analysis , 2021, Energy.
[5] J. M. García-Oliver,et al. Comparison of the Diffusive Flame Structure for Dodecane and OMEX Fuels for Conditions of Spray A of the ECN , 2020 .
[6] Antonio García,et al. Soot reduction for cleaner Compression Ignition Engines through innovative bowl templates , 2020, International Journal of Engine Research.
[7] A. Boscolo,et al. Experimental Study of Additive-Manufacturing-Enabled Innovative Diesel Combustion Bowl Features for Achieving Ultra-Low Emissions and High Efficiency , 2020 .
[8] I. Denbratt,et al. Role of fuel properties and piston shape in influencing soot oxidation in heavy-duty low swirl diesel engine combustion , 2019, Fuel.
[9] R. Payri,et al. Analysis of counterbore effect in five diesel common rail injectors , 2019, Experimental Thermal and Fluid Science.
[10] I. Denbratt,et al. Role of Piston Bowl Shape to Enhance Late-Cycle Soot Oxidation in Low-Swirl Diesel Combustion , 2019, SAE International Journal of Engines.
[11] Javier Monsalve-Serrano,et al. Fuel consumption and engine-out emissions estimations of a light-duty engine running in dual-mode RCCI/CDC with different fuels and driving cycles , 2018, Energy.
[12] Kenneth S. Kim,et al. Effect of after injections on late cycle soot oxidation in a small-bore diesel engine , 2018 .
[13] Alok Warey,et al. Experimental and Numerical Studies of Bowl Geometry Impacts on Thermal Efficiency in a Light-Duty Diesel Engine , 2018 .
[14] Javier Monsalve-Serrano,et al. Evaluating the emissions and performance of two dual-mode RCCI combustion strategies under the World Harmonized Vehicle Cycle (WHVC) , 2017 .
[15] N. Mikami,et al. Realizing Robust Combustion with High Response Diesel Injector with Controlled Diffusive Spray Nozzle and Closed Loop Injection Control , 2017 .
[16] Javier Monsalve-Serrano,et al. Evaluating the reactivity controlled compression ignition operating range limits in a high-compression ratio medium-duty diesel engine fueled with biodiesel and ethanol , 2017 .
[17] Javier Monsalve-Serrano,et al. Dual-Fuel Combustion for Future Clean and Efficient Compression Ignition Engines , 2016 .
[18] Martin Tuner,et al. Experimental Comparison of Heat Losses in Stepped-Bowl and Re-Entrant Combustion Chambers in a Light Duty Diesel Engine , 2016 .
[19] Hongming Xu,et al. Numerical Investigation of GDI Injector Nozzle Geometry on Spray Characteristics , 2015 .
[20] G. Neely,et al. Investigation of Alternative Combustion Crossing Stoichiometric Air Fuel Ratio for Clean Diesels , 2007 .
[21] Dennis L. Siebers,et al. Measurement of the Flame Lift-Off Location on DI Diesel Sprays Using OH Chemiluminescence , 2001 .
[22] Takeyuki Kamimoto,et al. A Study on the Time and Space Resolved Measurement of Flame Temperature and Soot Concentration in a D. I. Diesel Engine by the Two-Color Method , 1979 .
[23] Javier Monsalve-Serrano,et al. Impact of counter-bore nozzle on the combustion process and exhaust emissions for light-duty diesel engine application , 2018, International Journal of Engine Research.
[24] N Ladommatos,et al. Optical diagnostics for soot and temperature measurement in diesel engines , 1998 .