Automatic method of analysis of OCT images in the assessment of the tooth enamel surface after orthodontic treatment with fixed braces

IntroductionFixed orthodontic appliances, despite years of research and development, still raise a lot of controversy because of its potentially destructive influence on enamel. Therefore, it is necessary to quantitatively assess the condition and therein the thickness of tooth enamel in order to select the appropriate orthodontic bonding and debonding methodology as well as to assess the quality of enamel after treatment and clean-up procedure in order to choose the most advantageous course of treatment. One of the assessment methods is computed tomography where the measurement of enamel thickness and the 3D reconstruction of image sequences can be performed fully automatically.Material and methodOCT images of 180 teeth were obtained from the Topcon 3D OCT-2000 camera. The images were obtained in vitro by performing sequentially 7 stages of treatment on all the teeth: before any interference into enamel, polishing with orthodontic paste, etching and application of a bonding system, orthodontic bracket bonding, orthodontic bracket removal, cleaning off adhesive residue. A dedicated method for the analysis and processing of images involving median filtering, mathematical morphology, binarization, polynomial approximation and the active contour method has been proposed.ResultsThe obtained results enable automatic measurement of tooth enamel thickness in 5 seconds using the Core i5 CPU M460 @ 2.5GHz 4GB RAM. For one patient, the proposed method of analysis confirms enamel thickness loss of 80 μm (from 730 ± 165 μm to 650 ± 129 μm) after polishing with paste, enamel thickness loss of 435 μm (from 730 ± 165 μm to 295 ± 55 μm) after etching and bonding resin application, growth of a layer having a thickness of 265 μm (from 295 ± 55 μm to 560 ± 98 μm after etching) which is the adhesive system. After removing an orthodontic bracket, the adhesive residue was 105 μm and after cleaning it off, the enamel thickness was 605 μm. The enamel thickness before and after the whole treatment decreased by about 125 μm.ConclusionsThis paper presents an automatic quantitative method for the assessment of tooth enamel thickness. This method has proven to be an effective diagnostic tool that allows evaluation of the surface and cross section of tooth enamel after orthodontic treatment with fixed thin-arched braces and proper selection of the methodology and course of treatment.

[1]  Barbara Pilawa,et al.  ELECTRON PARAMAGNETIC RESONANCE STUDIES OF GAMMA IRRADIATED AZITHROMYCIN , 2008 .

[2]  Hobin Kang,et al.  Nondestructive monitoring of the repair of enamel artificial lesions by an acidic remineralization model using polarization-sensitive optical coherence tomography. , 2012, Dental materials : official publication of the Academy of Dental Materials.

[3]  Piotr Porwik,et al.  Efficient spectral method of identification of linear Boolean function , 2004 .

[4]  Jerzy Nowak,et al.  Placement of a crystalline lens and intraocular lens: Retinal image quality. , 2006, Journal of biomedical optics.

[5]  J. Warren,et al.  Effect of a self-etch primer/adhesive on the shear bond strength of orthodontic brackets. , 2001, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[6]  P. Major,et al.  An evaluation and comparison of orthodontic bracket bond strengths achieved with self-etching primer. , 2004, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[7]  Shijian Lu,et al.  Automated layer segmentation of optical coherence tomography images , 2010, 2010 5th IEEE Conference on Industrial Electronics and Applications.

[8]  Daniel Fried,et al.  Polarization-sensitive optical coherence tomographic imaging of artificial demineralization on exposed surfaces of tooth roots. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[9]  M. Iwanowski,et al.  Multistage morphological segmentation of bright-field and fluorescent microscopy images , 2012 .

[10]  I. Krejci,et al.  Three-dimensional measurement of enamel loss caused by bonding and debonding of orthodontic brackets. , 1997, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[11]  Zygmunt Wróbel,et al.  Layers Recognition in Tomographic Eye Image Based on Random Contour Analysis , 2009, Computer Recognition Systems 3.

[12]  Daniel Fried,et al.  Remineralization of in vitro dental caries assessed with polarization-sensitive optical coherence tomography. , 2006, Journal of biomedical optics.

[13]  A. Lussi,et al.  Enamel loss and adhesive remnants following bracket removal and various clean-up procedures in vitro. , 2012, European journal of orthodontics.

[14]  Elif Derya Übeyli,et al.  Computer recognition systems , 2009, Expert Syst. J. Knowl. Eng..

[15]  Yasunori Sumi,et al.  Application of optical coherence tomography (OCT) to nondestructive inspection of dentures. , 2011, Archives of gerontology and geriatrics.

[16]  A. Z. Freitas,et al.  Biofilm retention by 3 methods of ligation on orthodontic brackets: a microbiologic and optical coherence tomography analysis. , 2011, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[17]  N. Otsu.  A threshold selection method from gray level histograms , 1979 .

[18]  R. Koprowski,et al.  EPR studies of free radicals decay and survival in gamma irradiated aminoglycoside antibiotics: sisomicin, tobramycin and paromomycin. , 2012, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[19]  Pawel Korus,et al.  Efficient Method for Content Reconstruction With Self-Embedding , 2013, IEEE Transactions on Image Processing.

[20]  Hobin Kang,et al.  Nondestructive Assessment of Early Tooth Demineralization Using Cross-Polarization Optical Coherence Tomography , 2010, IEEE Journal of Selected Topics in Quantum Electronics.

[21]  B. Colston,et al.  Dental OCT. , 1998, Optics express.

[22]  D. Fried,et al.  Near-infrared image-guided laser ablation of dental decay. , 2009, Journal of biomedical optics.

[23]  L L Otis,et al.  Optical coherence tomography: a new imaging technology for dentistry. , 2000, Journal of the American Dental Association.

[24]  F. Watari.  In situ quantitative analysis of etching process of human teeth by atomic force microscopy. , 2005, Journal of electron microscopy.

[25]  Byeong Ha Lee,et al.  Optical approach to the periodontal ligament under orthodontic tooth movement: a preliminary study with optical coherence tomography. , 2009, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[26]  Alexander Wong,et al.  Intra-retinal layer segmentation in optical coherence tomography images. , 2009, Optics express.

[27]  A. Karaman,et al.  Effect of self-etching primers on bond strength--are they reliable? , 2009, The Angle orthodontist.

[28]  D. Fried,et al.  High contrast near‐infrared polarized reflectance images of demineralization on tooth buccal and occlusal surfaces at λ = 1310‐nm , 2009, Lasers in surgery and medicine.

[29]  S. Marchionni,et al.  Evaluation of enamel surfaces after bracket debonding: an in-vivo study with scanning electron microscopy. , 2011, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[30]  Zygmunt Wróbel,et al.  Identification of Layers in a Tomographic Image of an Eye Based on the Canny Edge Detection , 2008, Information Technologies in Biomedicine.

[31]  Adrian Lussi,et al.  Quantification of Dental Erosions in Patients With GERD Using Optical Coherence Tomography Before and After Double-Blind, Randomized Treatment With Esomeprazole or Placebo , 2009, The American Journal of Gastroenterology.

[32]  G. Ripandelli,et al.  Optical coherence tomography. , 1998, Seminars in ophthalmology.

[33]  K. Jandt,et al.  Influence of soft drinks on the thickness and morphology of in situ acquired pellicle layer on enamel. , 2002, Journal of colloid and interface science.

[34]  Daniel Fried,et al.  Automated analysis of lesion depth and integrated reflectivity in PS‐OCT scans of tooth demineralization , 2010, Lasers in surgery and medicine.

[35]  P. Moreno,et al.  Ultrashort pulsed laser conditioning of human enamel: in vitro study of the influence of geometrical processing parameters on shear bond strength of orthodontic brackets , 2015, Lasers in Medical Science.

[36]  J. Warren,et al.  Comparison of bonding time and shear bond strength between a conventional and a new integrated bonding system. , 2009, The Angle orthodontist.

[37]  T. Hayakawa,et al.  Effect of using self-etching primer for bonding orthodontic brackets. , 2002, The Angle orthodontist.

[38]  Gábor Márk Somfai,et al.  Early detection of retinal thickness changes in diabetes using Optical Coherence Tomography. , 2010, Medical science monitor : international medical journal of experimental and clinical research.

[39]  Daniel Fried,et al.  Early caries imaging and monitoring with near-infrared light. , 2005, Dental clinics of North America.

[40]  Andreas Hoppe,et al.  INVESTIGATION OF A COMBINED TEXTURE AND CONTOUR METHOD FOR SEGMENTATION OF LIGHT MICROSCOPY CELL IMAGES , 2003 .

[41]  Marek R. Ogiela,et al.  Automatic understanding of medical images - new achievements in syntactic analysis of selected medical images , 2002 .

[42]  Robert Koprowski,et al.  Image Processing in Optical Coherence Tomography: Using Matlab , 2011 .