Dual distribution static compensator for three-phase four-wire distribution system

This study proposes a dual three-leg voltage source inverter (VSI)-based distribution static compensator to compensate unbalanced and non-linear loads in three-phase four-wire distribution systems. The proposed topology uses two three-leg inverters having common dc link with single dc capacitor and an additional small rating ac capacitor connected from the negative terminal of VSI to the system neutral. The proposed scheme with associated control algorithm has capability to compensate unbalanced non-linear load and hence makes source current as balanced sinusoidal and at desired power factor. The control algorithm also ensures the proper sharing of reactive, harmonics and unbalanced powers between two VSIs and controls the grid current total harmonic distortion level even in the presence of unbalanced and distorted voltages. The performance of the proposed scheme has been verified using simulation and experimental studies under different voltage conditions and detailed results are presented.

[1]  Bhim Singh,et al.  Implementation of distribution static compensator for power quality enhancement using learning vector quantisation , 2013 .

[2]  Kamal Al-Haddad,et al.  Comprehensive Study of DSTATCOM Configurations , 2014, IEEE Transactions on Industrial Informatics.

[3]  F. Blaabjerg,et al.  Performance Improvement of Shunt Active Power Filter With Dual Parallel Topology , 2007, IEEE Transactions on Power Electronics.

[4]  B. Singh,et al.  A T-Connected Transformer and Three-leg VSC Based DSTATCOM for Power Quality Improvement , 2008, IEEE Transactions on Power Electronics.

[5]  Gun-Woo Moon Predictive current control of distribution static compensator for reactive power compensation , 1999 .

[6]  Arindam Ghosh,et al.  A new approach to load balancing and power factor correction in power distribution system , 2000 .

[7]  Bhim Singh,et al.  Implementation of four-leg distribution static compensator , 2014 .

[8]  Josep M. Guerrero,et al.  Moving Average Filter Based Phase-Locked Loops: Performance Analysis and Design Guidelines , 2014, IEEE Transactions on Power Electronics.

[9]  Ashwin M. Khambadkone,et al.  Reliability Analysis and Cost Optimization of Parallel-Inverter System , 2012, IEEE Transactions on Industrial Electronics.

[10]  M. K. Mishra,et al.  A DSTATCOM Topology With Reduced DC-Link Voltage Rating for Load Compensation With Nonstiff Source , 2012, IEEE Transactions on Power Electronics.

[11]  Hurng-Liahng Jou,et al.  Single-phase inverter-based neutral-current suppressor for attenuating neutral current of three-phase four-wire distribution power system , 2012 .

[12]  Malabika Basu,et al.  Harmonic power compensation capacity of shunt active power filter and its relationship with design parameters , 2014 .

[13]  M. Brenna,et al.  A New Proposal for Power Quality and Custom Power Improvement: OPEN UPQC , 2009, IEEE Transactions on Power Delivery.

[14]  Ivo Barbi,et al.  DSP-Based Control for Parallelism of Three-Phase Voltage Source Inverter , 2013, IEEE Transactions on Industrial Informatics.

[15]  Mahesh K. Mishra,et al.  A Modified Three-Phase Four-Wire UPQC Topology With Reduced DC-Link Voltage Rating , 2013, IEEE Transactions on Industrial Electronics.

[16]  Quoc-Nam Trinh,et al.  An Enhanced Grid Current Compensator for Grid-Connected Distributed Generation Under Nonlinear Loads and Grid Voltage Distortions , 2014, IEEE Transactions on Industrial Electronics.

[17]  Mauricio Aredes,et al.  Analysis and Software Implementation of a Robust Synchronizing PLL Circuit Based on the pq Theory , 2006, IEEE Transactions on Industrial Electronics.

[18]  Avik Bhattacharya,et al.  Parallel-Connected Shunt Hybrid Active Power Filters Operating at Different Switching Frequencies for Improved Performance , 2012, IEEE Transactions on Industrial Electronics.

[19]  Bhim Singh,et al.  Active power filter with sliding mode control , 1997 .

[20]  V.M. Moreno,et al.  Reference current estimation under distorted line voltage for control of shunt active power filters , 2004, IEEE Transactions on Power Electronics.

[21]  A. Ghosh,et al.  Control Schemes for DC Capacitor Voltages Equalization in Diode-Clamped Multilevel Inverter-Based DSTATCOM , 2008, IEEE Transactions on Power Delivery.

[22]  A. Ghosh,et al.  Control Strategies for Load Compensation Using Instantaneous Symmetrical Component Theory Under Different Supply Voltages , 2008, IEEE Transactions on Power Delivery.

[23]  Mahesh Kumar Mishra,et al.  DC Capacitor Voltage Equalization in Neutral Clamped Inverters for DSTATCOM Application , 2010, IEEE Transactions on Industrial Electronics.

[24]  B. Singh,et al.  Reduced Rating VSC With a Zig-Zag Transformer for Current Compensation in a Three-Phase Four-Wire Distribution System , 2009, IEEE Transactions on Power Delivery.