Performance improvement of air-breathing proton exchange membrane fuel cell (PEMFC) with a condensing-tower-like curved flow field

[1]  Y. Tolmachev,et al.  Effect of the corrugated bipolar plate design on the self‐humidification of a high power density PEMFC stack for UAVs , 2021, Fuel Cells.

[2]  Zhongyuan Yuan,et al.  Model Predictive Control with Adaptive Building Model for Heating Using the Hybrid Air-Conditioning System in a Railway Station , 2021, Energies.

[3]  Linfa Peng,et al.  Towards mass applications: A review on the challenges and developments in metallic bipolar plates for PEMFC , 2020, Progress in Natural Science: Materials International.

[4]  Peng Wang,et al.  Cooling performance of cylinder-frustum natural draft dry cooling tower , 2020 .

[5]  Krishnan Suresh,et al.  Generalizations of non-uniform rational B-splines via decoupling of the weights: theory, software and applications , 2019, Engineering with Computers.

[6]  Jie Zhang,et al.  Sealing performance and mechanical behavior of PEMFCs sealing system based on thermodynamic coupling , 2020 .

[7]  Wei Liu,et al.  Optimal design of cathode flow channel for air-cooled PEMFC with open cathode , 2020 .

[8]  Linfa Peng,et al.  Numerical analysis of air-cooled proton exchange membrane fuel cells with various cathode flow channels , 2020 .

[9]  Sachin Chugh,et al.  Experimental and modelling studies of low temperature PEMFC performance , 2020, International Journal of Hydrogen Energy.

[10]  Shihua Liu,et al.  Numerical simulation and experimental study on the effect of symmetric and asymmetric bionic flow channels on PEMFC performance under gravity , 2019, International Journal of Hydrogen Energy.

[11]  X. Zhuang,et al.  Experimental and numerical investigation on effects of cathode flow field configurations in an air-breathing high-temperature PEMFC , 2019, International Journal of Hydrogen Energy.

[12]  B. Yi,et al.  Effect of electrode Pt-loading and cathode flow-field plate type on the degradation of PEMFC , 2019, Journal of Energy Chemistry.

[13]  B. Sundén,et al.  A parametric comparison of temperature uniformity and energy performance of a PEMFC having serpentine wavy channels , 2018, International Journal of Energy Research.

[14]  T. Lei,et al.  Development of Ti bipolar plates with carbon/PTFE/TiN composites coating for PEMFCs , 2018, International Journal of Hydrogen Energy.

[15]  A. Ranjbar,et al.  Numerical simulation based design for an innovative PEMFC cooling flow field with metallic bipolar plates , 2018, Applied Energy.

[16]  Z. Yuan,et al.  The effect of gravity on inner transport and cell performance in passive micro direct methanol fuel cell , 2018 .

[17]  A. Vimala Juliet,et al.  Comparative analysis of 2D and 3D model of a PEMFC in COMSOL , 2017 .

[18]  Qingwen Li,et al.  Flexible and Lightweight Fuel Cell with High Specific Power Density. , 2017, ACS nano.

[19]  Mansoo Choi,et al.  A rollable ultra-light polymer electrolyte membrane fuel cell , 2017 .

[20]  Ramin Roshandel,et al.  Power density optimization of PEMFC cathode with non-uniform catalyst layer by Simplex method and numerical simulation , 2016 .

[21]  Denise A. McKahn,et al.  Influence of gas channel depth in self-humidified miniature PEM fuel cells with dead-ended anode , 2015 .

[22]  Eusebio Valero,et al.  Volumetric b-splines shape parametrization for aerodynamic shape design , 2014 .

[23]  Cody Squibb,et al.  Evaluation of fin structure effects on a heated air-breathing polymer electrolyte membrane (PEM) fuel cell , 2013 .

[24]  P. Manoj Kumar,et al.  A passive method of water management for an air-breathing proton exchange membrane fuel cell , 2013 .

[25]  Cody Squibb,et al.  Experimental Evaluation of Cell Temperature Effects on Miniature, Air-Breathing PEM Fuel Cells , 2011 .

[26]  C. Wen,et al.  Thermal management of a proton exchange membrane fuel cell stack with pyrolytic graphite sheets and , 2011 .

[27]  Narissara Bussayajarn,et al.  Planar air breathing PEMFC with self-humidifying MEA and open cathode geometry design for portable applications , 2009 .

[28]  Christopher Hebling,et al.  Experimental and numerical studies of portable PEMFC stack , 2009 .

[29]  Sunhoe Kim,et al.  Effects of humidity and temperature on a proton exchange membrane fuel cell (PEMFC) stack , 2008 .

[30]  Fritz B. Prinz,et al.  Engineering model of a passive planar air breathing fuel cell cathode , 2007 .

[31]  Xiao-dong Wang,et al.  Performance study on a stepped flow field design for bipolar plate in PEMFC , 2021 .

[32]  Jihoon Chung,et al.  Stack/flutter-driven self-retracting triboelectric nanogenerator for portable electronics , 2017 .