A hybrid approach for fault tolerance in robotics

This paper studies the difference between the human behaviours for fault tolerance with a pseudo inverse reconfiguration approach for fault tolerance of robotic arms. If this difference is well understood then it can be used to introduce a hybrid approach for fault tolerant motion of robotic arms. The proposed approach is expected to combine human fault-tolerance dexterity and advantages of a model based fault tolerance. The main aim is to add human dexterity for fault tolerance of robotic arms.

[1]  Hongrui Wang,et al.  Passive Fault Tolerant Robotic Control Based on Fuzzy Rules against Actuator Constraints , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[2]  Saeid Nahavandi,et al.  Minimal force jump within human and assistive robot cooperation , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[3]  Sabri Tosunoglu,et al.  Kinematic and Structural Design Assessment of Fault-Tolerant Manipulators , 1998, Intell. Autom. Soft Comput..

[4]  R. Tinos,et al.  Fault detection and isolation in cooperative manipulators via artificial neural networks , 2001, Proceedings of the 2001 IEEE International Conference on Control Applications (CCA'01) (Cat. No.01CH37204).

[5]  Anthony A. Maciejewski,et al.  Failure tolerant teleoperation of a kinematically redundant manipulator: an experimental study , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[6]  S. Soylu,et al.  A Fault-Tolerant Fuzzy-Logic Based Redundancy Resolution Method for Underwater Mobile Manipulators , 2007, OCEANS 2007.

[7]  G. Giralt,et al.  Safe and dependable physical human-robot interaction in anthropic domains: State of the art and challenges , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  Ian D. Walker,et al.  A time-delayed observer for fault detection and isolation in industrial robots , 2006, Robotica.

[9]  Saeid Nahavandi,et al.  Optimal actuator fault tolerance for static nonlinear systems based on minimum output velocity jump , 2010, The 2010 IEEE International Conference on Information and Automation.

[10]  Saeid Nahavandi,et al.  Task completion with partially-failed manipulators , 2010, 2010 IEEE Conference on Robotics, Automation and Mechatronics.

[11]  Saeid Nahavandi,et al.  Designing optimal fault tolerant Jacobian for robotic manipulators , 2010, 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[12]  Anthony A. Maciejewski.  Fault tolerant properties of kinematically redundant manipulators , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[13]  Li Huang,et al.  On the design of fault tolerant parallel manipulators , 2003 .

[14]  J. E. McInroy,et al.  Precise, fault-tolerant pointing using a Stewart platform , 1999 .

[15]  Saeid Nahavandi,et al.  On the effort of task completion for partially-failed manipulators , 2010, 2010 8th IEEE International Conference on Industrial Informatics.

[16]  Yixin Chen,et al.  Optimal, fault-tolerant mappings to achieve secondary goals without compromising primary performance , 2003, IEEE Trans. Robotics Autom..

[17]  Saeid Nahavandi,et al.  Fault tolerance force for redundant manipulators , 2010, 2010 2nd International Conference on Advanced Computer Control.

[18]  Jung-Min Yang.  Gait synthesis for hexapod robots with a locked joint failure , 2005, Robotica.

[19]  Zhao Jing,et al.  On the joint velocity jump during fault tolerant operations for manipulators with multiple degrees of redundancy , 2009 .

[20]  Qing Song,et al.  Robust Adaptive Dead Zone Technology for Fault-Tolerant Control of Robot Manipulators Using Neural Networks , 2002, J. Intell. Robotic Syst..

[21]  Anthony A. Maciejewski,et al.  On the implementation of velocity control for kinematically redundant manipulators , 2000, IEEE Trans. Syst. Man Cybern. Part A.

[22]  Myron A. Diftler,et al.  A fault tolerant joint drive system for the Space Shuttle remote manipulator system , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[23]  M. Jamshidi,et al.  Robot manipulator control for hazardous waste-handling applications , 1992, J. Field Robotics.

[24]  Saeid Nahavandi,et al.  Joint velocity redistribution for fault tolerant manipulators , 2010, 2010 IEEE Conference on Robotics, Automation and Mechatronics.

[25]  Leila Notash.  Joint sensor fault detection for fault tolerant parallel manipulators , 2000 .

[26]  Joseph R. Cavallaro,et al.  Analysis of robots for hazardous environments , 1997, Annual Reliability and Maintainability Symposium.

[27]  Peter I. Corke,et al.  A robotics toolbox for MATLAB , 1996, IEEE Robotics Autom. Mag..