Damage identification of structures with uncertain frequency and mode shape data

A statistical method with combined uncertain frequency and mode shape data for structural damage identification is proposed. By comparing the measured vibration data before damage or analytical finite element model of the intact structure with those measured after damage, the finite element model is updated so that its vibration characteristic changes are equal to the changes in the measured data as closely as possible. The effects of uncertainties in both the measured vibration data and finite element model are considered as random variables in model updating. The statistical variations of the updated finite element model are derived with perturbation method and Monte Carlo technique. The probabilities of damage existence in the structural members are then defined. The proposed method is applied to a laboratory tested steel cantilever beam and frame structure. The results show that all the damages are identified correctly with high probabilities of damage existence. Discussions are also made on the applicability of the method when no measurement data of intact structure are available. Copyright © 2002 John Wiley & Sons, Ltd.

[1]  Hong Hao,et al.  MEASUREMENT SELECTION FOR VIBRATION-BASED STRUCTURAL DAMAGE IDENTIFICATION , 2000 .

[2]  Pei-Ling Liu,et al.  Identification and Damage Detection of Trusses Using Modal Data , 1995 .

[3]  J. D. Collins,et al.  Statistical Identification of Structures , 1973 .

[4]  R. B. Testa,et al.  Modal Analysis for Damage Detection in Structures , 1991 .

[5]  Charles R. Farrar,et al.  Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review , 1996 .

[6]  John E. Mottershead,et al.  Finite Element Model Updating in Structural Dynamics , 1995 .

[7]  Brian Schwarz,et al.  Experimental modal analysis , 1999 .

[8]  Ephrahim Garcia,et al.  Structural Damage Identification: A Probabilistic Approach , 1998 .

[9]  Michał Kleiber,et al.  The Stochastic Finite Element Method: Basic Perturbation Technique and Computer Implementation , 1993 .

[10]  James M. Ricles,et al.  Damage detection in elastic structures using vibratory residual forces and weighted sensitivity , 1992 .

[11]  Tai-Yan Kam,et al.  DETECTION OF CRACKS IN STRUCTURES USING MODAL TEST DATA , 1992 .

[12]  G. D. Jeong,et al.  Identification of Stiffness Reductions Using Natural Frequencies , 1995 .

[13]  Donald Grant Collins,et al.  Laminar Viscous-Inviscid Interactions at Transonic Speeds , 1974 .

[14]  Robert D. Adams,et al.  The location of defects in structures from measurements of natural frequencies , 1979 .

[15]  Arun Kumar Pandey,et al.  Damage detection from changes in curvature mode shapes , 1991 .

[16]  Ahmet E. Aktan,et al.  MODAL TESTING FOR STRUCTURAL IDENTIFICATION AND CONDITION ASSESSMENT OF CONSTRUCTED FACILITIES , 2001 .

[17]  Seamus D. Garvey,et al.  Parameter subset selection in damage location , 1997 .

[18]  Mohamed Kaouk,et al.  Structural damage assessment using a generalized minimum rank perturbation theory , 1993 .

[19]  R. Fox,et al.  Rates of change of eigenvalues and eigenvectors. , 1968 .

[20]  A. K. Pandey,et al.  Damage Detection in Structures Using Changes in Flexibility , 1994 .