The Role of the In-Cylinder Gas Temperature and Oxygen Concentration over Low Load RCCI Combustion Efficiency

Several studies carried out with the aim of improving the RCCI concept in terms of thermal efficiency conclude that the main cause of the reduced efficiency at light loads is the reduced combustion efficiency. The present study used both a 3D computational model and engine experiments to explore the effect of the oxygen concentration and intake temperature on RCCI combustion efficiency at light load. The experiments were conducted using a single-cylinder heavy-duty research diesel engine adapted for dual fuel operation. Results suggest that it is possible to achieve an improvement of around 1.5% in the combustion efficiency with both strategies studied; the combined effect of intake temperature and in-cylinder fuel blending as well as the combined effect of oxygen concentration and incylinder fuel blending (ICFB). In addition, the direct comparison of both strategies suggests that the combustion losses trend is mainly associated to the in-cylinder equivalence ratio stratification, which is determined by the diesel to gasoline ratio in the blend since the injection timing is kept constant for all the tests. Moreover, the combined effect of the intake temperature and ICFB promotes a slight improvement in the combustion losses over the combined effect of the oxygen concentration and ICFB.

[1]  Avinash Kumar Agarwal,et al.  Combustion characteristics of diesel HCCI engine: An experimental investigation using external mixture formation technique , 2012 .

[2]  H. Hiroyasu,et al.  Models for combustion and formation of nitric oxide and soot in direct injection diesel engines. SAE Paper 760129 , 1976 .

[3]  Yannis Hardalupas,et al.  Some advantages and challenges of running a Euro IV, V6 diesel engine on a gasoline fuel , 2013 .

[4]  R. Kiplimo,et al.  Effects of spray impingement, injection parameters, and EGR on the combustion and emission characteristics of a PCCI diesel engine , 2012 .

[5]  Octavio Armas,et al.  Influence of measurement errors and estimated parameters on combustion diagnosis , 2006 .

[6]  D. Splitter,et al.  Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending , 2009 .

[7]  D. Splitter,et al.  Fuel reactivity controlled compression ignition (RCCI): a pathway to controlled high-efficiency clean combustion , 2011 .

[8]  Bengt Johansson,et al.  Extending the Operating Region of Multi-Cylinder Partially Premixed Combustion using High Octane Number Fuel , 2011 .

[9]  Bengt Johansson,et al.  HCCI Combustion Phasing in a Multi Cylinder Engine Using Variable Compression Ratio , 2002 .

[10]  Bengt Johansson,et al.  Demonstrating the Multi Fuel Capability of a Homogeneous Charge Compression Ignition Engine with Variable Compression Ratio , 1999 .

[11]  Mingfa Yao,et al.  Progress and recent trends in homogeneous charge compression ignition (HCCI) engines , 2009 .

[12]  Jialin Yang,et al.  Development of a Gasoline Engine System Using HCCI Technology - The Concept and the Test Results , 2002 .

[13]  Rolf D. Reitz,et al.  An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine , 2010 .

[14]  S M Aceves,et al.  A fully coupled computational fluid dynamics and multi-zone model with detailed chemical kinetics for the simulation of premixed charge compression ignition engines , 2005 .

[15]  Zhi Wang,et al.  Comparative study on Gasoline Homogeneous Charge Induced Ignition (HCII) by diesel and Gasoline/Diesel Blend Fuels (GDBF) combustion , 2013 .

[16]  Zhen Huang,et al.  Fuel design and management for the control of advanced compression-ignition combustion modes , 2011 .

[17]  Hans-Erik Ångström,et al.  Integrated Simulation and Engine Test of Closed Loop HCCI Control by aid of Variable Valve Timings , 2003 .

[18]  Rolf D. Reitz,et al.  Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions , 2009 .

[19]  Rolf D. Reitz,et al.  The application of a multicomponent droplet vaporization model to gasoline direct injection engines , 2003 .

[20]  Hans-Erik Ångström,et al.  Advantages of Fuels with High Resistance to Auto-ignition in Late-injection, Low-temperature, Compression Ignition Combustion , 2006 .

[21]  R. Reitz,et al.  A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuels , 2008 .

[22]  J. Eng,et al.  Characterization of Pressure Waves in HCCI Combustion , 2002 .

[23]  D. Splitter,et al.  Fuel Reactivity Controlled Compression Ignition (RCCI) Combustion in Light- and Heavy-Duty Engines , 2011 .

[24]  Mingfa Yao,et al.  Effects of Inlet Pressure and Octane Numbers on Combustion and Emissions of a Homogeneous Charge Compression Ignition (HCCI) Engine , 2008 .

[25]  John E. Dec,et al.  Boosted HCCI for high power without engine knock and with ultra-low NOx emissions - Using conventional gasoline , 2010 .

[26]  Hakan Serhad Soyhan,et al.  Thermal analysis of a combustion chamber surrounded by deposits in an HCCI engine , 2013 .

[27]  R. Reitz,et al.  A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling , 1997 .

[28]  P. K. Senecal,et al.  A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations , 2007 .

[29]  Gautam Kalghatgi,et al.  Auto-Ignition Quality of Practical Fuels and Implications for Fuel Requirements of Future SI and HCCI Engines , 2005 .

[30]  Rakesh Kumar Maurya,et al.  Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine , 2011 .

[31]  C. H. Schleyer,et al.  Effects of Fuel Property Changes on Heavy-Duty HCCI Combustion , 2007 .

[32]  Song-Charng Kong,et al.  Modeling diesel spray flame lift-off, sooting tendency and NOx emissions using detailed chemistry , 2005 .

[33]  Rolf D. Reitz,et al.  Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine , 2007 .

[34]  Rolf D. Reitz,et al.  Effect of Compression Ratio and Piston Geometry on RCCI Load Limits and Efficiency , 2012 .

[35]  Rolf D. Reitz,et al.  An Optical Investigation of Ignition Processes in Fuel Reactivity Controlled PCCI Combustion , 2010 .

[36]  Hans-Erik Ångström,et al.  Partially pre-mixed auto-ignition of gasoline to attain low smoke and low NOx at high load in a compression ignition engine and comparison with a diesel fuel , 2007 .

[37]  O. Armas,et al.  Diagnosis of DI Diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas , 1999 .

[38]  Horng-Wen Wu,et al.  Reduction of smoke and nitrogen oxides of a partial HCCI engine using premixed gasoline and ethanol with air , 2011 .

[39]  Rakesh Kumar Maurya,et al.  Experimental investigation on the effect of intake air temperature and air-fuel ratio on cycle-to-cycle variations of HCCI combustion and performance parameters , 2011 .

[40]  J. Dukowicz.  A particle-fluid numerical model for liquid sprays , 1980 .

[41]  Gary Kirkpatrick,et al.  Controlled Combustion in an IC-Engine with a Fully Variable Valve Train , 2001 .