Design and performance evaluation of polyvinyl alcohol/polyimide coated optical fibre grating-based humidity sensors.

Optical fibre grating based sensors make a significant contribution to relative humidity measurement for various applications and a number of different designs and sensor configurations have been produced and discussed in the literature. Recent developments have included using sensitive polymers and indeed other materials that experience a variation of their physical and optical properties as a result of the absorption of moisture and which thus creates a modification of the characteristic spectral features of the gratings used. The strain and the effective refractive index of the gratings are affected by the change induced by the polymer and these effects were calibrated against the relative humidity variations that initially induce variations in the polymer layer. In this work, an evaluation is made of the performance characteristics of two different moisture sensitive polymers, i.e., polyimide and polyvinyl alcohol, as the basis of such sensors, while at the same time using different types of fibre gratings i.e., fibre Bragg gratings and long period gratings. Their performance is discussed in light of the operation of similar types of polymer-coated and other grating based sensors reported in the literature.

[1]  Shufang Luo,et al.  Applications of LPG fiber optical sensors for relative humidity and chemical-warfare-agents monitoring , 2002, SPIE/COS Photonics Asia.

[2]  John E. Sipe,et al.  Long-period fiber gratings as band-rejection filters , 1995 .

[3]  Kenneth T. V. Grattan,et al.  Fibre optic long period grating-based humidity sensor probe using a Michelson interferometric arrangement , 2013 .

[4]  Min Zhang,et al.  Long-Period Grating Relative Humidity Sensor With Hydrogel Coating , 2007, IEEE Photonics Technology Letters.

[5]  Hao Zhang,et al.  Relative Humidity Sensor Based on Tilted Fiber Bragg Grating With Polyvinyl Alcohol Coating , 2009 .

[6]  Kenneth T. V. Grattan,et al.  Polymer-coated fiber Bragg grating for relative humidity sensing , 2005 .

[7]  S. Pispas,et al.  Optical fiber long-period grating humidity sensor with poly(ethylene oxide)/cobalt chloride coating. , 2006, Applied optics.

[8]  T. L. Yeo,et al.  LPG-Based PVA Coated Sensor for Relative Humidity Measurement , 2007, IEEE Sensors Journal.

[9]  Harianto Rahardjo,et al.  High relative humidity measurements using gelatin coated long-period grating sensors , 2005 .

[10]  L. Alwis,et al.  Analysis of Polyimide-Coated Optical Fiber Long-Period Grating-Based Relative Humidity Sensor , 2013, IEEE Sensors Journal.

[11]  I. R. Matías,et al.  Humidity sensor based on a long-period fiber grating coated with a hydrophobic thin film , 2010, European Workshop on Optical Fibre Sensors.

[12]  Xiujuan Yu,et al.  Optical fiber relative humidity sensor based on a hydrogel coated long period grating , 2011, International Conference on Optical Instruments and Technology.

[13]  Tong Sun,et al.  Strain Measurement Using Embedded Fiber Bragg Grating Sensors Inside an Anchored Carbon Fiber Polymer Reinforcement Prestressing Rod for Structural Monitoring , 2009, IEEE Sensors Journal.

[14]  S. Buontempo,et al.  Radiation hard humidity sensors for high energy physics applications using polymide-coated Fiber Bragg Gratings sensors , 2011, 2011 IEEE SENSORS Proceedings.

[15]  Kefa Cen,et al.  Low-cost relative humidity sensor based on thermoplastic polyimide-coated fiber Bragg grating , 2007 .

[16]  K. Hill,et al.  Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication , 1978 .

[17]  Ignacio R. Matias,et al.  A fibre optic humidity sensor based on a long-period fibre grating coated with a thin film of SiO2 nanospheres , 2009 .

[18]  T. L. Yeo,et al.  Fibre-optic sensor technologies for humidity and moisture measurement , 2008 .

[19]  J. L. Santos,et al.  Simultaneous Measurement of Humidity and Temperature Based on an SiO$_{2}$ -Nanospheres Film Deposited on a Long-Period Grating In-Line With a Fiber Bragg Grating , 2011, IEEE Sensors Journal.

[20]  Kenneth T. V. Grattan,et al.  Demonstration of a fibre-optic sensing technique for the measurement of moisture absorption in concrete , 2006 .