Self-calibration of a general hexapod manipulator using cylinder constraints

[1]  C. Lawson,et al.  Solving least squares problems , 1976, Classics in applied mathematics.

[2]  Louis J. Everett,et al.  Forward Calibration of Closed-Loop Jointed Manipulators , 1989, Int. J. Robotics Res..

[3]  Chia-Hsiang Menq,et al.  Identification and Observability Measure of a Basis Set of Error Parameters in Robot Calibration , 1989 .

[4]  John M. Hollerbach,et al.  A survey of kinematic calibration , 1989 .

[5]  Oussama Khatib,et al.  The robotics review 1 , 1989 .

[6]  Zvi S. Roth,et al.  Fundamentals of Manipulator Calibration , 1991 .

[7]  John M. Hollerbach,et al.  Autonomous calibration of single-loop closed kinematic chains formed by manipulators with passive endpoint constraints , 1991, IEEE Trans. Robotics Autom..

[8]  H. Zhuang,et al.  Observability Issues in Kinematic Identification of Manipulators , 1992 .

[9]  Tatsuo Arai,et al.  An implicit loop method for kinematic calibration and its application to closed-chain mechanisms , 1995, IEEE Trans. Robotics Autom..

[10]  John M. Hollerbach,et al.  The noise amplification index for optimal pose selection in robot calibration , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[11]  Lixin Liu,et al.  Self-calibration of a class of parallel manipulators , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[12]  Giovanni Legnani,et al.  Static calibration of industrial manipulators: Design of an optical instrumentation and application to SCARA robots , 1996 .

[13]  John M. Hollerbach,et al.  The Calibration Index and Taxonomy for Robot Kinematic Calibration Methods , 1996, Int. J. Robotics Res..

[14]  John M. Lewis,et al.  Autonomous robot calibration using a trigger probe , 1996, Robotics Auton. Syst..

[15]  Jian Wang,et al.  Kinematic modeling and calibration of a Stewart platform , 1996, Adv. Robotics.

[16]  Hanqi Zhuang,et al.  Self-calibration of parallel mechanisms with a case study on Stewart platforms , 1997, IEEE Trans. Robotics Autom..

[17]  Hanqi Zhuang,et al.  Calibration of stewart platforms and other parallel manipulators by minimizing inverse kinematic residuals , 1998 .

[18]  David Daney.  Self Calibration of Gough Platform using leg mobility constraints , 1999 .

[19]  Wisama Khalil,et al.  Calibration of parallel robots using two inclinometers , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[20]  L. W. Tsai,et al.  Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .

[21]  Wisama Khalil,et al.  Self calibration of Stewart-Gough parallel robots without extra sensors , 1999, IEEE Trans. Robotics Autom..

[22]  Hanqi Zhuang,et al.  Robot calibration with planar constraints , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[23]  Kornel Ehmann,et al.  Calibration of a hexapod machine tool using a redundant leg , 2000 .

[24]  Wisama Khalil,et al.  Identifiable parameters for parallel robots kinematic calibration , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).