Kinematic and Kinetostatic Synthesis of Planar Coupled Serial Chain Mechanisms

Single Degree-of-freedom Coupled Serial Chain (SDCSC) mechanisms form a novel class of modular and compact mechanisms with a single degree-of-freedom, suitable for a number of manipulation tasks. Such SDCSC mechanisms take advantage of the hardware constraints between the articulations of a serial-chain linkage, created using gear-trains or belt/pulley drives, to guide the end-effector motions and forces. In this paper, we examine the dimensional synthesis of such SDCSC mechanisms to perform desired planar manipulation tasks, taking into account task specifications on both end-effector motions and forces. Our solution approach combines precision point synthesis with optimization to realize optimal mechanisms, which satisfy the design specifications exactly at the selected precision points and approximate them in the least-squares sense elsewhere along a specified trajectory. The designed mechanisms can guide a rigid body through several positions while supporting arbitrarily specified external loads. Furthermore, torsional springs are added at the joints to reduce the overall actuation requirements and to enhance the task performance. Examples from the kinematic and the kinetostatic synthesis of planar SDCSC mechanisms are presented to highlight the benefits.

[1]  Vijay Kumar,et al.  Design and virtual prototyping of rehabilitation aids , 1999 .

[2]  Gregory S. Chirikjian,et al.  A modal approach to hyper-redundant manipulator kinematics , 1994, IEEE Trans. Robotics Autom..

[3]  Venkat Narayan Krovi,et al.  Design and virtual prototyping of user-customized assistive devices , 1998 .

[4]  Kenneth J. Waldron,et al.  Synthesis With Mixed Motion and Path Generation Position Specifications , 1983 .

[5]  Lung-Wen Tsai,et al.  Incompletely Specified Displacements: Geometry and Spatial Linkage Synthesis , 1973 .

[6]  George N. Sandor.  On the Existence of a Cycloidal Burmester Theory in Planar Kinematics , 1964 .

[7]  R. E. Kaufman,et al.  Bicycloidal Crank—A New Four-Link Mechanism , 1969 .

[8]  Mark Elling Rosheim.  In the footsteps of Leonardo [articulated anthropomorphic robot] , 1997, IEEE Robotics Autom. Mag..

[9]  Lung-Wen Tsai,et al.  Design of Tendon-Driven Manipulators , 1995 .

[10]  Michael Thomas Scardina.  Optimal synthesis of force-generating planar four-link mechanisms , 1996 .

[11]  F. Freudenstein.  Advanced mechanism design: Analysis and synthesis: Vol. 2, by G. N. Sandor and A. G. Erdman. Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1984, 688 p , 1985 .

[12]  Delbert Tesar,et al.  SYNTHESIS OF SPRING PARAMETERS TO BALANCE GENERAL FORCING FUNCTIONS IN PLANAR MECHANISMS. , 1976 .

[13]  Ferdinand Freudenstein,et al.  Geared Five-Bar Motion: Part I—Gear Ratio Minus One , 1963 .

[14]  Larry L. Howell,et al.  A Loop-Closure Theory for the Analysis and Synthesis of Compliant Mechanisms , 1996 .

[15]  Yoji Umetani,et al.  The Development of Soft Gripper for the Versatile Robot Hand , 1978 .

[16]  Jorge Angeles,et al.  Unconstrained nonlinear least-square optimization of planar linkages for rigid-body guidance , 1990 .

[17]  Xichun Nie,et al.  DETC 2001 / DAC-21087 DESIGN OF PASSIVE RECONFIGURABLE MANIPULATION ASSISTIVE AIDS , 2001 .

[18]  H. Yoshinada,et al.  Design and experiments for a coupled tendon-driven manipulator , 1993, IEEE Control Systems.

[19]  Bernard Roth,et al.  Kinematic Geometry Associated With the Least-Square Approximation of a Given Motion , 1973 .

[20]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[21]  D. A. Streit,et al.  Elastic Potential Synthesis—A Generalized Procedure for Dynamic Synthesis of Machine and Mechanism Systems , 1993 .

[22]  Bernard Roth,et al.  Dimensional Synthesis of Closed-Loop Linkages to Match Force and Position Specifications , 1993 .

[23]  J. Michael McCarthy,et al.  The design and control of a robot finger for tactile sensing , 1988, J. Field Robotics.