Design of a Monolithic Double-Slider Based Compliant Gripper with Large Displacement and Anti-Buckling Ability

In a micro-manipulation system, the compliant gripper is used for gripping, handling and assembling of objects. Large displacement and anti-buckling characteristics are desired in the design of the gripper. In this paper, a compliant gripper with these two characteristics is proposed, modelled and verified. The large displacement is enabled by using distributed compliance in a double-slider kinematic mechanism. An inverted flexure arrangement enables the anti-buckling of the gripper when closing the two jaws. A pseudo-rigid-body model (PRBM) method with the help of virtual work principle is employed to obtain several desired analytical relations including the amplification coefficient and kinetostatics. The results of the finite element analysis (FEA) are shown to be consistent with the results of the derived analytical model. An experimental test was carried out through a milling machined aluminium alloy prototype, the results of which verify the good performance of the compliant gripper.

[1]  Wenjie Chen,et al.  Design of a flexure-based gripper used in optical fiber handling , 2004, RAM.

[2]  Guangbo Hao.  Creative design and modelling of large-range translation compliant parallel manipulators , 2011 .

[3]  Chao-Chieh Lan,et al.  A Constant-Force Compliant Gripper for Handling Objects of Various Sizes , 2014 .

[4]  Justus Laurens Herder,et al.  Design of a statically balanced fully compliant grasper , 2015 .

[5]  Yanling Tian,et al.  Design of a Piezoelectric-Actuated Microgripper With a Three-Stage Flexure-Based Amplification , 2015, IEEE/ASME Transactions on Mechatronics.

[6]  Guangbo Hao,et al.  Design and static testing of a compact distributed-compliance gripper based on flexure motion , 2016 .

[7]  Larry L. Howell,et al.  Handbook of compliant mechanisms , 2013 .

[8]  Gil Ho Yoon,et al.  Constraint force design method for topology optimization of planar rigid-body mechanisms , 2012, Comput. Aided Des..

[9]  Wei Chen,et al.  Level set based robust shape and topology optimization under random field uncertainties , 2010, DAC 2009.

[10]  Robert Lewis Reuben,et al.  Micro-tweezers: design, fabrication, simulation and testing of a pneumatically actuated micro-gripper for micromanipulation and microtactile sensing , 2015 .

[11]  Bijan Shirinzadeh,et al.  A new design of piezoelectric driven compliant-based microgripper for micromanipulation , 2009 .

[12]  Oliver Brock,et al.  A compliant hand based on a novel pneumatic actuator , 2013, 2013 IEEE International Conference on Robotics and Automation.

[13]  Mohsen Hamedi,et al.  Simulation and experimental investigation of a novel electrostatic microgripper system , 2012 .

[14]  Yu Sun,et al.  Nanonewton force-controlled manipulation of biological cells using a monolithic MEMS microgripper with two-axis force feedback , 2008 .

[15]  Yulong Zhang,et al.  Design and Control of a Novel Compliant Constant-Force Gripper Based on Buckled Fixed-Guided Beams , 2017, IEEE/ASME Transactions on Mechatronics.

[16]  Q. Yang,et al.  A Monolithic Compliant Piezoelectric-Driven Microgripper: Design, Modeling, and Testing , 2013, IEEE/ASME Transactions on Mechatronics.

[17]  Yangmin Li,et al.  Design and analysis of a novel micro-gripper with completely parallel movement of gripping arms , 2011, 2011 6th IEEE Conference on Industrial Electronics and Applications.

[18]  Qingsong Xu,et al.  New Structural Design of a Compliant Gripper Based on the Scott-Russell Mechanism , 2014 .

[19]  Yu Sun,et al.  Autonomous Robotic Pick-and-Place of Microobjects , 2010, IEEE Transactions on Robotics.

[20]  Sameh H Tawfick,et al.  Compliant microgripper with parallel straight-line jaw trajectory for nanostructure manipulation , 2011 .

[21]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .