Evaluation of circuit styles and VLSI logic designs of pentacene OTFTs

Organic electronics have immense potential over a wide spectrum of applications. In the present scenario, an abundance of investigations are being followed on the transistor operation and its characterization. However, circuit level research focus is not that common. Therefore, we sensed the urgency to provide a complete assessment of the different circuit styles, which are, the diode-load, zero-Vgs, pseudo-E and pseudo-D, in ratioless and ratioed logic. A comparative evaluation of the collective circuit behavior of each design style is critical. The major parameters, such as, power consumption, noise margin of high and low level signal, circuit speed, on current and output voltage swing were measured and thereupon, analyzed to decide upon the optimum circuit style for cascading. The inverter, NAND and NOR logic gates, and a 5-inverter ring oscillator were further analyzed, using the pentacene OTFT model file, to realize the best architecture for integration in large scale circuits. Based on our evaluations, the lowest power consumption was in case of the zero-Vgs and pseudo-D design style, along with, a fast circuit operation speed. The pseudo-D circuit configuration, not only provides the maximum Vout swing, but it has the best performance.

[1]  Nikhil Satyala,et al.  Simulation and transient analysis of organic/inorganic CMOS inverter circuit , 2009, 2009 41st Southeastern Symposium on System Theory.

[2]  Erik van Veenendaal,et al.  A 13.56-MHz RFID System Based on Organic Transponders , 2006, IEEE Journal of Solid-State Circuits.

[3]  Eugenio Cantatore,et al.  Increasing the noise margin in organic circuits using dual gate field-effect transistors , 2008 .

[4]  Wim Dehaene,et al.  Robust digital design in organic electronics by dual-gate technology , 2010, 2010 IEEE International Solid-State Circuits Conference - (ISSCC).

[5]  V. Bulovic,et al.  Dual threshold voltage integrated organic technology for ultralow-power circuits , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[6]  T. Sakurai,et al.  Cut-and-paste customization of organic FET integrated circuit and its application to electronic artificial skin , 2005, IEEE Journal of Solid-State Circuits.

[7]  C. D. Sheraw,et al.  Organic thin-film transistor-driven polymer-dispersed liquid crystal displays on flexible polymeric substrates , 2002 .

[8]  Deepak,et al.  Effect of pentacene thickness on organic thin film transistors: Role of pentacene/insulator interface , 2007, 2007 International Workshop on Physics of Semiconductor Devices.

[9]  Kwang-Ting Cheng,et al.  Pseudo-CMOS: A novel design style for flexible electronics , 2010, 2010 Design, Automation & Test in Europe Conference & Exhibition (DATE 2010).

[10]  Kwang-Ting Cheng,et al.  Design for Low Power and Reliable Flexible Electronics: Self-Tunable Cell-Library Design , 2009, Journal of Display Technology.

[11]  Zhenan Bao,et al.  Material and device considerations for organic thin-film transistor sensors , 2009 .

[12]  Yung-Hui Yeh,et al.  Pseudo-CMOS: A Design Style for Low-Cost and Robust Flexible Electronics , 2011, IEEE Transactions on Electron Devices.

[13]  V. Subramanian,et al.  Printed Electronic Nose Vapor Sensors for Consumer Product Monitoring , 2006, 2006 IEEE International Solid State Circuits Conference - Digest of Technical Papers.

[14]  Christopher Pearson,et al.  Bootstrapped inverter using a pentacene thin-film transistor with a poly(methyl methacrylate) gate dielectric , 2009, IET Circuits Devices Syst..

[15]  Zhenan Bao,et al.  Full-Swing and High-Gain Pentacene Logic Circuits on Plastic Substrate , 2010, IEEE Electron Device Letters.

[16]  Jung Wook Lim,et al.  Novel organic inverters with dual-gate pentacene thin-film transistor , 2007 .

[17]  S. Kwon,et al.  62.4: Flexible Paper‐Like Display Using Charged Polymer Particles , 2006 .