A review on lubricant condition monitoring information analysis for maintenance decision support

Abstract Lubrication Condition monitoring (LCM) is not only utilized as an early warning system in machinery but also, for fault diagnosis and prognosis under condition-based maintenance (CBM). LCM is considered as an important condition monitoring technique, due to the ample information derived from lubricant testing, which demonstrates an introspective reflection on the condition and state of the machinery and the lubricant. Central to the entire LCM program is the application concept, where information from lubricant analysis is evaluated (for knowledge extraction) and analyzed with a view of generating an output which is interpretable and applicable for maintenance decision support (knowledge application). For robust LCM, varying techniques and approaches are used for extracting, processing and analyzing information for decision support. For this reason, a comprehensive overview of applicative approaches for LCM is necessary, which would aid practitioners to address gaps as far as LCM is concerned in the context of maintenance decision support. However, such an overview, is to the best of our knowledge, lacking in the literature, hence the objective of this review article. This paper systematically reviews recent research trends and development of LCM based approaches applied for maintenance decision support, and specifically, applications in equipment diagnosis and prognosis. To contextualize this concern, an initial review of base oils, additives, sampling and testing as applied for LCM and maintenance decision support is discussed. Moreover, LCM tests and parameters are reviewed and classified under varying categories which include, physiochemical, elemental, contamination and additive analysis. Approaches applicable for analyzing data derived from LCM, here, lubricant analysis for maintenance decision support are also classified into four categories: statistical, model-based, artificial intelligence and hybrid approaches. Possible improvement to enhance the reliability of the judgement derived from the approaches towards maintenance decision support are further discussed. This paper concludes with a brief discussion of plausible future trends of LCM in the context of maintenance decision making. This present study, not only highlights gaps in existing literature, by reviewing approaches applicable for extracting knowledge from LCM data for maintenance decision support, it also reviews the functional and technical aspects of lubrication. This is expected to address gaps in both theory and practice as far as LCM and maintenance decision support are concerned.

[1]  David Valis,et al.  Perspective analysis outcomes of selected tribodiagnostic data used as input for condition based maintenance , 2016, Reliab. Eng. Syst. Saf..

[2]  G. Steinbichler,et al.  Ultrasound-based measurement of liquid-layer thickness: A novel time-domain approach , 2017 .

[3]  P. S. Mukherjee,et al.  Assessment of useful life of lubricants using artificial neural network , 2000 .

[4]  Lin Ma,et al.  Prognostic modelling options for remaining useful life estimation by industry , 2011 .

[5]  Bo-Suk Yang,et al.  Application of relevance vector machine and logistic regression for machine degradation assessment , 2010 .

[6]  Jasna Hrovatin,et al.  On-line detection of incipient trend changes in lubricant parameters , 2015 .

[7]  Dirk Söffker,et al.  Remaining lifetime modeling using State-of-Health estimation , 2017 .

[8]  N. K. Myshkin,et al.  Wear Prediction for Tribosystems Based on Debris Analysis , 2018 .

[9]  Moisés Knochen,et al.  Determination of Zinc-Based Additives in Lubricating Oils by Flow-Injection Analysis with Flame-AAS Detection Exploiting Injection with a Computer-Controlled Syringe , 2005, Journal of automated methods & management in chemistry.

[10]  Chin-Sheng Chen,et al.  Rotor fault diagnosis system based on sGA-based individual neural networks , 2011, Expert Syst. Appl..

[11]  Mohammad Shakeel Laghari,et al.  Building Relationship Network for Machine Analysis from Wear Debris Measurements , 2007 .

[12]  Wei Yuan,et al.  Shape classification of wear particles by image boundary analysis using machine learning algorithms , 2016 .

[13]  Lars-Göran Westerberg,et al.  Modelling and experimental validation of lubricating grease flow , 2016 .

[14]  O. P. Gandhi,et al.  Reliability analysis of engine oil using polygraph approach , 2008 .

[15]  Somchai Wongwises,et al.  Prediction of dynamic viscosity of a hybrid nano-lubricant by an optimal artificial neural network , 2016 .

[16]  David Valis,et al.  Engine residual technical life estimation based on tribo data , 2014 .

[17]  Hidetoshi Shimodaira,et al.  Pvclust: an R package for assessing the uncertainty in hierarchical clustering , 2006, Bioinform..

[18]  J. A. Moreno,et al.  Numerical Simulation of High-Temperature Oxidation of Lubricants Using the Network Method , 2015 .

[19]  Xudong Peng,et al.  Effect of abrasive size on friction and wear characteristics of nitrile butadiene rubber (NBR) in two-body abrasion , 2016 .

[20]  Mridul Gautam,et al.  Effect of diesel soot on lubricant oil viscosity , 2007 .

[21]  M. Al‐Ghouti,et al.  Virgin and recycled engine oil differentiation: a spectroscopic study. , 2009, Journal of environmental management.

[22]  Ashwani Kumar,et al.  Oil condition monitoring for HEMM – a case study , 2016 .

[23]  Boštjan Dolenc,et al.  On-line Oil Monitoring and Diagnosis , 2013 .

[24]  Wenbin Wang,et al.  A model to predict the residual life of aircraft engines based upon oil analysis data , 2005 .

[25]  J. Fall,et al.  Discrimination of base oils and semi-products using principal component analysis and self organizing maps , 2010 .

[26]  Yuji Yamamoto,et al.  Characterization of wear particles and their relations with sliding conditions , 1998 .

[27]  Subhash Sharma.  Applied multivariate techniques , 1995 .

[28]  Fabrice Ville,et al.  On the use of temperature for online condition monitoring of geared systems - A review , 2018 .

[29]  Bent Helge Nystad,et al.  Remaining useful life of natural gas export compressors , 2010 .

[30]  Viliam Makis,et al.  Reliability estimation of a system subject to condition monitoring with two dependent failure modes , 2016 .

[31]  Jiang Zhe,et al.  Lubricating oil conditioning sensors for online machine health monitoring – A review , 2017 .

[32]  Jay Lee,et al.  Degradation Assessment and Fault Modes Classification Using Logistic Regression , 2005 .

[33]  Soumaya Yacout,et al.  Parameter Estimation Methods for Condition-Based Maintenance With Indirect Observations , 2010, IEEE Transactions on Reliability.

[34]  S. Keskin.  Comparison of Several Univariate Normality Tests Regarding Type I Error Rate and Power of the Test in Simulation based Small Samples , 2006 .

[35]  Luigi Arnone,et al.  A Tridimensional CFD Analysis of the Lubrication Circuit of a Non-Road Application Diesel Engine , 2013 .

[36]  L. Pintelon,et al.  A decision tree-based classification framework for used oil analysis applying random forest feature selection , 2018 .

[37]  Gary E. Newell.  Oil analysis cost‐effective machine condition monitoring technique , 1999 .

[38]  Bin Wu,et al.  Time-frequency analysis for ultrasonic measurement of liquid-layer thickness , 2013 .

[39]  Homer Rahnejat,et al.  A combined analytical‐experimental investigation of friction in cylinder liner inserts under mixed and boundary regimes of lubrication , 2017 .

[40]  P. McCullagh.  What is a statistical model , 2002 .

[41]  Hai Jun Wei,et al.  Research of Marine Diesel Engine’s State Prediction Based on Evolutionary Neural Network and Spectrometric Analysis , 2011 .

[42]  David Valis,et al.  Assessment of Off-Line Diagnostic Oil Data with Using Selected Mathematical Tools , 2015 .

[43]  Seungmok Choi,et al.  Effect of Lubricant Oil Properties on the Performance of Gasoline Particulate Filter (GPF) , 2016 .

[44]  Marco S. Reis,et al.  Assessment and Prediction of Lubricant Oil Properties Using Infrared Spectroscopy and Advanced Predictive Analytics , 2017 .

[45]  Noureddine Zerhouni,et al.  A Data-Driven Failure Prognostics Method Based on Mixture of Gaussians Hidden Markov Models , 2012, IEEE Transactions on Reliability.

[46]  Gerasimos Rigatos,et al.  Power transformers’ condition monitoring using neural modeling and the local statistical approach to fault diagnosis , 2016 .

[47]  Romà Tauler,et al.  Study of motor oil adulteration by infrared spectroscopy and chemometrics methods , 2013 .

[48]  Sang Myung Chun,et al.  Simulation of engine life time related with abnormal oil consumption , 2011 .

[49]  Joseph Mathew,et al.  A review on prognostic techniques for non-stationary and non-linear rotating systems , 2015 .

[50]  Zhiyong Lu,et al.  A study of information technology used in oil monitoring , 2005 .

[51]  Jean-Michel Poggi,et al.  Variable selection using random forests , 2010, Pattern Recognit. Lett..

[52]  Manoj Kumar,et al.  Advancement and current status of wear debris analysis for machine condition monitoring: a review , 2013 .

[53]  Wei Cao,et al.  Wear Trend Prediction of Gearbox Based on Oil Monitoring Technology , 2011 .

[54]  David Valis,et al.  Assessment of Engine Deterioration Based on Oil Fe Data , 2012 .

[55]  Jaromir Skuta,et al.  Active vibrations control of journal bearings with the use of piezoactuators , 2013 .

[56]  Tadeusz Mikolajczyk,et al.  Predicting tool life in turning operations using neural networks and image processing , 2018 .

[57]  Zhuguo Li,et al.  Grey target theory based equipment condition monitoring and wear mode recognition , 2006 .

[58]  Zhongxiao Peng,et al.  Wear-Debris Analysis in Expert Systems , 2001 .

[59]  X. L. Feng,et al.  Application of dielectric spectroscopy for engine lubricating oil degradation monitoring , 2011 .

[60]  Eric Bechhoefer,et al.  A survey of lubrication oil condition monitoring, diagnostics and prognostics techniques and systems , 2012 .

[61]  Yan Gao,et al.  An application of DPCA to oil data for CBM modeling , 2006, Eur. J. Oper. Res..

[62]  Eric Bechhoefer,et al.  Lubrication Oil Condition Monitoring and Remaining Useful Life Prediction with Particle Filtering , 2020 .

[63]  Mauro Hugo Mathias,et al.  Wear Particle Classifier System Based on an Artificial Neural Network , 2010 .

[64]  N. Eliaz,et al.  Failure Analysis and Condition Monitoring of an Open-Loop Oil System Using Ferrography , 2009 .

[65]  Wei Chen,et al.  Wear Condition Monitoring and Working Pattern Recognition of Piston Rings and Cylinder Liners Using On-Line Visual Ferrograph , 2014 .

[66]  Jan Lundberg,et al.  Remaining useful life estimation: review , 2014, Int. J. Syst. Assur. Eng. Manag..

[67]  Darko Lovrec,et al.  Enhanced lubricant management to reduce costs and minimise environmental impact , 2014 .

[68]  Massood Z. Atashbar,et al.  On-Line Lubricants Health Condition Monitoring in Gearbox Application , 2013 .

[69]  Thomas Briggs,et al.  The Impact of Lubricant Volatility, Viscosity and Detergent Chemistry on Low Speed Pre-Ignition Behavior , 2017 .

[70]  Athanasios Chasalevris,et al.  A journal bearing with variable geometry for the suppression of vibrations in rotating shafts: Simulation, design, construction and experiment , 2015 .

[71]  M. R. Yakubov,et al.  Concentrations of vanadium and nickel and their ratio in heavy oil asphaltenes , 2016, Petroleum Chemistry.

[72]  Manoj Kumar,et al.  Statistical Hypothesis Testing Of the Increase in Wear Debris Size Parameters and the Deterioration of Oil , 2013 .

[73]  Wenbin Wang,et al.  A case study of condition based maintenance modelling based upon the oil analysis data of marine diesel engines using stochastic filtering , 2012 .

[74]  P. M. Anderson,et al.  Application of the weibull proportional hazards model to aircraft and marine engine failure data , 1987 .

[75]  Morten Henneberg,et al.  A quasi-stationary approach to particle concentration and distribution in gear oil for wear mode estimation , 2015 .

[76]  Mohammad Amer,et al.  Application of chemometrics and FTIR for determination of viscosity index and base number of motor oils. , 2010, Talanta.

[77]  N. Laraqi,et al.  Thermo-hydrodynamic behaviour of a thin lubricant film , 2010, 2010 3rd International Conference on Thermal Issues in Emerging Technologies Theory and Applications.

[78]  Dong-Kye Lee,et al.  Classification and individualization of used engine oils using elemental composition and discriminant analysis. , 2013, Forensic science international.

[79]  Melinda Hodkiewicz,et al.  Classifying machinery condition using oil samples and binary logistic regression , 2015 .

[80]  W. Wang,et al.  Plant residual time modelling based on observed variables in oil samples , 2009, J. Oper. Res. Soc..

[81]  Zhixiong Li,et al.  On-line Condition Monitoring and Remote Fault Diagnosis for Marine Diesel Engines Using Tribological Information , 2013 .

[82]  Dmitry Yu. Murzin,et al.  Technology for rerefining used lube oils applied in Europe: a review , 2013 .

[83]  Noureddine Zerhouni,et al.  Remaining Useful Life Estimation of Critical Components With Application to Bearings , 2012, IEEE Transactions on Reliability.

[84]  James R. Ottewill,et al.  Condition monitoring of gearboxes using synchronously averaged electric motor signals , 2013 .

[85]  Gurpreet Singh Kapur,et al.  Establishing structure–property correlations and classification of base oils using statistical techniques and artificial neural networks , 2004 .

[86]  Bernardo Tormos,et al.  Analytical approach to wear rate determination for internal combustion engine condition monitoring based on oil analysis , 2003 .

[87]  K. E. Spezzaferro.  Applying logistic regression to maintenance data to establish inspection intervals , 1996, Proceedings of 1996 Annual Reliability and Maintainability Symposium.

[88]  Zhongxiao Peng,et al.  Oxidation wear monitoring based on the color extraction of on-line wear debris , 2015 .

[89]  A. AbdulRazak,et al.  Re-refining of used lubricant oil by solvent extraction using central composite design method , 2017, Korean Journal of Chemical Engineering.

[90]  Hong Zhang,et al.  Application of grey modeling method to fitting and forecasting wear trend of marine diesel engines , 2003 .

[91]  Idriss El-Thalji,et al.  A summary of fault modelling and predictive health monitoring of rolling element bearings , 2015 .

[92]  Hong-Bae Jun,et al.  On condition based maintenance policy , 2015, J. Comput. Des. Eng..

[93]  Donghua Zhou,et al.  Remaining useful life estimation - A review on the statistical data driven approaches , 2011, Eur. J. Oper. Res..

[94]  V. M. Makarenko,et al.  On-line monitoring of the viscosity of lubricating oils , 2010 .

[95]  Qunji Xue,et al.  Industrial gear oil — a study of the interaction of antiwear and extreme-pressure additives , 1993 .

[96]  Janina Zięba-Palus,et al.  Differentiation of used motor oils on the basis of their IR spectra with application of cluster analysis , 2001 .

[97]  Oguzhan Alagoz,et al.  Markov Decision Processes: A Tool for Sequential Decision Making under Uncertainty , 2010, Medical decision making : an international journal of the Society for Medical Decision Making.

[98]  R. Aucélio,et al.  The determination of trace metals in lubricating oils by atomic spectrometry , 2007 .

[99]  Wenbin Wang.  Overview of a semi-stochastic filtering approach for residual life estimation with applications in condition based maintenance , 2011 .

[100]  Jo Ameye,et al.  Lubricant Health Monitoring Programs - A Proactive Approach to Increase Equipment Availability , 2005 .

[101]  David Valis,et al.  Failure prediction of diesel engine based on occurrence of selected wear particles in oil , 2015 .

[102]  P. Sas,et al.  The influence of the lubricant film on the stiffness and damping characteristics of a deep groove ball bearing , 2014 .

[103]  R. Dwyer-Joyce.  Predicting the abrasive wear of ball bearings by lubricant debris , 1999 .

[104]  Malcolm H. Monplaisir,et al.  Maintenance Decision Support: Analysing Crankcase Lubricant Condition by Markov Process Modelling , 1994 .

[105]  Asoke K. Nandi,et al.  FAULT DETECTION USING SUPPORT VECTOR MACHINES AND ARTIFICIAL NEURAL NETWORKS, AUGMENTED BY GENETIC ALGORITHMS , 2002 .

[106]  Bengt Klefsjö,et al.  Proportional hazards model: a review , 1994 .

[107]  R. Elayaraja,et al.  Development of Analytical Model for Design of Gerotor Oil Pump and Experimental Validation , 2011 .

[108]  N. A. Khovanova,et al.  Decision tree and random forest models for outcome prediction in antibody incompatible kidney transplantation , 2017, Biomed. Signal Process. Control..

[109]  Joaquín B. Ordieres Meré,et al.  Contaminants analysis in aircraft engine oil and its interpretation for the overhaul of the engine , 2009 .

[110]  Behzad Ghodrati,et al.  Reliability and Operating Environment Based Spare Parts Planning , 2005 .

[111]  Junhong Mao,et al.  Prediction on wear of a spur gearbox by on-line wear debris concentration monitoring , 2015 .

[112]  Shujuan Zhou,et al.  Online machine health prognostics based on modified duration-dependent hidden semi-Markov model and high-order particle filtering , 2018 .

[113]  Dragan Banjevic,et al.  Using principal components in a proportional hazards model with applications in condition-based maintenance , 2006, J. Oper. Res. Soc..

[114]  Wen Jeng Chen.  Rotordynamics and bearing design of turbochargers , 2012 .

[115]  Daming Lin,et al.  A review on machinery diagnostics and prognostics implementing condition-based maintenance , 2006 .

[116]  Stephan Ebersbach.  Artificial intelligent system for integrated wear debris and vibration analysis in machine condition monitoring , 2007 .

[117]  David Valis,et al.  Perspective approach in using anti-oxidation and anti-wear particles from oil to estimate residual technical life of a system , 2018 .

[118]  B. Lang,et al.  Efficient optimization of support vector machine learning parameters for unbalanced datasets , 2006 .

[119]  Bogdan Nedić,et al.  An Experimental Study of the Tribological Characteristics of Engine and Gear Transmission Oils , 2013 .

[120]  Bernardo Tormos,et al.  Fuzzy logic-based expert system for diesel engine oil analysis diagnosis , 2006 .

[121]  David Valis,et al.  Oil additives used as indicator and input for preventive maintenance optimisation , 2015, International Conference on Military Technologies (ICMT) 2015.

[122]  Joaquín B. Ordieres Meré,et al.  Determination of the total acid number (TAN) of used mineral oils in aviation engines by FTIR using regression models , 2017 .

[123]  E. Erwin Klaus,et al.  The Influence of Metals on Sludge Formation , 1982 .

[124]  Janos Gertler,et al.  Fault Detection and Diagnosis , 2008, Encyclopedia of Systems and Control.

[125]  H. Abdi,et al.  Principal component analysis , 2010 .

[126]  L. R. Padovese,et al.  Study of solid contamination in ball bearings through vibration and wear analyses , 2007 .

[127]  Robert B. Randall,et al.  Advanced diagnostic system for piston slap faults in IC engines, based on the non-stationary characteristics of the vibration signals , 2016 .

[128]  Ying Peng,et al.  Current status of machine prognostics in condition-based maintenance: a review , 2010 .

[129]  Wenbin Wang,et al.  A case comparison of a proportional hazards model and a stochastic filter for condition-based maintenance applications using oil-based condition monitoring information , 2008 .

[130]  Roman M. Balabin,et al.  Near-infrared (NIR) spectroscopy for motor oil classification: From discriminant analysis to support vector machines , 2011 .

[131]  Heeyoung Lee,et al.  A scaffolding approach to coreference resolution integrating statistical and rule-based models , 2017, Natural Language Engineering.

[132]  Hsing-Chia Kuo,et al.  Novel Grey Model for Diesel Engine Oil Monitoring , 2006 .

[133]  M. Mukaka,et al.  Statistics corner: A guide to appropriate use of correlation coefficient in medical research. , 2012, Malawi medical journal : the journal of Medical Association of Malawi.

[134]  Chao Xu,et al.  Ultrasonic echo waveshape features extraction based on QPSO-matching pursuit for online wear debris discrimination , 2015 .

[135]  Liv Haselbach,et al.  Coupled oil analysis trending and life-cycle cost analysis for vessel oil-change interval decisions , 2016 .

[136]  David,et al.  A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears , 2007 .

[137]  Quansheng Jiang,et al.  Machinery fault diagnosis using supervised manifold learning , 2009 .

[138]  David Valis,et al.  Approaches in Correlation Analysis and Application on Oil Field Data , 2016 .

[139]  Junhong Mao,et al.  Modeling and experimental investigations on the relationship between wear debris concentration and wear rate in lubrication systems , 2017 .

[140]  Shuangwen Sheng,et al.  Monitoring of Wind Turbine Gearbox Condition through Oil and Wear Debris Analysis: A Full-Scale Testing Perspective , 2016 .

[141]  S. Hoag,et al.  Lubricant-Sensitivity Assessment of SPRESS® B820 by Near-Infrared Spectroscopy: A Comparison of Multivariate Methods. , 2017, Journal of pharmaceutical sciences.

[142]  Saurabh Kumar,et al.  Online condition monitoring of engine oil , 2005 .

[143]  B. Jakoby,et al.  Viscosity sensors for engine oil condition monitoring—Application and interpretation of results , 2005 .

[144]  Sze-jung Wu,et al.  A Neural Network Integrated Decision Support System for Condition-Based Optimal Predictive Maintenance Policy , 2007, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans.

[145]  Dimitris Kiritsis,et al.  A predictive algorithm for estimating the quality of vehicle engine oil , 2008 .

[146]  Wei Chen,et al.  Multisensor information integration for online wear condition monitoring of diesel engines , 2015 .

[147]  Stephanos Theodossiades,et al.  On the identification of piston slap events in internal combustion engines using tribodynamic analysis , 2015 .

[148]  M. Vellekoop,et al.  Physical sensors for water-in-oil emulsions , 2004 .

[149]  Pascal Carlier,et al.  A New Methodology for On Line Lubricant Consumption Measurement , 2005 .

[150]  Li Du,et al.  A high throughput inductive pulse sensor for online oil debris monitoring , 2011 .

[151]  Jay Lee,et al.  Prognostics and health management design for rotary machinery systems—Reviews, methodology and applications , 2014 .

[152]  Abdollah A. Afjeh,et al.  Integrating Oil Debris and Vibration Gear Damage Detection Technologies Using Fuzzy Logic , 2004 .

[153]  Anand Prabhakaran,et al.  Condition monitoring of steam turbine-generator through contamination analysis of used lubricating oil , 1999 .

[154]  Franz L Dickert,et al.  Monitoring automotive oil degradation: analytical tools and onboard sensing technologies , 2012, Analytical and Bioanalytical Chemistry.

[155]  M. S. Ozogan,et al.  Tribological failure detection and condition monitoring for diesel engines , 1989 .

[156]  Paul Sas,et al.  The influence of external dynamic loads on the lifetime of rolling element bearings: experimental analysis of the lubricant film and surface wear , 2016 .

[157]  Rajendra Singh,et al.  Estimation of coefficient of friction for a mechanical system with combined rolling–sliding contact using vibration measurements , 2015 .

[158]  Adolfo Crespo,et al.  Standards as Reference to Build a PHM-Based Solution , 2016 .

[159]  Jiri Janata,et al.  Peer-reviewed paper , 2004 .

[160]  Yu Jiang,et al.  Transient, Three Dimensional CFD Model of the Complete Engine Lubrication System , 2016 .

[161]  Paul Richards,et al.  Sodium Contamination of Diesel Fuel, its Interaction with Fuel Additives and the Resultant Effects on Filter Plugging and Injector Fouling , 2013 .

[162]  E. Lorna Wong,et al.  Proportional hazards modeling of engine failures in military vehicles , 2010 .

[163]  Xiangliang Zhang,et al.  An up-to-date comparison of state-of-the-art classification algorithms , 2017, Expert Syst. Appl..

[164]  David Valis,et al.  System Condition Estimation Based on Selected Tribodiagnostic Data , 2016, Qual. Reliab. Eng. Int..

[165]  Biswajit Basu,et al.  Prediction of biodegradability of mineral base oils from chemical composition using artificial neural networks , 1998 .

[166]  Saif Nalband,et al.  Feature selection and classification methodology for the detection of knee-joint disorders , 2016, Comput. Methods Programs Biomed..

[167]  Xiaoliang Zhu,et al.  High Throughput Wear Debris Detection in Lubricants Using a Resonance Frequency Division Multiplexed Sensor , 2013, Tribology Letters.

[168]  Mahantesh M Nadakatti,et al.  Artificial intelligence‐based condition monitoring for plant maintenance , 2008 .

[169]  J. C. Fitch,et al.  Sampling methods for used oil analysis , 2000 .

[170]  Luca Francioso,et al.  Metal oxide gas sensor array for the detection of diesel fuel in engine oil , 2008 .

[171]  Wang Liguang,et al.  In-situ lubricating oil condition sensoring method based on two-channel and differential dielectric spectroscopy combined with supervised hierarchical clustering analysis , 2016 .

[172]  Davor Ljubas,et al.  Influence of engine oils dilution by fuels on their viscosity, flash point and fire point , 2010 .

[173]  J. Williams,et al.  Wear debris and associated wear phenomena—fundamental research and practice , 2000 .