Path Planning Strategies to Optimize Accuracy, Quality, Build Time and Material Use in Additive Manufacturing: A Review

Additive manufacturing (AM) is the process of joining materials layer by layer to fabricate products based on 3D models. Due to the layer-by-layer nature of AM, parts with complex geometries, integrated assemblies, customized geometry or multifunctional designs can now be manufactured more easily than traditional subtractive manufacturing. Path planning in AM is an important step in the process of manufacturing products. The final fabricated qualities, properties, etc., will be different when using different path strategies, even using the same AM machine and process parameters. Currently, increasing research studies have been published on path planning strategies with different aims. Due to the rapid development of path planning in AM and various newly proposed strategies, there is a lack of comprehensive reviews on this topic. Therefore, this paper gives a comprehensive understanding of the current status and challenges of AM path planning. This paper reviews and discusses path planning strategies in three categories: improving printed qualities, saving materials/time and achieving objective printed properties. The main findings of this review include: new path planning strategies can be developed by combining some of the strategies in literature with better performance; a path planning platform can be developed to help select the most suitable path planning strategy with required properties; research on path planning considering energy consumption can be carried out in the future; a benchmark model for testing the performance of path planning strategies can be designed; the trade-off among different fabricated properties can be considered as a factor in future path planning design processes; and lastly, machine learning can be a powerful tool to further improve path planning strategies in the future.

[1]  Jingchao Jiang,et al.  A novel fabrication strategy for additive manufacturing processes , 2020 .

[2]  Neri Volpato,et al.  Combining heuristics for tool-path optimisation in material extrusion additive manufacturing , 2020, J. Oper. Res. Soc..

[3]  Xun Xu,et al.  Achieving better connections between deposited lines in additive manufacturing via machine learning. , 2020, Mathematical biosciences and engineering : MBE.

[4]  Mohd Javaid,et al.  3D printed medical parts with different materials using additive manufacturing , 2020 .

[5]  H. H. Liu,et al.  A path planning and sharp corner correction strategy for wire and arc additive manufacturing of solid components with polygonal cross-sections , 2020 .

[6]  M. Walter,et al.  Path-designed 3D printing for topological optimized continuous carbon fibre reinforced composite structures , 2020 .

[7]  Jingchao Jiang,et al.  A Perspective on Using Machine Learning in 3D Bioprinting , 2020, International journal of bioprinting.

[8]  Rui Wang,et al.  Cylindrical slicing and path planning of propeller in wire and arc additive manufacturing , 2020 .

[9]  Louis N. S. Chiu,et al.  Parametric studies and manufacturability experiments on smooth self-supporting topologies , 2020, Virtual and Physical Prototyping.

[10]  Yi Xiong,et al.  Process planning for adaptive contour parallel toolpath in additive manufacturing with variable bead width , 2019, The International Journal of Advanced Manufacturing Technology.

[11]  Shahir Mohd Yusuf,et al.  Review: The Impact of Metal Additive Manufacturing on the Aerospace Industry , 2019 .

[12]  R. Malak,et al.  Functionally Graded Materials through robotics-inspired path planning , 2019, Materials & Design.

[13]  Hans Nørgaard Hansen,et al.  Toolpath Strategies for 5DOF and 6DOF Extrusion-Based Additive Manufacturing , 2019, Applied Sciences.

[14]  David Bue Pedersen,et al.  Motion planning and numerical simulation of material deposition at corners in extrusion additive manufacturing , 2019, Additive Manufacturing.

[15]  Falai Chen,et al.  Path Planning of a Type of Porous Structures for Additive Manufacturing , 2019, Comput. Aided Des..

[16]  Jingchao Jiang,et al.  Optimization of process planning for reducing material waste in extrusion based additive manufacturing , 2019 .

[17]  G. Ma,et al.  A maze-like path generation scheme for fused deposition modeling , 2019, The International Journal of Advanced Manufacturing Technology.

[18]  MenonAditya,et al.  Optimization of Silicone 3D Printing with Hierarchical Machine Learning , 2019, 3D Printing and Additive Manufacturing.

[19]  Ashish Kumar,et al.  Bead Modelling and Deposition Path Planning in Wire Arc Additive Manufacturing of Three Dimensional Parts , 2019, Materials Science Forum.

[20]  Yung C. Shin,et al.  In-Process monitoring of porosity during laser additive manufacturing process , 2019, Additive Manufacturing.

[21]  Aimin Wang,et al.  A sequential path-planning methodology for wire and arc additive manufacturing based on a water-pouring rule , 2019, The International Journal of Advanced Manufacturing Technology.

[22]  Yanan Wang,et al.  Design and experimental validation of self-supporting topologies for additive manufacturing , 2019, Virtual and Physical Prototyping.

[23]  JiangJingchao,et al.  Support Optimization for Flat Features via Path Planning in Additive Manufacturing , 2019, 3D Printing and Additive Manufacturing.

[24]  Zhixiong Li,et al.  Prediction of surface roughness in extrusion-based additive manufacturing with machine learning , 2019, Robotics and Computer-Integrated Manufacturing.

[25]  Helen Lockett,et al.  A modular path planning solution for Wire + Arc Additive Manufacturing , 2019, Robotics Comput. Integr. Manuf..

[26]  Ping Guo,et al.  A novel strategy to fabricate thin 316L stainless steel rods by continuous directed energy deposition in Z direction , 2019, Additive Manufacturing.

[27]  Martin L. Dunn,et al.  Machine-learning based design of active composite structures for 4D printing , 2019, Smart Materials and Structures.

[28]  A. Chiba,et al.  Simple method to construct process maps for additive manufacturing using a support vector machine , 2019, Additive Manufacturing.

[29]  X. Xu,et al.  A support interface method for easy part removal in directed energy deposition , 2019, Manufacturing Letters.

[30]  Linkan Bian,et al.  Deep Learning for Distortion Prediction in Laser-Based Additive Manufacturing using Big Data , 2019, Manufacturing Letters.

[31]  Xun Xu,et al.  Optimisation of multi-part production in additive manufacturing for reducing support waste , 2019, Virtual and Physical Prototyping.

[32]  Richard K. Leach,et al.  Rapid tracking of extrinsic projector parameters in fringe projection using machine learning , 2019 .

[33]  Xiao Li,et al.  Analysis and prediction of printable bridge length in fused deposition modelling based on back propagation neural network , 2019, Virtual and Physical Prototyping.

[34]  Wenlei Xiao,et al.  A Path Planning Method for Robotic Wire and Arc Additive Manufacturing of Thin-Walled Structures with Varying Thickness , 2019, IOP Conference Series: Materials Science and Engineering.

[35]  Jingchao Jiang,et al.  Effect of support on printed properties in fused deposition modelling processes , 2019, Virtual and Physical Prototyping.

[36]  Kelly M. Sullivan,et al.  Tool Path Planning Optimization for Multi-Tool Additive Manufacturing , 2019, Procedia Manufacturing.

[37]  Yu-ya Cui,et al.  A New Algorithm of the Best Path Selection Based on Machine Learning , 2019, IEEE Access.

[38]  Yi Cai,et al.  Deposition Group-based Toolpath Planning for Additive Manufacturing with Multiple Robotic Actuators , 2019, Procedia Manufacturing.

[39]  X. Xu,et al.  Effect of Extrusion Temperature on Printable Threshold Overhang in Additive Manufacturing , 2019, Procedia CIRP.

[40]  Robert X. Gao,et al.  Machine learning-based image processing for on-line defect recognition in additive manufacturing , 2019, CIRP Annals.

[41]  Eleonora Atzeni,et al.  A methodology for evaluating the aesthetic quality of 3D printed parts , 2019, Procedia CIRP.

[42]  Jack Beuth,et al.  Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process , 2019, Additive Manufacturing.

[43]  Yang Yang,et al.  Machine learning for continuous liquid interface production: Printing speed modelling , 2019, Journal of Manufacturing Systems.

[44]  Satyandra K. Gupta,et al.  Trajectory Planning for Conformal 3D Printing Using Non-Planar Layers , 2018 .

[45]  Xun Xu,et al.  Support Structures for Additive Manufacturing: A Review , 2018, Journal of Manufacturing and Materials Processing.

[46]  Suleman Asif,et al.  Modelling and path planning for additive manufacturing of continuous fiber composites , 2018 .

[47]  Markus J. Buehler,et al.  Bioinspired hierarchical composite design using machine learning: simulation, additive manufacturing, and experiment , 2018 .

[48]  Gershon Elber,et al.  Volumetric covering print-paths for additive manufacturing of 3D models , 2018, Comput. Aided Des..

[49]  Roman Kamnik,et al.  Trajectory Planning for Additive Manufacturing with a 6-DOF Industrial Robot , 2018, Advances in Service and Industrial Robotics.

[50]  Charlie C. L. Wang,et al.  Current and future trends in topology optimization for additive manufacturing , 2018 .

[51]  Rafiq Ahmad,et al.  Light-weight shape and topology optimization with hybrid deposition path planning for FDM parts , 2018 .

[52]  Ray Y. Zhong,et al.  Investigation of printable threshold overhang angle in extrusion-based additive manufacturing for reducing support waste , 2018, Int. J. Comput. Integr. Manuf..

[53]  Jill Urbanic,et al.  Visualizing, analyzing, and managing voids in the material extrusion process , 2018 .

[54]  Wenlei Xiao,et al.  Nonplanar slicing and path generation methods for robotic additive manufacturing , 2018 .

[55]  Linkan Bian,et al.  Quantifying Geometric Accuracy With Unsupervised Machine Learning: Using Self-Organizing Map on Fused Filament Fabrication Additive Manufacturing Parts , 2018 .

[56]  Markus Bambach,et al.  Decomposition algorithm for tool path planning for wire-arc additive manufacturing , 2018 .

[57]  Oliver Riedel,et al.  Reduction of Support Structures and Building Time by Optimized Path Planning Algorithms in Multi-axis Additive Manufacturing , 2018 .

[58]  Armin Fügenschuh,et al.  Trajectory Optimization for Wire-Arc Additive Manufacturing , 2018, OR.

[59]  Harry Bikas,et al.  Path planning for the infill of 3D printed parts utilizing Hilbert curves , 2018 .

[60]  Qiang Huang,et al.  Machine learning in tolerancing for additive manufacturing , 2018 .

[61]  Xun Xu,et al.  A benchmarking part for evaluating and comparing support structures of additive manufacturing , 2018 .

[62]  Keimargeo McQueen,et al.  Efficient Path Planning of Secondary Additive Manufacturing Operations , 2018 .

[63]  Hasti Eiliat,et al.  Development of Optimal Material Extrusion Additive Manufacturing Tool Path Parameters for Minimizing Void Regions Using Contemporary Tool Path Solutions , 2018 .

[64]  Oleksandr Semeniuta,et al.  Optimization of Process Parameters for Powder Bed Fusion Additive Manufacturing by Combination of Machine Learning and Finite Element Method: A Conceptual Framework , 2018 .

[65]  Yong He,et al.  A non-retraction path planning approach for extrusion-based additive manufacturing , 2017 .

[66]  Jikai Liu,et al.  Concurrent deposition path planning and structural topology optimization for additive manufacturing , 2017 .

[67]  Peter Borgesen,et al.  Classifying the Dimensional Variation in Additive Manufactured Parts From Laser-Scanned Three-Dimensional Point Cloud Data Using Machine Learning Approaches , 2017 .

[68]  Yong He,et al.  Modeling and process planning for curved layer fused deposition , 2017 .

[69]  Ren C. Luo,et al.  Trajectory generation and planning for simultaneous 3D printing of multiple objects , 2017, 2017 IEEE 26th International Symposium on Industrial Electronics (ISIE).

[70]  DreifusGregory,et al.  Path Optimization Along Lattices in Additive Manufacturing Using the Chinese Postman Problem , 2017 .

[71]  Radovan Kovacevic,et al.  Process planning for 8-axis robotized laser-based direct metal deposition system , 2017 .

[72]  Hermes Giberti,et al.  A path planning algorithm for industrial processes under velocity constraints with an application to additive manufacturing , 2017 .

[73]  Yong He,et al.  A novel path planning methodology for extrusion-based additive manufacturing of thin-walled parts , 2017, Int. J. Comput. Integr. Manuf..

[74]  Anbang Liu,et al.  An optimization approach for path planning of high-quality and uniform additive manufacturing , 2017 .

[75]  Austin Nicolai,et al.  Toolpath Planning for Continuous Extrusion Additive Manufacturing , 2017 .

[76]  Jill Urbanic,et al.  Minimizing Voids With Using an Optimal Raster Orientation and Bead Width for a Material Extrusion Based Process , 2016 .

[77]  Dominic Cuiuri,et al.  Adaptive path planning for wire-feed additive manufacturing using medial axis transformation , 2016 .

[78]  Zengxi Pan,et al.  Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing , 2016 .

[79]  Chi K. Tse,et al.  A 3D printing path optimizer based on Christofides algorithm , 2016, 2016 IEEE International Conference on Consumer Electronics-Taiwan (ICCE-TW).

[80]  Chi K. Tse,et al.  Trajectory planning for 3D printing: A revisit to traveling salesman problem , 2016, 2016 2nd International Conference on Control, Automation and Robotics (ICCAR).

[81]  Harry Bikas,et al.  Additive manufacturing methods and modelling approaches: a critical review , 2015, The International Journal of Advanced Manufacturing Technology.

[82]  Albert J. Shih,et al.  Process Planning for the Fuse Deposition Modeling of Ankle-Foot-Othoses , 2016 .

[83]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[84]  Huijun Li,et al.  A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures , 2015 .

[85]  Zengxi Pan,et al.  Process planning for robotic wire and arc additive manufacturing , 2015, 2015 IEEE 10th Conference on Industrial Electronics and Applications (ICIEA).

[86]  Yong He,et al.  A parallel-based path generation method for fused deposition modeling , 2015 .

[87]  Ibrahim T. Ozbolat,et al.  Design of a New Parametric Path Plan for Additive Manufacturing of Hollow Porous Structures With Functionally Graded Materials , 2014, J. Comput. Inf. Sci. Eng..

[88]  Yong He,et al.  Optimization of tool-path generation for material extrusion-based additive manufacturing technology ☆ , 2014 .

[89]  Hwan-Sik Yoon,et al.  Efficient Path Planning Algorithm for Additive Manufacturing Systems , 2014, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[90]  Dominic Cuiuri,et al.  A tool-path generation strategy for wire and arc additive manufacturing , 2014, The International Journal of Advanced Manufacturing Technology.

[91]  W. D. Li,et al.  An adaptive process planning approach of rapid prototyping and manufacturing , 2013 .

[92]  Lihui Wang,et al.  Adaptive tool-path generation of rapid prototyping for complex product models , 2011 .

[93]  M. Leu,et al.  PROCESS PLANNING AND CONTROL FOR FUNCTIONALLY GRADED MATERIAL FABRICATION USING FREEZE-FORM EXTRUSION FABRICATION , 2011 .

[94]  S. H. Choi,et al.  A dynamic priority-based approach to concurrent toolpath planning for multi-material layered manufacturing , 2010, Comput. Aided Des..

[95]  F. Liou,et al.  Adaptive Deposition Coverage Toolpath Planning for Metal Deposition Process , 2007, DAC 2007.

[96]  Jun Zhang,et al.  Adaptive slicing for a multi-axis Laser Aided Manufacturing Process , 2004 .

[97]  K. M. Yu,et al.  Tool path generation of multi‐material assembly for rapid manufacture , 2002 .

[98]  Mohsen A. Jafari,et al.  Tool Path-Based Deposition Planning in Fused Deposition Processes , 2002 .

[99]  Konstantinos Tarabanis,et al.  Path planning in the Proteus rapid prototyping system , 2001 .