A survey of models, analysis tools and compensation methods for the control of machines with friction

[1]  B. Pasik-Duncan,et al.  Adaptive Control , 1996, IEEE Control Systems.

[2]  R. Ibrahim.  Friction-Induced Vibration, Chatter, Squeal, and Chaos—Part I: Mechanics of Contact and Friction , 1994 .

[3]  Raouf A. Ibrahim,et al.  Friction-Induced Vibration, Chatter, Squeal, and Chaos—Part II: Dynamics and Modeling , 1994 .

[4]  P. Dupont.  Avoiding stick-slip through PD control , 1994, IEEE Trans. Autom. Control..

[5]  P. Dupont,et al.  Stability of Sliding Frictional Surfaces with Varying Normal Force , 1994 .

[6]  B. Armstrong-Hélouvry.  Stick slip and control in low-speed motion , 1993, IEEE Trans. Autom. Control..

[7]  Jürg Tödtli,et al.  Fuzzy Anti-Reset Windup for PID Controllers , 1993 .

[8]  Eric P. Dunlap,et al.  Friction Modeling and Control in Boundary Lubrication , 1993, 1993 American Control Conference.

[9]  M. Tomizuka,et al.  Low Velocity Friction Compensation for Machine Tool Feed Drives , 1993, 1993 American Control Conference.

[10]  B. Friedland,et al.  Friction Estimation in Multimass Systems , 1993, 1993 American Control Conference.

[11]  K.J. Astrom,et al.  Dynamic Friction Models and Control Design , 1993, 1993 American Control Conference.

[12]  Michael K. Masten,et al.  Adaptive Friction Compensation for Line-of-Sight Pointing and Stabilization , 1993, 1993 American Control Conference.

[13]  U. Schafer,et al.  Model Reference Position Control of an Elastic Two-Mass System with Compensation of Coulomb Friction , 1993, 1993 American Control Conference.

[14]  Brian Armstrong-Helouvry,et al.  Compensation Techniques for Servos with Friction , 1993, 1993 American Control Conference.

[15]  Wyatt S. Newman,et al.  A load-dependent transmission friction model: theory and experiments , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[16]  Vijay Kumar,et al.  A minimum principle for the dynamic analysis of systems with frictional contacts , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[17]  Michael A. Peshkin,et al.  The space of admittance control laws that guarantees force-assembly with friction , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[18]  Pierre E. Dupont,et al.  The Effect of Friction on the Forward Dynamics Problem , 1993, Int. J. Robotics Res..

[19]  Paul I. Ro,et al.  Model Reference Adaptive Control of Dual-Mode Micro/Macro Dynamics of Ball Screws for Nanometer Motion , 1993 .

[20]  Yin-Tien Wang,et al.  Dynamics of rigid bodies undergoing multiple frictional contacts , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[21]  Pierre E. Dupont,et al.  The effect of Coulomb friction on the existence and uniqueness of the forward dynamics problem , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[22]  Wyatt S. Newman,et al.  Experimental evaluation of a new traction-drive robotic transmission , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[23]  Minoru Hashimoto,et al.  Experimental study on torque control using harmonic drive built-in torque sensors , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[24]  M. F. Linker,et al.  Effects of variable normal stress on rock friction: Observations and constitutive equations , 1992 .

[25]  Imin Kao,et al.  Quasistatic Manipulation with Compliance and Sliding , 1992 .

[26]  Bernard Friedland,et al.  On adaptive friction compensation , 1991, [1991] Proceedings of the 30th IEEE Conference on Decision and Control.

[27]  Tae-Yong Kuc,et al.  An iterative learning control of robot manipulators , 1991, IEEE Trans. Robotics Autom..

[28]  Clark J. Radcliffe,et al.  Robust nonlinear stick-slip friction compensation , 1991 .

[29]  W. Dean Clingman,et al.  Flexure Bearing Reduces Startup Friction , 1991 .

[30]  R.D. Lorenz,et al.  Experimental identification of friction and its compensation in precise, position controlled mechanisms , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[31]  U. Schafer,et al.  Influence and compensation of Coulomb friction in industrial pointing and tracking systems , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[32]  Isaac Horowitz,et al.  Extensions of dithered feedback systems , 1991 .

[33]  Masayoshi Tomizuka,et al.  Design and Implementation of Digital Servo Controller for High Speed Machine Tools , 1991, 1991 American Control Conference.

[34]  B. Heck,et al.  Model Reduction of a Coulomb Friction Damped System using Singular Perturbaion Theory , 1991, 1991 American Control Conference.

[35]  A. Ruina,et al.  Planar sliding with dry friction Part 1. Limit surface and moment function , 1991 .

[36]  Karl Johan Åström,et al.  A simple neuron servo , 1991, IEEE Trans. Neural Networks.

[37]  Imin Kao,et al.  Dextrous manipulation with compliance and sliding , 1991 .

[38]  Max Donath,et al.  A Method for the Real Time Solution of the Forward Dynamics Problem for Robots Incorporating Friction , 1990 .

[39]  Lawrence M. Germann,et al.  Fine-steering mirror technology supports 10 nanoradian systems , 1990 .

[40]  W. K. Chau,et al.  A critical analysis of dithering algorithms for image processing , 1990, IEEE TENCON'90: 1990 IEEE Region 10 Conference on Computer and Communication Systems. Conference Proceedings.

[41]  Philippe Hirel,et al.  Adaptive optics: dither optimization method in an adaptive optic modal control , 1990, Other Conferences.

[42]  K. K.,et al.  Stick-slip vibrations and chaos , 1990, Philosophical Transactions of the Royal Society of London. Series A: Physical and Engineering Sciences.

[43]  S. Futami,et al.  Nanometer positioning and its micro-dynamics , 1990 .

[44]  S. C. Southward,et al.  A Property of Stick-Slip Friction Models which Promotes Limit Cycle Generation , 1990, 1990 American Control Conference.

[45]  Bernard Friedland,et al.  On the Modeling and Simulation of Friction , 1990, 1990 American Control Conference.

[46]  James P. Karlen,et al.  A dual-arm dexterous manipulator system with anthropomorphic kinematics , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[47]  Carlos Canudas de Wit,et al.  Robust adaptive friction compensation , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[48]  Brian Armstrong-Hélouvry,et al.  Stick-slip arising from Stribeck friction , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[49]  R. Gray,et al.  Dithering and its effects on sigma delta and multi-stage sigma delta modulation , 1990, IEEE International Symposium on Circuits and Systems.

[50]  C. Gao,et al.  On Stick-Slip and the Velocity Dependence of Friction at Low Speeds , 1990 .

[51]  J. C. Maron,et al.  Identification and Adaptive Control of Mechanical Systems with Friction , 1990 .

[52]  Brian Armstrong,et al.  On Finding Exciting Trajectories for Identification Experiments Involving Systems with Nonlinear Dynamics , 1989, Int. J. Robotics Res..

[53]  G. Younkin,et al.  Modeling machine tool feed servo drives using simulation techniques to predict performance , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[54]  E. Ostertag,et al.  Functional Disturbance Observer for Simultaneous Control and Dry Friction Compensation , 1989 .

[55]  Weiping Li,et al.  Composite adaptive control of robot manipulators , 1989, Autom..

[56]  H. Benjamin Brown,et al.  Rule-Based Fuzzy Control of a Single-Link Flexible Manipulator in the Presence of Joint Friction and Load Changes , 1989, 1989 American Control Conference.

[57]  Brian Armstrong,et al.  Control of Machines with Non-Linear Low Velocity Friction: A Dimensional Analysis , 1989, ISER.

[58]  Oussama Khatib,et al.  Design and Development of Torque- Controlled Joints , 1989, ISER.

[59]  J. C. Maron,et al.  NONLINEAR IDENTIFICATION AND OBSERVER BASED COMPENSATION OF FRICTION IN MECHANICAL SYSTEMS , 1989 .

[60]  Jeffrey C. Trinkle,et al.  A quasi-static analysis of dextrous manipulation with sliding and rolling contacts , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[61]  Minoru Hashimoto,et al.  Robot motion control based on joint torque sensing , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[62]  Carlos Canudas de Wit,et al.  Adaptive Friction Compensation in Robot Manipulators: Low Velocities , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[63]  G. Brandenburg,et al.  Influence and adaptive compensation of simultaneously acting backlash and coulomb friction in elastic two-mass systems of robots and machine tools , 1989, Proceedings. ICCON IEEE International Conference on Control and Applications.

[64]  P. Pan,et al.  Simple Formulas for Performance Parameters Used in Elastohydrodynamically Lubricated Line Contacts , 1989 .

[65]  Kazuhiro Kosuge,et al.  Motion control of a robot arm using joint torque sensors , 1988, Proceedings of the 27th IEEE Conference on Decision and Control.

[66]  A. Gogoussis,et al.  Modeling robots: A real time method for solving the forward dynamics problem incorporating friction , 1988 .

[67]  V. Held,et al.  Estimation of Friction Characteristics, Inertial and Coupling Coefficients in Robotic Joints Based on Current and Speed Measurements , 1988 .

[68]  N. Loh,et al.  Modeling and Identification of a Class of Servomechanism Systems With Stick-Slip Friction , 1988 .

[69]  M. V. Rayiko,et al.  Some aspects of boundary lubrication in the local contact of friction surfaces , 1988 .

[70]  E. H. Gassenfeit,et al.  Friction Coefficients Measured at Lubricated Planar Contacts During Start-Up , 1988 .

[71]  Bernard Morgowicz,et al.  Techniques for real-time simulation of robot manipulators , 1988 .

[72]  C. Blackwell,et al.  Precision pointing of scientific instruments on space station: The LFGGREC perspective , 1988, Proceedings of the IEEE 1988 National Aerospace and Electronics Conference.

[73]  Larry A. Stockum,et al.  Precision Stabilization System Design To Reduce The Effects Of Friction , 1988, Photonics West - Lasers and Applications in Science and Engineering.

[74]  Arthur C. Sanderson,et al.  Minimization of energy in quasi-static manipulation , 1988, IEEE Trans. Robotics Autom..

[75]  John Kenneth Salisbury,et al.  Preliminary design of a whole-arm manipulation system (WAMS) , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[76]  Yu Wang,et al.  On the inconsistency of rigid-body frictional planar mechanics , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[77]  Imin Kao,et al.  The sliding of robot fingers under combined torsion and shear loading , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[78]  Karl Johan Åström,et al.  Limit cycle oscillations in high performance robot drives , 1988 .

[79]  Igorʹ Viktorovich Kragelʹskiĭ,et al.  Handbook of Friction Units of Machines , 1988 .

[80]  S. O. Fatunla.  Numerical Methods for Initial Value Problems in Ordinary Differential Equations , 1988 .

[81]  Masayoshi Tomizuka,et al.  Implementation of Adaptive Techniques for Motion Control of Robotic Manipulators , 1988 .

[82]  X. Ai,et al.  A full numerical solution for general transient elastohydrodynamic line contacts and its application , 1988 .

[83]  Prokop Środa.  Analysis of the shape of the contact geometry during meshing of involute gears , 1988 .

[84]  D. Pavelescu,et al.  The sliding friction coefficient — its evolution and usefulness , 1987 .

[85]  J. Bentsman.  Oscillations-Induced Transitions and Their Application in Control of Dynamical Systems , 1987 .

[86]  J. Slotine,et al.  On the Adaptive Control of Robot Manipulators , 1987 .

[87]  P. Blau.  A Model for Run-In and Other Transitions in Sliding Friction , 1987 .

[88]  Toshiro Higuchi,et al.  Application of Electromagnetic Impulsive Force to Precise Positioning , 1987 .

[89]  Masayoshi Tomizuka,et al.  Adaptive Pulse Width Control for Precise Positioning under Influence of Stiction and Coulomb Friction , 1987, 1987 American Control Conference.

[90]  S. Shankar Sastry,et al.  Adaptive Control of Mechanical Manipulators , 1987, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[91]  John Kenneth Salisbury,et al.  The Effect of coulomb friction and stiction on force control , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[92]  Mark R. Cutkosky,et al.  Skin materials for robotic fingers , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[93]  V. T. Rajan,et al.  Dynamics of a rigid body in frictional contact with rigid walls: Motion in two dimensions , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[94]  Peter C. Müller,et al.  Dynamical Behaviour of Nonlinear Multibody Systems Due to Coulomb Friction and Backlash , 1986 .

[95]  Mark R. Cutkosky,et al.  Friction, Stability and the Design of Robotic Fingers , 1986 .

[96]  Brian D. O. Anderson,et al.  Stability of adaptive systems: passivity and averaging analysis , 1986 .

[97]  Oussama Khatib,et al.  Joint Torque Sensory Feedback in the Control of a PUMA Manipulator , 1986, 1986 American Control Conference.

[98]  Carlos Canudas de Wit,et al.  Adaptive friction compensation in DC motor drives , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[99]  Masayoshi Tomizuka,et al.  Application of nonlinear friction compensation to robot arm control , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[100]  Lewis Himmell,et al.  Examination of adaptive control-based approaches to friction compensation in spacecraft gimbal control systems , 1985, 1985 24th IEEE Conference on Decision and Control.

[101]  N. Kikuchi,et al.  An Incremental Constitutive Relation of Unilateral Contact Friction for Large Deformation Analysis , 1985 .

[102]  Thomas G. Bifano,et al.  Real Time Control Of Spindle Runout , 1985 .

[103]  Dean Karnopp,et al.  Computer simulation of stick-slip friction in mechanical dynamic systems , 1985 .

[104]  Amitabha Mukerjee,et al.  Self-calibration in robot manipulators , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[105]  Craig D. Walrath,et al.  Adaptive bearing friction compensation based on recent knowledge of dynamic friction , 1984, Autom..

[106]  J. T. Oden,et al.  Models and computational methods for dynamic friction phenomena , 1984 .

[107]  Kamal Youcef-Toumi,et al.  Analysis and design of a direct-drive ARM with a five-bar-link parallel drive mechanism , 1984 .

[108]  Jean-Jacques E. Slotine,et al.  Sliding controller design for non-linear systems , 1984 .

[109]  S Hinduja,et al.  Modelling the Characteristics of Interface Surfaces by the Finite Element Method , 1984 .

[110]  Bruce Ellison,et al.  Inertial Stabilization Of Periscopic Sights Band Driven Three Axle Gimbal , 1983, Photonics West - Lasers and Applications in Science and Engineering.

[111]  S. Mossaheb.  Application of a method of averaging to the study of dithers in non-linear systems , 1983 .

[112]  A. Ruina,et al.  Stability of Steady Frictional Slipping , 1983 .

[113]  D. Pavelescu,et al.  The friction-speed relation and its influence on the critical velocity of stick-slip motion , 1982 .

[114]  A. Tudor,et al.  The squeeze film under boundary lubrication conditions and its effect on the vertical displacement of sliding bodies , 1982 .

[115]  J. S. Luh,et al.  Joint torque control by a direct feedback for industrial robots , 1981, 1981 20th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[116]  A. Zmitrowicz.  A theoretical model of anisotropic dry friction , 1981 .

[117]  N. Suh,et al.  The genesis of friction , 1981 .

[118]  J. Bernard.  The simulation of Coulomb friction in mechanical systems , 1980 .

[119]  A. Wilson.  The Relative Thickness of Grease and Oil Films in Rolling Bearings , 1979 .

[120]  D. Dowson.  History of Tribology , 1979 .

[121]  J. Dieterich.  Modeling of rock friction: 1. Experimental results and constitutive equations , 1979 .

[122]  A. Cowley,et al.  Experimental Study of Normal and Shear Characteristics of Machined Surfaces in Contact , 1978 .

[123]  G. Zames,et al.  Structural stabilization and quenching by dither in nonlinear systems , 1977 .

[124]  V. Utkin.  Variable structure systems with sliding modes , 1977 .

[125]  R. A. Burton,et al.  Principles of Tribology , 1977 .

[126]  Phil R Dahl,et al.  Measurement of Solid Friction Parameters of Ball Bearings , 1977 .

[127]  P. Dahl.  Solid Friction Damping of Mechanical Vibrations , 1976 .

[128]  G. R. Symmons,et al.  Stability criterion for stick-slip motion using a discontinuous dynamic friction model , 1976 .

[129]  G. Zames,et al.  Dither in nonlinear systems , 1976 .

[130]  E. J. Wellauer,et al.  Application of EHD Oil Film Theory to Industrial Gear Drives , 1976 .

[131]  R. Richardson,et al.  Surface friction under time-dependent loads , 1976 .

[132]  G. Cockerham,et al.  Stick-slip stability by analogue simulation , 1976 .

[133]  S. Kato,et al.  Stick-Slip Motion of Machine Tool Slideway , 1974 .

[134]  J. Gilbart,et al.  Adaptive compensation for an optical tracking telescope , 1974, Autom..

[135]  C. A. Brockley,et al.  The role of the rate of application of the tangential force in determining the static friction coefficient , 1973 .

[136]  T. Matsubayashi,et al.  Some Considerations on Characteristics of Static Friction of Machine Tool Slideway , 1972 .

[137]  D. Moore.  The Friction and Lubrication of Elastomers , 1972 .

[138]  A. Schallamach.  How Does Rubber Slide , 1971 .

[139]  P. L. Ko,et al.  The Measurement of Friction and Friction-Induced Vibration , 1970 .

[140]  R. Hall,et al.  Nonlinear Compensation , 1969 .

[141]  R. Bell,et al.  A Study of the Stick-Slip Motion of Machine Tool Feed Drives: , 1969 .

[142]  A. Banerjee.  Influence of kinetic friction on the critical velocity of stick-slip motion , 1968 .

[143]  P. Dahl.  A Solid Friction Model , 1968 .

[144]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[145]  G. Vinogradov,et al.  Steel-to-steel friction over a very wide range of sliding speeds , 1967 .

[146]  D. M. Tolstoĭ.  Significance of the normal degree of freedom and natural normal vibrations in contact friction , 1967 .

[147]  C. A. Brockley,et al.  Friction-Induced Vibration , 1967 .

[148]  M. D. Hersey,et al.  Theory and Research in Lubrication , 1966 .

[149]  C. Shen,et al.  Nonlinear Compensation of a Second-and Third-Order System with Dry Friction , 1964, IEEE Transactions on Applications and Industry.

[150]  J. Woodward,et al.  Describing functions for nonlinear friction in relay servos , 1963 .

[151]  J. Gillis,et al.  Asymptotic Methods in the Theory of Non‐Linear Oscillations , 1963 .

[152]  C. Shen.  Synthesis of high-order nonlinear control systems with ramp input , 1962 .

[153]  B. R. Singh,et al.  Study of Critical Velocity of Stick-Slip Sliding , 1960 .

[154]  Hans D. Fridman,et al.  Reduction of Static Friction by Sonic Vibrations , 1959 .

[155]  E. Rabinowicz.  The Intrinsic Variables affecting the Stick-Slip Process , 1958 .

[156]  K. N. Satyendra,et al.  Describing functions representing the effect of inertia, backlash, and coulomb friction on the stability of an automatic control system - I , 1956, Transactions of the American Institute of Electrical Engineers, Part II: Applications and Industry.

[157]  E. Rabinowicz.  Stick and Slip , 1956 .

[158]  E. Rabinowicz.  Autocorrelation Analysis of the Sliding Process , 1956 .

[159]  Charles E. Tedholm,et al.  The Statistical Nature of Friction , 1955, Journal of Fluids Engineering.

[160]  Peter M. Schultheiss,et al.  Static and Sliding Friction in Feedback Systems , 1953 .

[161]  E. Rabinowicz.  The Nature of the Static and Kinetic Coefficients of Friction , 1951 .

[162]  E. Rabinowicz,et al.  Metallic transfer between sliding metals: an autoradiographic study , 1951, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[163]  J. R. Bristow,et al.  Frictional Relaxation Oscillations , 1950 .

[164]  H. W. Swift,et al.  LXXVIII. Frictional relaxation oscillations , 1949 .

[165]  A. Tustin,et al.  The effects of backlash and of speed-dependent friction on the stability of closed-cycle control systems , 1947 .

[166]  J. B. Sampson,et al.  Studies in Lubrication: XII. Friction Behavior During the Slip Portion of the Stick‐Slip Process , 1943 .

[167]  F. P. Bowden,et al.  The Area of Contact between Stationary and between Moving Surfaces , 1939 .

[168]  F. P. Bowden,et al.  The Nature of Sliding and the Analysis of Friction , 1939 .

[169]  Sydney Thomas.  XXXIII. Vibrations damped by solid friction , 1930 .

[170]  A. H. Gill.  FRICTION AND LUBRICATION. , 1905 .

[171]  Bernard Friedland,et al.  Dynamic Friction Model of Lubricated Surfaces for Precise Motion Control , 1994 .

[172]  M. Kaneta,et al.  Effects of Surface Roughness on Point Contact EHL , 1993 .

[173]  P. Bliman.  Mathematical study of the Dahl's friction model , 1992 .

[174]  L. O'connor,et al.  Active magnetic bearings give systems a lift , 1992 .

[175]  R. Ibrahim.  Friction-induced vibration, chatter, squeal, and chaos: Part I - Mechanics of friction , 1992 .

[176]  L. O'connor,et al.  French TGV making tracks in Spain , 1992 .

[177]  Andres Soom,et al.  Friction-induced vibration, chatter, squeal, and chaos : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992 , 1992 .

[178]  N. Ehrich.  An Investigation of Control Strategies for Friction Compensation , 1991 .

[179]  A. Soom,et al.  Normal Vibrations and Friction Under Harmonic Loads: Part I—Hertzian Contacts , 1991 .

[180]  Brian Armstrong-Hélouvry,et al.  Control of machines with friction , 1991, The Kluwer international series in engineering and computer science.

[181]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[182]  A. Soom,et al.  Normal Vibrations and Friction Under Harmonic Loads: Part II—Rough Planar Contacts , 1991 .

[183]  A. Soom,et al.  Friction at a Lubricated Line Contact Operating at Oscillating Sliding Velocities , 1990 .

[184]  Akihito Sano,et al.  Vibration control of robot arm using joint torque feedback. The case of the SCARA-type arm. , 1990 .

[185]  J. Oden,et al.  A study of static and kinetic friction , 1990 .

[186]  Akira Shimokohbe,et al.  Dynamic stiffness control of active air bearing. , 1989 .

[187]  Graham T. Smith,et al.  Advanced MacHining: The Handbook of Cutting Technology , 1989 .

[188]  F. Sadeghi,et al.  Compressible Elastohydrodynamic Lubrication of Rough Surfaces , 1989 .

[189]  Karl Johan Åström,et al.  Adaptive Control , 1989, Embedded Digital Control with Microcontrollers.

[190]  Ward O. Winer,et al.  New materials approaches to tribology : theory and applications ; Symposium held November 29-December 2, 1988, Boston, Massachusetts, U.S.A. , 1989 .

[191]  C. A. Canudas De Wit,et al.  Adaptive Control for Partially Known Systems: Theory and Applications , 1989 .

[192]  Wenceslao Angel Cebuhar,et al.  Smoothing and approximate linearization of discontinuous control systems , 1988 .

[193]  Brian S. R. Armstrong,et al.  Dynamics for robot control: friction modeling and ensuring excitation during parameter identification , 1988 .

[194]  K. C. Ludema,et al.  Engineering progress and cultural problems in tribology , 1988 .

[195]  D. Zhu,et al.  Effect of Surface Roughness on the Point Contact EHL , 1988 .

[196]  A. G. Papay.  Industrial gear oils. State of the art , 1988 .

[197]  M.A. Peshkin,et al.  Minimization of energy in quasistatic manipulation , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[198]  S. Shankar Sastry,et al.  Adaptive identification and control for manipulators without using joint accelerations , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[199]  S. Thomas Alexander,et al.  Adaptive Signal Processing , 1986, Texts and Monographs in Computer Science.

[200]  P. Okubo.  Experimental and numerical model studies of frictional instability seismic sources , 1986 .

[201]  Johannes Brändlein,et al.  Ball and roller bearings: Theory, design, and application , 1985 .

[202]  D. L. Facchiano,et al.  EP industrial gear oils. A look at additive functions and a comparison of sulfur phosphorus and leaded gear oils , 1984 .

[203]  A. Mees.  Describing Functions: Ten Years On , 1984 .

[204]  A. Ruina,et al.  Slip motion and stability of a single degree of freedom elastic system with rate and state dependent friction , 1984 .

[205]  G. T. Rooney,et al.  Coulomb friction in mechanism sliding joints , 1982 .

[206]  Per Lötstedt.  Coulomb Friction in Two-Dimensional Rigid Body Systems , 1981 .

[207]  Richard Paul,et al.  Manipulator compliance based on joint torque control , 1980, 1980 19th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[208]  D. C. Threlfall,et al.  The inclusion of Coulomb friction in mechanisms programs with particular reference to DRAM au programme DRAM , 1978 .

[209]  G. Siouris,et al.  Nonlinear Control Engineering , 1977, IEEE Transactions on Systems, Man, and Cybernetics.

[210]  Desmond F. Moore,et al.  The Friction of Pneumatic Tyres , 1975 .

[211]  F. P. Bowden,et al.  Friction: An Introduction to Tribology , 1973 .

[212]  S. Kato,et al.  On the Dynamic Behavior of Machine Tool Slideway : 2nd Report, Characteristics of Kinetic Friction in "Stick Slip" Motion , 1969 .

[213]  井沢 忠.  A study of stick-slip , 1968 .

[214]  C. Coulomb.  Théorie des machines simples, en ayant égard au frottement de leurs parties et a la roideur des cordages , 1968 .

[215]  C. A. Brockley,et al.  The Time-Dependence of Static Friction , 1968 .

[216]  D. Godfrey.  Vibration Reduces Metal to Metal Contact and Causes an Apparent Reduction in Friction , 1967 .

[217]  D. Dowson,et al.  Elasto-hydrodynamic lubrication : the fundamentals of roller and gear lubrication , 1966 .

[218]  E. Rabinowicz,et al.  Friction and Wear of Materials , 1966 .

[219]  Austin Blaquière,et al.  Nonlinear System Analysis , 1966 .

[220]  J. T. Law,et al.  Reduction of Static Friction by Sonic Vibrations , 1959 .

[221]  M. Silberberg.  A note on the describing function of an element with coulomb, static, and viscous friction , 1957, Transactions of the American Institute of Electrical Engineers, Part II: Applications and Industry.

[222]  Dudley D. Fuller,et al.  Theory and Practice of Lubrication for Engineers , 1956 .

[223]  W. Philipzik.  Zur hydrodynamischen Theorie der Schmiermittelreibung , 1956 .

[224]  LeRoy A. MacColl,et al.  Fundamental theory of servomechanisms , 1945 .

[225]  A. Palmgren.  Ball and roller bearing engineering , 1945 .

[226]  É. Delassus.  Sur les lois du frottement de glissement , 1923 .

[227]  O. Reynolds.  IV. On the theory of lubrication and its application to Mr. Beauchamp tower’s experiments, including an experimental determination of the viscosity of olive oil , 1886, Philosophical Transactions of the Royal Society of London.

[228]  Hertz.  On the Contact of Elastic Solids , 1882 .