Ultra-incompressible High-Entropy Diborides.

Transition metal borides are commonly hard and incompressible, offering great opportunities for advanced applications under extreme conditions. Recent studies show that the hardness of high-entropy borides may exceed that of their constituent simple borides due to the "cocktail effect". However, how high-entropy borides deform elastically remains largely unknown. Here, we show that two newly synthesized high-entropy diborides are ultra-incompressible, attaining ∼90% of the incompressibility of single-crystalline diamond and exhibiting a 50-60% enhancement over the density functional theory predictions. This unusual behavior is attributed to a Hall-Petch-like effect resulting from nanosizing under high pressure, which increases the bulk moduli through dynamic dislocation interactions and creation of stacking faults. The exceptionally low compressibility, together with their high phase stabilities, high hardness, and high electric conductance, renders them promising candidates for electromechanics and microelectronic devices that demand strong resistance to environmental impacts, in addition to traditional grinding and abrading.

[1]  Bin Chen.  Exploring nanomechanics with high-pressure techniques , 2020 .

[2]  Wei Zhang,et al.  Improved densification and hardness of high-entropy diboride ceramics from fine powders synthesized via borothermal reduction process , 2020, Ceramics International.

[3]  P. Torelli,et al.  Stabilization by Configurational Entropy of the Cu(II) Active Site during CO Oxidation on Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O , 2020, The journal of physical chemistry letters.

[4]  Christian Plessl,et al.  CP2K: An electronic structure and molecular dynamics software package - Quickstep: Efficient and accurate electronic structure calculations. , 2020, The Journal of chemical physics.

[5]  M. Kunz,et al.  High-pressure strengthening in ultrafine-grained metals , 2020, Nature.

[6]  S. Walley,et al.  The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals , 2019, Journal of Materials Science.

[7]  J. Qiu,et al.  Microstructure and mechanical properties of high-entropy borides derived from boro/carbothermal reduction , 2019, Journal of the European Ceramic Society.

[8]  Shikuan Sun,et al.  Dense high-entropy boride ceramics with ultra-high hardness , 2019, Scripta Materialia.

[9]  R. Orrú,et al.  Novel processing route for the fabrication of bulk high-entropy metal diborides , 2019, Scripta Materialia.

[10]  Artem R Oganov,et al.  New Tungsten Borides, Their Stability and Outstanding Mechanical Properties. , 2018, The journal of physical chemistry letters.

[11]  Jun Hu,et al.  Mechanochemical‐Assisted Synthesis of High‐Entropy Metal Nitride via a Soft Urea Strategy , 2018, Advanced materials.

[12]  A. Goryaeva,et al.  Prediction of Mechanical Twinning in Magnesium Silicate Post-Perovskite , 2017, Scientific Reports.

[13]  F. Mücklich,et al.  Exploring the high entropy alloy concept in (AlTiVNbCr)N , 2017 .

[14]  R. Kaner,et al.  Rediscovering the Crystal Chemistry of Borides , 2017, Advanced materials.

[15]  Tyler J. Harrington,et al.  High-Entropy Metal Diborides: A New Class of High-Entropy Materials and a New Type of Ultrahigh Temperature Ceramics , 2016, Scientific Reports.

[16]  D. Miracle,et al.  A critical review of high entropy alloys and related concepts , 2016 .

[17]  Jacob L. Jones,et al.  Entropy-stabilized oxides , 2015, Nature Communications.

[18]  Yanchun Zhou,et al.  General Trends in Electronic Structure, Stability, Chemical Bonding and Mechanical Properties of Ultrahigh Temperature Ceramics TMB2 (TM = transition metal) , 2015 .

[19]  Jaafar A. El-Awady,et al.  Unravelling the physics of size-dependent dislocation-mediated plasticity , 2015, Nature Communications.

[20]  Y. Al-Khatatbeh,et al.  From superhard to hard: A review of transition metal dioxides TiO2, ZrO2, and HfO2 hardness , 2014, Journal of Superhard Materials.

[21]  Sabu Thomas,et al.  Estimation of lattice strain in ZnO nanoparticles: X-ray peak profile analysis , 2014 .

[22]  J. Yeh,et al.  High-Entropy Alloys: A Critical Review , 2014 .

[23]  K. V. Rao,et al.  X-Ray Analysis by Williamson-Hall and Size-Strain Plot Methods of ZnO Nanoparticles with Fuel Variation , 2014 .

[24]  H. Mao,et al.  Detecting grain rotation at the nanoscale , 2014, Proceedings of the National Academy of Sciences.

[25]  Kristin A. Persson,et al.  Commentary: The Materials Project: A materials genome approach to accelerating materials innovation , 2013 .

[26]  H. Mao,et al.  Texture of Nanocrystalline Nickel: Probing the Lower Size Limit of Dislocation Activity , 2012, Science.

[27]  Y. Le Godec,et al.  Creation of Nanostuctures by Extreme Conditions: High‐Pressure Synthesis of Ultrahard Nanocrystalline Cubic Boron Nitride , 2012, Advanced materials.

[28]  Peter Moeck,et al.  Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration , 2011, Nucleic Acids Res..

[29]  K. Cooper,et al.  Nanomechanics of Hall-Petch relationship in nanocrystalline materials , 2009 .

[30]  Stefano de Gironcoli,et al.  QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials , 2009, Journal of physics. Condensed matter : an Institute of Physics journal.

[31]  J. Banfield,et al.  Size-dependent elasticity of nanocrystalline titania , 2009 .

[32]  Walter Steurer,et al.  Transition Metal Borides: Superhard versus Ultra‐incompressible , 2008 .

[33]  Matt Probert,et al.  First principles methods using CASTEP , 2005 .

[34]  B. Lönnberg.  Thermal expansion studies on the group IV-VII transition metal diborides , 1988 .

[35]  F. Birch,et al.  Finite strain isotherm and velocities for single‐crystal and polycrystalline NaCl at high pressures and 300°K , 1978 .

[36]  E. Hall,et al.  The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .

[37]  Yoshio Waseda,et al.  X-Ray Diffraction Crystallography , 2011 .

[38]  G. K. WILLIAMSONt,et al.  X-RAY LINE BROADENING FROM FILED ALUMINIUM AND WOLFRAM* , 2002 .

[39]  N. Petch,et al.  The Cleavage Strength of Polycrystals , 1953 .