Motion Planning for Two Robots of an Object Handling System Considering Fast Transition Between Stable States

Abstract Fast transition from a stable initial state to a stable handling state is important when multiple mobile robots grasp and transport a bulky and heavy object. In this paper, we present motion planning for two robots of an irregularly shaped object handling system considering fast transition between stable states. A cooperative object handling system consisting of a gripper robot equipped with a gripper and a lifter robot equipped with a lifter was first designed. Then, a strategy to realize fast transition between stable states by using the object handling system designed was proposed. While grasping and lifting an object off the ground, a gripper robot grasps and lifts up the object from one side to provide enough space for a lifter robot to lift the object off the ground cooperatively. Fast transition between stable states is formulated as a constraint optimization problem. The goal is to realize transition from a stable initial state to a stable handling state in a minimal amount of time. Experiments involving two robots and everyday objects were conducted. The two robots cooperatively obtained fast transition between stable states. The results illustrate the validity of the proposed method.

[1]  Henrik I. Christensen,et al.  Automatic grasp planning using shape primitives , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[2]  Peter K. Allen,et al.  Grasp Planning via Decomposition Trees , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[3]  Markus Vincze,et al.  Efficient 3D Object Detection by Fitting Superquadrics to Range Image Data for Robot's Object Manipulation , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[4]  Y. Aiyama,et al.  Initial grasping strategy for an unknown object by cooperative mobile robots , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[5]  Thomas Sugar,et al.  Control of cooperating mobile manipulators , 2002, IEEE Trans. Robotics Autom..

[6]  Gabriel Ramírez-Torres,et al.  Motion Planning for Cooperative Multi-robot Box-Pushing Problem , 2008, IBERAMIA.

[7]  Jun Ota,et al.  Robotic grasping based on partial shape information , 2010, 2010 IEEE/SICE International Symposium on System Integration.

[8]  Hisashi Osumi.  Design of Cooperative System Consisting of Multiple Position Controlled Robots. , 1999 .

[9]  Claire Dune,et al.  Active rough shape estimation of unknown objects , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[10]  Jun Ota,et al.  Dexterous Assembly Manipulation of a Compact Array of Objects , 1998 .

[11]  Bruce Randall Donald,et al.  Moving furniture with teams of autonomous robots , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[12]  Bruce Randall Donald,et al.  Distributed manipulation of multiple objects using ropes , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[13]  Jun Ota,et al.  Motion planning of multiple mobile robots for Cooperative manipulation and transportation , 2003, IEEE Trans. Robotics Autom..

[14]  Danica Kragic,et al.  Selection of robot pre-grasps using box-based shape approximation , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[15]  Kazuhiro Kosuge,et al.  Trajectory Generation for Multiple Robots of a Car Transportation System , 2008, DARS.

[16]  Jun Ota,et al.  Manipulation of an irregularly shaped object by two mobile robots , 2010, 2010 IEEE/SICE International Symposium on System Integration.