Visualization of Environmental Information by Haptograph Based on Wideband Force Control

Artificial acquisition and reproduction of human sensations are basic technologies of communication engineering. For example, auditory information is obtained by a microphone, and a speaker reproduces it by artificial means. Furthermore, a video camera and a television make it possible to transmit visual sensation by broadcasting. On the contrary, since tactile or haptic information is subject to the Newton's "law of action and reaction" in the real world, a device which acquire, transmit, and reproduce the information has not been established. Real-world haptics is the key technology for future haptic communication engineering. This paper proposes a novel acquisition method of haptic information named "haptograph". The haptograph visualizes the haptic information like photograph. Since temporal and spatial analyses are conducted to represent haptic information as the haptograph, it is possible to be recognized and to be evaluated intuitively. In this paper, the proposed haptograph is applied to haptic recognition of the contact environment. A linear motor contacts to the surface of the environment and its reaction force is used to make a haptograph. A robust contact motion and sensor-less sensing of the reaction force are attained by using a disturbance observer. As a result, an encyclopedia of contact environment is attained.

[1]  Mark W. Spong,et al.  Bilateral control of teleoperators with time delay , 1989 .

[2]  Kouhei Ohnishi,et al.  Medical mechatronics - An application to haptic forceps , 2005, Annu. Rev. Control..

[3]  Yuichi Matsumoto,et al.  Modeling of force sensing and validation of disturbance observer for force control , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).

[4]  Blake Hannaford,et al.  A design framework for teleoperators with kinesthetic feedback , 1989, IEEE Trans. Robotics Autom..

[5]  Kouhei Ohnishi,et al.  Motion control for advanced mechatronics , 1996 .

[6]  Kouhei Ohnishi,et al.  A Controller Design Method of Bilateral Control System , 2006 .

[7]  A. Sabanovi,et al.  Hybrid Motion Controller - SMC Point of View , 2005, Proceedings of the IEEE International Symposium on Industrial Electronics, 2005. ISIE 2005..

[8]  A. Sabanovic,et al.  Sliding modes in power electronics and motion control systems , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).

[9]  Y. F. Li,et al.  On the dynamic behavior of a force/torque sensor for robots , 1998, IEEE Trans. Instrum. Meas..

[10]  K. Ohnishi,et al.  Absolute stabilization of multi-mass resonant system by phase-lead compensator based on disturbance observer , 2006, 9th IEEE International Workshop on Advanced Motion Control, 2006..

[11]  Septimiu E. Salcudean,et al.  Bilateral parallel force/position teleoperation control , 2002, J. Field Robotics.

[12]  Masayoshi Tomizuka Sensors in the Engineering of Modern Mechatronic Systems , 2004 .

[13]  Yuichi Matsumoto,et al.  Analysis and experimental validation of force bandwidth for force control , 2003, IEEE International Conference on Industrial Technology, 2003.

[14]  Roberto Oboe Force-reflecting teleoperation over the Internet: the JBIT project , 2003 .

[15]  Kouhei Ohnishi,et al.  A realization of haptic training system by multilateral control , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[16]  Yuichi Matsumoto,et al.  An analysis and design of bilateral control based on disturbance observer , 2003, IEEE International Conference on Industrial Technology, 2003.

[17]  Tsuneo Yoshikawa,et al.  Bilateral control of master-slave manipulators for ideal kinesthetic coupling-formulation and experiment , 1994, IEEE Trans. Robotics Autom..

[18]  Septimiu E. Salcudean,et al.  Transparency in time-delayed systems and the effect of local force feedback for transparent teleoperation , 2002, IEEE Trans. Robotics Autom..

[19]  M. Bertoluzzo,et al.  Performance analysis of a high-bandwidth torque disturbance compensator , 2004, IEEE/ASME Transactions on Mechatronics.

[20]  Toshiyuki Murakami,et al.  Torque sensorless control in multidegree-of-freedom manipulator , 1993, IEEE Trans. Ind. Electron..

[21]  Kazuhiro Kosuge,et al.  Tele-manipulation system based on task-oriented virtual tool , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[22]  Yuichi Matsumoto,et al.  Realization of "law of action and reaction" by multilateral control , 2004, The 8th IEEE International Workshop on Advanced Motion Control, 2004. AMC '04..

[23]  Roberto Oboe Web-interfaced, force-reflecting teleoperation systems , 2001, IEEE Trans. Ind. Electron..

[24]  Dale A. Lawrence Stability and transparency in bilateral teleoperation , 1993, IEEE Trans. Robotics Autom..

[25]  S. Katsura,et al.  Advanced motion control by multi-sensor based disturbance observer , 2006, 9th IEEE International Workshop on Advanced Motion Control, 2006..

[26]  Kouhei Ohnishi,et al.  TORQUE - SPEED REGULATION OF DC MOTOR BASED ON LOAD TORQUE ESTIMATION METHOD. , 1983 .