Design and characterization of a photo-sensor based force measurement unit (FMU)

Abstract This paper presents the design and development of a customizable force measurement unit (FMU). The sensing mechanism is based on a monolithic structure incorporating a flexure with an interrupter and photo-sensors. The FMU is able to measure force by the deformation of the flexure, which results in a difference in the intensity of infrared light detected. Owing to the simplicity of the proposed structure and the sensing method, the FMU is an adaptable sensing platform with high design flexibility. We performed finite element method (FEM) simulations to systematically determine a set of design variables and characterized the static and dynamic properties of the fabricated FMU. We demonstrated that the FMU shows comparable performance to a widely used off-the-shelf sensor (Mini45, ATI) and can be used as a compact and accurate force sensor for various applications.

[1]  Jan Peirs,et al.  A micro optical force sensor for force feedback during minimally invasive robotic surgery , 2003 .

[2]  Bo Yang,et al.  Design and development of a 3-axis MRI-compatible force sensor , 2010, 2010 IEEE International Conference on Robotics and Automation.

[3]  Mamoru Mitsuishi,et al.  Development of a dexterous minimally-invasive surgical system with augmented force feedback capability , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[4]  H. Kazerooni,et al.  Biomechanical design of the Berkeley lower extremity exoskeleton (BLEEX) , 2006, IEEE/ASME Transactions on Mechatronics.

[5]  Tao Liu,et al.  A wearable force plate system for the continuous measurement of triaxial ground reaction force in biomechanical applications , 2010 .

[6]  Robert Riener,et al.  Assessment and training of synergies with an arm rehabilitation robot , 2009, 2009 IEEE International Conference on Rehabilitation Robotics.

[7]  M. Tomizuka,et al.  A Gait Monitoring System Based on Air Pressure Sensors Embedded in a Shoe , 2009, IEEE/ASME Transactions on Mechatronics.

[8]  Kaspar Althoefer,et al.  MRI-Compatible Intensity-Modulated Force Sensor for Cardiac Catheterization Procedures , 2011, IEEE Transactions on Biomedical Engineering.

[9]  Pablo Juan Garcia,et al.  Measurement of mortar permittivity during setting using a coplanar waveguide , 2010 .

[10]  H. Kajimoto,et al.  Optical torque sensors for implementation of local impedance control of the arm of humanoid robot , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[11]  H. Kawasaki,et al.  Development of a Hand Motion Assist Robot for Rehabilitation Therapy by Patient Self-Motion Control , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.

[12]  Bernard Bayle,et al.  Modeling and Evaluation of Low-Cost Force Sensors , 2011, IEEE Transactions on Robotics.

[13]  Steve Rothberg,et al.  Evaluation of thin, flexible sensors for time-resolved grip force measurement , 2007 .

[14]  Pyung Hun Chang,et al.  Stochastic estimation of human arm impedance under nonlinear friction in robot joints: A model study , 2009, Journal of Neuroscience Methods.

[15]  Pyung Hun Chang,et al.  Development of a one-body optical torque sensor for rehabilitation robotic systems , 2011, 2011 IEEE International Conference on Rehabilitation Robotics.

[16]  P. Veltink,et al.  Ambulatory measurement of ground reaction forces , 2005 .

[17]  Chang-Soo Han,et al.  Compact and lightweight optical torque sensor for robots with increased range , 2012 .

[18]  Oussama Khatib,et al.  Design and development of high-performance torque-controlled joints , 1995, IEEE Trans. Robotics Autom..

[19]  L.D. Seneviratne,et al.  State-of-the-Art in Force and Tactile Sensing for Minimally Invasive Surgery , 2008, IEEE Sensors Journal.

[20]  Jung Kim,et al.  Robotic system for hybrid diagnosis of prostate cancer: Design and experimentation , 2011, 2011 IEEE International Conference on Robotics and Automation.