Design of 3D-Printed Flexible Joints With Presettable Stiffness for Surgical Robots

Continuum manipulators have been widely used in minimally invasive surgery due to their high dexterity. However, different surgeries have different stiffness and dexterity requirements. This paper describes a continuum manipulator for robot-assisted surgery. The flexible part is a joint that can be 3D-printed using various materials. The flexible joints made of each material are of the same size but have different stiffness and dexterity. In this way, the appropriate stiffness can be preset by selecting a suitable manufacturing material according to specific surgical needs. Kinematic and static models of the proposed flexible joints were designed. A finite element analysis method was used to calculate the correction factors. We analyzed the workspace and stiffness differences between flexible joints made of different materials quantitatively and qualitatively, respectively. We conducted experiments to verify the accuracy of the static model and the stiffness differences between the flexible joints. Finally, several design variations were introduced, which demonstrate the unique advantages of these flexible joints in the field of surgical robotics.

[1]  Mohammad Elahinia,et al.  Modeling and Experiment of a Flexible Module Actuated by Shape Memory Alloy Wire , 2014 .

[2]  Dong-Ho Lee,et al.  A single port surgical robot system with novel elbow joint mechanism for high force transmission , 2017, The international journal of medical robotics + computer assisted surgery : MRCAS.

[3]  J. Geiger,et al.  A Novel Intuitively Controlled Articulating Instrument for Reoperative Foregut Surgery: A Case Report. , 2017, Journal of laparoendoscopic & advanced surgical techniques. Part A.

[4]  Byung-Ju Yi,et al.  A 4-DOF flexible continuum robot using a spring backbone , 2009, 2009 International Conference on Mechatronics and Automation.

[5]  Robert J. Webster,et al.  A Telerobotic System for Transnasal Surgery , 2014, IEEE/ASME Transactions on Mechatronics.

[6]  Kotaro Tadano,et al.  A Forceps Manipulator With Flexible 4-DOF Mechanism for Laparoscopic Surgery , 2015, IEEE/ASME Transactions on Mechatronics.

[7]  Thanh Nho Do,et al.  A survey on actuators-driven surgical robots , 2016 .

[8]  G. Shanmugasundar,et al.  Structural Optimization of an Five Degrees of Freedom (T-3R-T) Robot Manipultor Using Finite Element Analysis , 2019, Materials Today: Proceedings.

[9]  Guang-Zhong Yang,et al.  Design and Fabrication of a 3-D Printed Metallic Flexible Joint for Snake-Like Surgical Robot , 2019, IEEE Robotics and Automation Letters.

[10]  Sri Sadhan Jujjavarapu,et al.  Variable Stiffness Mechanism for Suppressing Unintended Forces in Physical Human–Robot Interaction , 2019, Journal of Mechanisms and Robotics.

[11]  Howie Choset,et al.  Continuum Robots for Medical Applications: A Survey , 2015, IEEE Transactions on Robotics.

[12]  Kotaro Tadano,et al.  A Pneumatically Driven Surgical Manipulator With a Flexible Distal Joint Capable of Force Sensing , 2015, IEEE/ASME Transactions on Mechatronics.

[13]  Arianna Menciassi,et al.  Finite Element Analysis and Design Optimization of a Pneumatically Actuating Silicone Module for Robotic Surgery Applications , 2014 .

[14]  Kai Xu,et al.  Development of the SJTU Unfoldable Robotic System (SURS) for Single Port Laparoscopy , 2015, IEEE/ASME Transactions on Mechatronics.

[15]  Alain Delchambre,et al.  Flexible Medical Devices: Review of Controllable Stiffness Solutions , 2017 .

[16]  J. Francu,et al.  TORSION OF A NON-CIRCULAR BAR , 2012 .

[17]  Lin Cao,et al.  Design and modelling of a variable stiffness manipulator for surgical robots , 2018, Mechatronics.

[18]  Marek Wartenberg,et al.  Prosthetic Jamming Terminal Device: A Case Study of Untethered Soft Robotics. , 2016, Soft robotics.

[19]  Y. Chen.  Torsion problem of rectangular cross section bar with inner crack , 1998 .

[20]  Pierre E. Dupont,et al.  Stiffness Control of Surgical Continuum Manipulators , 2011, IEEE Transactions on Robotics.

[21]  Karl Iagnemma,et al.  Design and Analysis of a Robust, Low-cost, Highly Articulated manipulator enabled by jamming of granular media , 2012, 2012 IEEE International Conference on Robotics and Automation.

[22]  Hesheng Wang,et al.  Development of a Novel Continuum Robotic System for Maxillary Sinus Surgery , 2018, IEEE/ASME Transactions on Mechatronics.

[23]  John Y. K. Lee,et al.  Transoral Robotic Surgery of the Skull Base: A Cadaver and Feasibility Study , 2010, ORL.

[24]  Giorgio Olmi,et al.  Influence of the build orientation on the fatigue strength of EOS maraging steel produced by additive metal machine , 2016 .

[25]  Ewout A. Arkenbout,et al.  Classification of Joints Used in Steerable Instruments for Minimally Invasive Surgery , 2014 .

[26]  Kaspar Althoefer,et al.  Tendon-Based Stiffening for a Pneumatically Actuated Soft Manipulator , 2016, IEEE Robotics and Automation Letters.

[27]  Chaoyue Chen,et al.  The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel , 2018, Additive Manufacturing.

[28]  Guang-Zhong Yang,et al.  Laser-Profiled Continuum Robot with Integrated Tension Sensing for Simultaneous Shape and Tip Force Estimation. , 2020, Soft robotics.

[29]  Zheng Li,et al.  Kinematic comparison of surgical tendon-driven manipulators and concentric tube manipulators , 2017 .

[30]  P. Breedveld,et al.  A state of the art review and categorization of multi-branched instruments for NOTES and SILS , 2015, Surgical Endoscopy.

[31]  T. Mower,et al.  Mechanical behavior of additive manufactured, powder-bed laser-fused materials , 2016 .

[32]  Ken Masamune,et al.  Variable stiffness outer sheath with “Dragon skin” structure and negative pneumatic shape-locking mechanism , 2014, International Journal of Computer Assisted Radiology and Surgery.

[33]  Pierre E. Dupont,et al.  A Steerable Needle Technology Using Curved Concentric Tubes , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[34]  Karl Iagnemma,et al.  A Stiffness-Adjustable Hyperredundant Manipulator Using a Variable Neutral-Line Mechanism for Minimally Invasive Surgery , 2014, IEEE Transactions on Robotics.

[35]  Ruxu Du,et al.  A novel constrained wire-driven flexible mechanism and its kinematic analysis , 2016 .

[36]  Arianna Menciassi,et al.  Toward a Variable Stiffness Surgical Manipulator Based on Fiber Jamming Transition , 2019, Front. Robot. AI.

[37]  Brian S. Peters,et al.  Review of emerging surgical robotic technology , 2018, Surgical Endoscopy.

[38]  Jessica Burgner-Kahrs,et al.  Stiffening Sheaths for Continuum Robots. , 2018, Soft robotics.

[39]  Md. Masum Billah,et al.  Smart Material-Actuated Flexible Tendon-Based Snake Robot , 2016 .

[40]  Mark Whitty,et al.  Robotics, Vision and Control. Fundamental Algorithms in MATLAB , 2012 .

[41]  Kaspar Althoefer,et al.  New kinematic multi-section model for catheter contact force estimation and steering , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[42]  A. Tuissi,et al.  Aging Behaviour and Mechanical Performance of 18-Ni 300 Steel Processed by Selective Laser Melting , 2016 .

[43]  Peter Kazanzides,et al.  Design and Integration of a Telerobotic System for Minimally Invasive Surgery of the Throat , 2009, Int. J. Robotics Res..