Control of Porosity in Parts Produced by a Direct Laser Melting Process

[1]  Young Hoon Moon,et al.  Selective laser melting of Fe-Ni-Cr layer on AISI H13 tool steel , 2009 .

[2]  A. Rubenchik,et al.  Calculation of laser absorption by metal powders in additive manufacturing. , 2015, Applied optics.

[3]  Moataz M. Attallah,et al.  Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V , 2013 .

[4]  J. K. Chen,et al.  Numerical simulation of laser irradiation to a randomly packed bimodal powder bed , 2009 .

[5]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[6]  Moataz M. Attallah,et al.  On the role of melt flow into the surface structure and porosity development during selective laser melting , 2015 .

[7]  Li Wang,et al.  Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting , 2010 .

[8]  Chester J. VanTyne,et al.  Process analysis of multistage forging by using finite element method , 2007 .

[9]  Moataz M. Attallah,et al.  On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting , 2015 .

[10]  Andrey V. Gusarov,et al.  Modeling the interaction of laser radiation with powder bed at selective laser melting , 2010 .

[11]  Filippo Zanini,et al.  Porosity testing methods for the quality assessment of selective laser melted parts , 2016 .

[12]  Filippo Berto,et al.  Fatigue Behavior of Porous Ti-6Al-4V Made by Laser-Engineered Net Shaping , 2018, Materials.

[13]  C. J. Tyne,et al.  Analytical model for prediction of sidewall curl during stretch-bend sheet metal forming , 2008 .

[14]  Young Hoon Moon,et al.  Functionally graded properties in directed-energy-deposition titanium parts , 2018, Optics & Laser Technology.

[15]  Jialin Yang,et al.  Densification behavior and mechanical properties of nanocrystalline TiC reinforced 316L stainless steel composite parts fabricated by selective laser melting , 2018, Optics & Laser Technology.

[16]  Galina Kasperovich,et al.  Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting , 2016 .

[17]  C J Van Tyne,et al.  Analytical prediction of springback based on residual differential strain during sheet metal bending , 2008 .

[18]  Abdolreza Simchi,et al.  Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features , 2006 .

[19]  Jack Beuth,et al.  Prediction of lack-of-fusion porosity for powder bed fusion , 2017 .

[20]  C. Colin,et al.  As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting , 2011 .

[21]  Taylan Altan,et al.  Manufacturing of Dies and Molds , 2001 .

[22]  F. Berto,et al.  Porosity effect on tensile behavior of Ti-6Al-4V specimens produced by laser engineered net shaping technology , 2018, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[23]  Brent Stucker,et al.  Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes , 2014 .

[24]  Q. Semeraro,et al.  Densification mechanism for different types of stainless steel powders in Selective Laser Melting , 2017 .

[25]  Y. Moon,et al.  Characterization of deposited layer fabricated by direct laser melting process , 2013, Metals and Materials International.

[26]  Yang Wang,et al.  Top surface quality research for direct metal laser fabrication , 2012 .

[27]  I. Yadroitsev,et al.  Heat transfer modelling and stability analysis of selective laser melting , 2007 .