A calibration method of redundantly actuated parallel mechanism machines based on projection technique

[1]  Tatsuo Arai,et al.  An implicit loop method for kinematic calibration and its application to closed-chain mechanisms , 1995, IEEE Trans. Robotics Autom..

[2]  P. Petrovic,et al.  Closed-Form Resolution Scheme of the Direct Kinematics of Parallel Link Systems Based on Redundant Sensory Information , 1999 .

[3]  Kornel Ehmann,et al.  Calibration of a hexapod machine tool using a redundant leg , 2000 .

[4]  Frank Chongwoo Park,et al.  Design and analysis of a redundantly actuated parallel mechanism for rapid machining , 2001, IEEE Trans. Robotics Autom..

[5]  Manfred Weck,et al.  Parallel Kinematic Machine Tools – Current State and Future Potentials , 2002 .

[6]  JongWon Kim,et al.  Design of a Parallel Mechanism Platform for Simulating Six Degrees-of-freedom General Motion Including Continuous 360-degree Spin , 2003 .

[7]  J. Jeong,et al.  Kinematic Calibration for Redundantly Actuated Parallel Mechanisms , 2004 .

[8]  Zexiang Li,et al.  Auto-calibration of a redundant parallel manipulator based on the projected tracking error , 2007 .

[9]  Alexander Verl,et al.  Measurement pose selection and calibration forecast for manipulators with complex kinematic structures , 2008 .

[10]  Woosung In,et al.  Design of a planar-type high speed parallel mechanism positioning platform with the capability of 180 degrees orientation , 2008 .

[11]  B. Muralikrishnan,et al.  ASME B89.4.19 Performance Evaluation Tests and Geometric Misalignments in Laser Trackers , 2009, Journal of research of the National Institute of Standards and Technology.