Compact and lightweight optical torque sensor for robots with increased range

Abstract This paper describes the development of a compact and lightweight optical torque sensor for robots with increased range. The torque generated can only be measured by placing a torque sensor on each joint, which makes the joint bulky and heavy adding extra load to be carried by robots. In this paper, we propose a compact and lightweight design for the torque sensor. This sensor can measure torque of robot's links by detecting torsion. The optical technique is used to detect angular displacement in the joints. As optical technique is immune to electromagnetic interference, light weight, and it also required simple electronics. The torque can be calculated by using torque and twist angle relation. The proposed design is simulated by FEM software (ANSYS), and it shows successful measurements of the torque with a load capacity of 100 Nm, which is sufficient for the torque generated in robot's joints. The designed optical torque sensor is manufactured by electrical discharge machining (EDM). The optical torque sensor is calibrated and several experiments are conducted to ensure its feasibility with the robot.

[1]  Zhenyuan Jia,et al.  A novel parallel piezoelectric six-axis heavy force/torque sensor , 2009 .

[2]  P. Famouri,et al.  Sliding mode-based microstructure torque and force estimations using MEMS optical monitoring , 2005, IEEE Sensors Journal.

[3]  Bo Song,et al.  Design of a micro six-axis force sensor based on double layer E-type membrane , 2008, 2008 International Conference on Information and Automation.

[4]  Aiguo Song,et al.  A novel self-decoupled four degree-of-freedom wrist force/torque sensor , 2007 .

[5]  Dan Zhang,et al.  A Novel Miniature Four-Dimensional Force/Torque Sensor With Overload Protection Mechanism , 2009, IEEE Sensors Journal.

[6]  B. Culshaw.  Optical systems and sensors for measurement and control , 1983 .

[7]  H. Kajimoto,et al.  Optical torque sensors for implementation of local impedance control of the arm of humanoid robot , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[8]  Oussama Khatib,et al.  Design and development of high-performance torque-controlled joints , 1995, IEEE Trans. Robotics Autom..

[9]  Alberto Cavallo,et al.  Optoelectronic joint angular sensor for robotic fingers , 2009 .

[10]  Gab-Soon Kim.  Design of a six-axis wrist force/moment sensor using FEM and its fabrication for an intelligent robot , 2007 .

[11]  Gianluca Palli,et al.  Force sensor based on discrete optoelectronic components and compliant frames , 2011 .

[12]  J. I. Qazi,et al.  Titanium alloys for biomedical applications , 2006 .

[13]  Olivier Lambercy,et al.  Thick-film multi-DOF force/torque sensor for wrist rehabilitation , 2010 .

[14]  A.M. Madni,et al.  A Differential Capacitive Torque Sensor With Optimal Kinematic Linearity , 2007, IEEE Sensors Journal.

[15]  Dan Zhang,et al.  Design and fabrication of a six-dimensional wrist force/torque sensor based on E-type membranes compared to cross beams , 2010 .